How to Install a Cummins Compound Turbo | 3rd Gen Dodge Ram

How to Install a Cummins Compound Turbo | 3rd Gen Dodge Ram | Power Driven Diesel

Рет қаралды 84,641

Күн бұрын

In this video, Baron installs a PDD compound turbo kit on a 3rd Gen Dodge Ram. Follow along for a closeup view of the installation process!
Pick up the best compound turbos for your Cummins in the shop: powerdrivendiesel.com/product...
Get low prices on the best parts for your Cummins: powerdrivendiesel.com/product...
Power Driven Diesel is a specialty performance shop engaged in the engineering and development of high performance turbo diesel technologies.
1 435 962 9555
powerdrivendiesel.com
/ powerdrivendiesel

Пікірлер: 128

@LivingOnWheels 2 жыл бұрын

Cant tell you how nice it is to see a company making high quality videos on their products! Would love to see you have an option to get a transmission heat exchanger delete pipe with the kit.

@justinedwards5221 2 жыл бұрын

This is awesome. Installed this kit last month and spoke with Baron on the phone and he offered to answer any questions I had. Amazing customer service.

@dedwards0117 Жыл бұрын

Would have been nice to see it run

@pddofficial Жыл бұрын

you can in the we dyno'd everything in the parking lot video

@hallasnackbar1865 2 жыл бұрын

My 3rd gen is about 2 weeks out for a set of compounds (just waiting for them to show up). Can't hardly wait.

@shaunpc2512 Жыл бұрын

What a awesome setup it is that you have put together, makes me want to go and compound charge one of my projects. 👌🏻

@pddofficial Жыл бұрын

You should!

@zingzong5 2 жыл бұрын

Do I own a Cummins… nope Have I only ever had power strokes… yep Why’d I watch this video…. Idk but it was highly informative and also who doesn’t love compounds

@pddofficial 2 жыл бұрын

Thanks for the comment

@taylormoesly3738 2 жыл бұрын

Love the install videos!!

@David_TX 2 жыл бұрын

Sick!! Let's see a 4th gen!

@windage 2 жыл бұрын

when you have taken so many Ford cabs off to access engine, you simply yank the Dodge cab off for filming...love it.

@pddofficial 2 жыл бұрын

Thank you for the comments

@djstrucking1385 2 жыл бұрын

Good Job Baron. We miss you in the crushin world.

@colinlawrence2186 2 жыл бұрын

Hi Baron that was a great video I'm sure it's going to motivate a lot of people Just one question will it fit on a 4th jen PDD don't do much for the 4th jen trucks I would be willing to bring you my truck for R and D Take care stay safe and God bless you 🙋‍♂️ 🇬🇧

@MK-ng5fp 2 жыл бұрын

use a magnet next to your drill bit to keep shavings off

@Sdukes001 2 жыл бұрын

That is one clean set up!

@xenomethean9304 2 жыл бұрын

I can't wait to get the money to do this!

@michaeltrue1143 2 жыл бұрын

I would just knock the plug in the pan it won't hurt anything be better than metal shavings falling in there. Very nice video good job guys!

@TonytheCarEnthusiast 2 жыл бұрын

the filter’s there for a reason and its gotta go at the filter first then go where its supposed to go

@Rx7man 2 жыл бұрын

@@TonytheCarEnthusiast only thing is the filter is after the oil pump, so the shavings go through that first you could put a dab of grease in the plug that would catch the shavings though

@davelariviere682 2 жыл бұрын

If you don’t have an S&B….get☝️ Clean set-up👍

@toddsculley2710 2 жыл бұрын

Love to see u guys r hard at it. I been saving up for compounds on my 2nd gen 12 valve. But in lu of Oxford high shooting where we live have given all we can to support the families of the victims (Go Wild cats) pray for them they need it !!

@erikkovacs3097 2 жыл бұрын

Nice to see that even the pro's don't use the correct tool to remove spring clamps.

@Itsa_Mea 2 жыл бұрын

He's just showing you how the common man can do it at home since not everyone has the correct spring clamp tool. 😉

@erikkovacs3097 2 жыл бұрын

@@Itsa_Mea Well everyone should get one because it is nothing less than a game changer.

@Itsa_Mea 2 жыл бұрын

@@erikkovacs3097 agreed! I got the cable ones that allows you to get in tight places where pliers can't. Definitely a must have.

