HOW TO INSPECT AND INSTALL A DIRT BIKE CLUTCH

No video

HOW TO INSPECT AND INSTALL A DIRT BIKE CLUTCH | Everything you need to know

Рет қаралды 9,212

Күн бұрын

In this one I'll show you how to Inspect and install a dirt bike clutch! When we ride this thing takes all the abuse. We hit on everything you need to know, from checking wear items, measurements, and replacement.
Thanks for watching, if you enjoyed the video give it a like and please subscribe to the channel! Share it with your friends and we will see you in the next one!!!
⬇️ As always the links to the tools, parts, and equipment I use are listed below! ⬇️
---Must have Reading Material!!---
The Four Stroke Dirt Bike Engine Building Handbook: amzn.to/2Y7NvL5
The Two Stroke Dirt Bike Engine Building Handbook: amzn.to/39QlE4e
-----Clutch Inspection Gear-----
∙Rotella T4 15W-40 Oil: amzn.to/3APRnyE
∙0-3" Outside Micrometer Set: amzn.to/3Nr0Rqa
∙Electronic Digital Caliper: amzn.to/3NgDzmF
∙Milwaukee M12 Drill Driver/Impact Kit: amzn.to/3NXICYW
∙Sunex 9840 Pick Set, 4-Piece: amzn.to/3xlm679
∙T-Handle Wrench Set: amzn.to/3roqtK2
∙Torque Wrench 1/4" Drive Inch/Lb: amzn.to/3iCKs3o
∙Torque Wrench 3/8 Drive Ft./Lb: amzn.to/3xYrJ8X
∙Maxima Assembly Lube: amzn.to/3kHssrj
∙Maxima Contact Cleaner: amzn.to/36SfXBq
∙Maxima Waterproof Grease: amzn.to/3zro7wK
-----GoPro Mount-----
∙Dango Design Gripper Mount: amzn.to/36ytQEk
-----Check out my Camera Gear-----
∙Canon EOS M50 Mirrorless Camera: amzn.to/3r2vLus
∙Drone: DJI Mavic Min 2: amzn.to/3wti9cF
∙Rode VideoMic On-Camera Microphone: amzn.to/3ARmDgM
∙Joby Handypod Mini Tripod and Handgrip for DSLR: amzn.to/3xxIyYo
∙Joby Gorillapod 3K Pro Kit: amzn.to/3hvIBhC
∙GoPro Hero 7 Black Edition: amzn.to/3ww0LnB
∙K&F Concept DSLR Camera Tripod: amzn.to/3wz7ldg
∙FeiyuTech G6 Max 3-Axis Handheld Gimbal Stabilizer: amzn.to/3AQCps5
∙Canon EF-M 11-22mm f/4-5.6 STM Lens: amzn.to/3wtirQN
*Disclamier - As an Amazon Associate I earn from qualifying purchases.*
-----Join me on Social Media-----
Instagram: / danmx2112
#danmx #howtoreplacedirtbikeclutch #dirtbikeclutchinstall

Пікірлер: 27

@troyswarts7353 3 күн бұрын

Didn’t know you could do this without drawing oil, great video helps a lot for someone like myself that hasn’t done this before.

@DanMX2112 3 күн бұрын

@@troyswarts7353 yes sir, pros do it after every race at the track, super handy how they designed these motors for the purpose. Thanks for watching, I appreciate you!

@TNcountrylife 2 жыл бұрын

New to dirt bikes glad I found your channel. Love the video.

@DanMX2112 2 жыл бұрын

Nice, glad it’s helping you out. Reach out if you need anything and glad to here we have another guy shredding!!!

@ninty1designs60 2 жыл бұрын

Just had to replace both inner basket and outer basket cause they were grooved so badly! Great Video man! Clutch looks fantastic for that many hours!

@DanMX2112 2 жыл бұрын

Thanks dude, your bike is gonna be so smooth with those new parts. Huge difference!

