For more information on our products, visit www.raceland.com. #hondacivic #civiccoilovers
Пікірлер: 26
@rickycraftyt5 жыл бұрын
there is a possibility to ajust the height? i just want to drop it 1 inch ..
@racelandsuspension5 жыл бұрын
Yes. They are adjustable between 1-3 inches below stock ride height.
@jarekmai5 жыл бұрын
Which coilovers do I order? The website has like 3 different sets and I’m looking for a set that can fit my 2014 Civic Si.
@racelandsuspension5 жыл бұрын
For the 2014 SI, you'll need this kit raceland.com/honda-coilovers/civic-2012/honda-civic-si-9th-gen-coilovers-2014-2016.html
@xLAKERBOY101x4 жыл бұрын
What size socket is used to remove the nut located at the bottom of the shock that connects to the hub? I know the internal of the nut is 16mm but having a hard time finding the actual socket size
@zaybolean27292 жыл бұрын
For mine it’s a 19 and a 21-22 I forgot which one. The 19 goes over the bolt and the 21-22 over the nut.
@kyrdlmao22224 жыл бұрын
Just wondering do the 2015 Honda civic coupes not come with top hats?
@racelandsuspension4 жыл бұрын
Correct. They are made to be used with the stock upper strut mounts.
@syedmesumraza11435 жыл бұрын
Hey guys can you make an install video for 02-06 Rsx it would really help people who are getting coils overs to lower their ride
@racelandsuspension5 жыл бұрын
Yeah. We actually already did one. kzfaq.info/get/bejne/Zqd8dNGC0Zuzqpc.html
@realreviews56933 жыл бұрын
I ordered this set for my 2014 civic LX sedan. I am purchasing new upper strut mounts. I would like to keep my oe struts in tact. Do new upper strut mounts come with new insulators? Also if I have to order new aftermarket insulators what size will I need?
@racelandsuspension3 жыл бұрын
They should come with everything you'll need.
@ivxant28964 жыл бұрын
For step #8 do we need to use spring compressors or is there another way of doing it ?
@racelandsuspension4 жыл бұрын
You will need to use spring compressors to safely remove the upper mounts from the stock struts.
@techknoic8745 жыл бұрын
What are the wheel specs for this . I am just wondering if my 18” 8.5 width would rub at all if I only drop it like 1.5” or 2” also just wondering how long the process is to install
@Litto13 жыл бұрын
What about preload for the front and rear?
@racelandsuspension3 жыл бұрын
With that kit, the preload is what determines the ride height so that is up to you.
@Hvrtvnskehcb73 жыл бұрын
When installed the fronts my stock front wheels rubs against the coilover springs? What could be the issue?
@racelandsuspension3 жыл бұрын
Your wheel offset sounds like it isn't high enough to be running at that ride height. You may need to run wheel spacers to space the wheel further from the suspension.
@JuanCastro-jd4hl2 жыл бұрын
My right rear spring is compressed did I get a bad shock? Or is this normal ?
@racelandsuspension2 жыл бұрын
Give us a call when you have a moment, and we'll run through some troubleshooting with you. Our number to call is 801.365.1440.
@danielalbarran46283 жыл бұрын
do we lock the height on the rears?
@racelandsuspension3 жыл бұрын
Because there aren't any lateral forces like front has with the steering, a locking collar isn't necessary for the rear.
@jean-carlomenjivar48884 жыл бұрын
why do you have to cut the insulators?
@racelandsuspension4 жыл бұрын
You need to cut them to fit the direction of the spring.
@The123mick4564 жыл бұрын
So the insulation will no longer do on the original damper?