@quintenstratford4735 2 жыл бұрын

When are we going to see the godfather make 3000hp? Keep up the awesome work

@kwlowboy7838 10 ай бұрын

Looks great thank you 👍🏻

@pddofficial 10 ай бұрын

Hope you enjoy

@PoliticalGangster 2 жыл бұрын

Great video

@champony6245 2 жыл бұрын

Awesome video I can’t wait to twin my 11 Cummins! Also I learn that 35ftlbs is equivalent to 2 oogah dogahs! Lol

@justinschooler6243 2 жыл бұрын

Sweet, haven't put my pdd compound setup on yet, I've had it for months lol

@Balakay9435 2 жыл бұрын

Same here lol my kit sitting for a while to

@mitchvankesteren6771 2 жыл бұрын

I wish I had the self control to let new parts sit around! The day they show up, I’m tearing my truck apart that night after work and potentially not sleeping until it’s done for the next day hahaha

@justinschooler6243 2 жыл бұрын

@@mitchvankesteren6771 Lol I use to be like that, I have 5 diesel trucks tho. I'm always doing something to one of em

@mikemoya1201 2 жыл бұрын

The PDD gang is dialed in

@bernhard8540 2 жыл бұрын

It's a good idea if you lift the cab, to get the rear freeze plug kit to get coolant flowing better by cylinder 6 also because that's where the cummins has a tendency to have heat issues is typically cylinder 5 and 6 mostly 6 ❤️

@pddofficial 2 жыл бұрын

yes it was done off the video

@Gene4666 Жыл бұрын

Def seems much easier with the cab off. But love it.

@michaeltrue1143 2 жыл бұрын

Sure would like to have one! It would look nice on my rig i don't know what low egts look like lol

@capitansuarez3231 Жыл бұрын

Amazing

@kingbob1376 2 жыл бұрын

I don't know if your video editor looks at these, but could y'all ask him if there is anything that resembles a 🔇 In his editing software? Thanks!

@Upliftyourbrothers 2 жыл бұрын

Why not second gen swap the manifold at the same time to make better flow and keep rear cyl cooler?

@Twankiejones 2 жыл бұрын

Need a good video of the truck out running and all

@3rdGenCummins Жыл бұрын

Please please show a driving video and dyno! To show what it’s like

@hambuga69 2 жыл бұрын

Great video, kinda sad to not see it rip after the install.

@pddofficial 2 жыл бұрын

Maybe someday

@9408xavier 2 жыл бұрын

How so you order the exact package I already look that link and doesn't give you that option

@diezlfreak 2 жыл бұрын

Will it work with a fleece cheata also?

@mattwarner6599 2 жыл бұрын

That is my next setup. Right now I have a BD Ironhorse kit on with a 63/78 turbo. Wonder if this kit will work together or if i have to go stock?

@pddofficial 2 жыл бұрын

This kit "should" work with any he351 variant of charger.

@mattwarner6599 2 жыл бұрын

@@pddofficial Thanks a bunch. Awesome video

@deanstout1134 2 жыл бұрын

Sweet!!!

@pwrhgry1480 2 жыл бұрын

Files are uno directional bud. Love the vidyo any difference on the late 3rd gens with the 6.7 with shit missing?

@pddofficial 2 жыл бұрын

we have never tried to install this system on a 08 or newer.

@brianrichardson7946 Жыл бұрын

Can the exhaust side of the turbo housing and exhaust piping be ceramic coated? Haven't seen anybody doing it and as I am not experienced at all with diesel engines I was just curious

@pddofficial Жыл бұрын

Absolutely! We have done them. Keeps them looking nice

@truthhurts4555 2 жыл бұрын

Would be nice to see it run

@pddofficial 2 жыл бұрын

Hi here is the link of the dyno pull on it kzfaq.info/get/bejne/pt1gnc6KxszHc58.html

@waynotraffo9221 8 ай бұрын

That $100 heater tube is now $900 from dodge for my 2004.5 in Canada Still $125 on rock auto....

@bigmurph1447 2 жыл бұрын

I want to see u install the compound kit with the cab on.

@Gixzer04 2 жыл бұрын

I mean…. Did it get connected to an intercooler or what?

@cornishcat11 2 жыл бұрын

is it me or is that from tyre wrecked? 26.34

@HammerHead524 2 жыл бұрын

Still need to add little bit of oil in new turbo before installing feed line?

@allenstyer205 2 жыл бұрын

Either that or crank it with the injectors unplugged for a minute to get oil pressure to it

@adrianmilissa9271 2 жыл бұрын

You recommend head studs for this setup? If so which I am sure you will what stud would be sufficient? Adrian

@dontworryaboutit1 2 жыл бұрын

Yes you'll want studs, I used arp 2000s with a slightly larger compound setup so I'd say they're sufficient for this. Ifg and optitorque also make good studs.