@michaelgarland579 2 ай бұрын

I use regular 10*30 oil q

@paytonemmons4952 Жыл бұрын

Very helpful Thankyou!

@DanMX2112 Жыл бұрын

Thanks Payton, I appreciate the feedback and glad to help!

@Jrod_FPV Жыл бұрын

The book mentions flatness spec for the metal plates... That's also important to measure and make sure within spec. If out of spec it will cause clutch drag.

@DanMX2112 Жыл бұрын

Right you are sir! Warped plates are no good and cause friction when disengaged. Thanks for the tip!!!

@TheMadMonkey3 5 ай бұрын

Wow just what i needed, great video. Gonna check the clutch on my ‘18 wr250f. Hope you keep up the dirtbike videos! Super helpful! Thanks!!

@DanMX2112 5 ай бұрын

You’re welcome, and yes I will once I’m done sledding! Thanks for watching and let me know how it checks out!

@KlipTastiC 10 ай бұрын

Ima sub this dude. He’s so true he picked for gold and didn’t give a fuk about it. Haha love it. Good video bro. This helped me remember which way the plates go back in. Thanks and hop to see your next vid soon buddy!

@DanMX2112 10 ай бұрын

Thanks for the sub, glad you got help from it bro!

@michaelgarland579 2 ай бұрын

I have yz125 2003 an i have new clutch plates 6 months ago 80 hours how long do they last?? Will clutch slip

@DanMX2112 2 ай бұрын

I ran a set of plates for 120 hours, of course it was a mix of tracks and desert free riding. It’s not uncommon if you shift correctly and limit clutch in that it last for a long time. Worst thing on a clutch is using it when not necessary. Learning to shift correctly, with and without the clutch is key to long clutch and engine life. I use Rotella T4 15w-40 and it’s all I use in all my bikes. As long as it has no friction modifiers, your 10W-30 will be fine:

@connorhaney6965 5 ай бұрын

When I pull my clutch in there is no roaring but if I let it out in neutral I hear a good bit of roaring should I look into the push rod bearing? Where is a good place to start thank you

@DanMX2112 5 ай бұрын

I would pull the clutch apart and check the basket for wear. Those YZ's are famous for a bit of clutch noise at idle. If it performs well and you have no other issues, give it a quick look and see if anything looks off. I doubt the push rod bearing is the issue, but again give it a look. Thanks for watching, hope you come out good.

@zombieskiller1762 8 ай бұрын

Does it matter about the way the fibers go in or are they all the same on a new clutch

@DanMX2112 8 ай бұрын

Not really, most fibers and steels have a tapered or sharp edge on the outside, and I try to keep it consistent on them facing the same direction as I talk about in my video.

@robertcheney6753 7 ай бұрын

Hello I have a question, I took out my plates and springs the other day , I have a 2008 ktm 200 xcw the book says the springs should be 39 mm or 40 new, all the springs I took out were 35mm. So I took off the basket filed it a little and I think I will get a new tusk clutch kit. I’ve already rebuilt slave and master cylinder’s so I’m thinking someone put in wrong springs and it might work. What say you Thanks for reading.

@DanMX2112 7 ай бұрын

I will always say run spec, so replace and run what KTM says. When in doubt, use manufacture specs.

@ProvingMyDispute Жыл бұрын

Hello! So I have a 2012 CRF 250R the issue I am having is when I put the bike in 1st it’ll wanna move with giving it any gas and then it’ll die. When I pull the clutch lever in I can see the pressure plate move. I have not taken the clutch plates apart yet I plan on to. Do you think it’s more than likely bad plates or worn out cable? When I’m riding the clutch sometimes seems to not engage or have to hit the sweet spot for it to shift

@DanMX2112 Жыл бұрын

Cable adjustment is an easy fix, nickel in between the lever and perch. More than likely you have a grooved basket or issues otherwise with the inner hub and plates. Most times the basket grooves and clutch won’t disengage, causing the issues your describing.