@pddofficial 2 жыл бұрын

For sure. I really like the opti torque torque master studs. The arp 2000 are good as well but I had this set very close to 1k hp and I like a better stud at that level.

@motorfntrash4254 2 жыл бұрын

@@pddofficial twin turbo

@ChalupaxX1 2 жыл бұрын

Could you make a 2nd gen swap with compound turbos for an 06 5.9

@pddofficial 2 жыл бұрын

No sorry we do not do one off setups.

@larrychristopher9147 2 жыл бұрын

Assuming you guys don't like never sieze, 'Oring' lube or loctite. Not sure I'd remove that freeze plug like that🧐

@stiffdrinkmime366 2 жыл бұрын

Yes!

@pddofficial 2 жыл бұрын

You're first, congrats!

@GMCJay_lly 2 жыл бұрын

🍪

@sailingcitrinesunset4065 9 ай бұрын

Is that airbox air tight and suck in 100% of the air from the front grill or wheel guard?

@pddofficial 9 ай бұрын

Yes the S&B is a sealed box.

@sidewaysstarion 2 жыл бұрын

I was noticing the truck in the video doesn't have head studs, is it safe to run this setup on a stock fuel truck with stock headstuds?

@pddofficial 2 жыл бұрын

no it is not safe to run with out head studs after we finished the video we installed head studs, a 178/208 cam, stage 2 pushrods and 4.5 valve springs. and 30% over DDP injectors.

@Rich-ni2ol 2 жыл бұрын

Love how he says 35ft.lbs and proceeds to deadlift the truck using the wrench lol.

@josecabral220 2 жыл бұрын

Can we still run a exhaust break with a twin set up like this ?

@pddofficial 2 жыл бұрын

It would have to be a remote mount style after the s400.

@erickhernandez-tu3oj 11 ай бұрын

Do you need a tuner or bigger injector in order to install this turbo?

@pddofficial 10 ай бұрын

No injector needed works great with stock fueling a tuner is highly recommended whether it be custom or at least a smarty so6.

@adventureoverland2984 2 жыл бұрын

I have an 07Ram with a 5.9. Is there a way to make my PacBreak exhaust break still work with this system?

@pddofficial 2 жыл бұрын

Is it one that mounted off the turbo?

@adventureoverland2984 2 жыл бұрын

@@pddofficial Yes. It is. Thanks

@Big_body 2 жыл бұрын

I cringed a little when the air box went on, but I couldn’t tell if the pipe from the small turbo to the intercooler was on.

@justinschooler6243 2 жыл бұрын

Takes me 5 hours and a case of beer just to change my oil lol

@trevorhelmsley388 Жыл бұрын

How does an exhaust brake work with this? What brand is recommended?

@pddofficial Жыл бұрын

They work great! You can either use Pac Brake or BD diesel inline

@trevorhelmsley388 Жыл бұрын

@@pddofficial thanks, also where does the brake usually install at in this assembly?

@roelangel2008 2 жыл бұрын

something like this for 2nd gen?!

@wayne3546 2 жыл бұрын

How much does it cost

@michaelchristopher9444 2 жыл бұрын

Drill into that oil drain port sketches me out. Is there any other way to do that. Could you just punch it out and leave it in the bottom of oil pan?

@4wdiesels 2 жыл бұрын

Have a friend hold a strong pencil magnet to it off to one side as you punch on the opposite side with a small punch. Most of the time the plug will cock sideways in the bore and the magnet just gives it more reason too. Then you can yank it out with a needle nose pliers.

@4wdiesels 2 жыл бұрын

Another thing you could try is to screw in a sheet metal screw into it, the none self drilling type. Once you do, you could use a slide hammer to yank it out. You may still get a small amount of shavings in the pan but it would be way less than using that drill or a self drilling screw. I would still change the oil when done.

@brodyscrivner2343 2 жыл бұрын

All this on stock headbolts?

@pddofficial 2 жыл бұрын

Not for long...

@fortnitemobilevidvid9643 2 жыл бұрын

We need a video for 2nd gens

@pddofficial 2 жыл бұрын

kzfaq.info/get/bejne/idiHgJh7v66pZ30.html

@Engine_biulds Ай бұрын

When will this be back im stock

@pddofficial Ай бұрын

Depends auto or manual?

@christianleveron1997 2 жыл бұрын

Do a compound set up on a VP 2nd gen!!

@GMCJay_lly 2 жыл бұрын

Been done MANY times...

@marcushert2759 2 жыл бұрын

They have one…

@christianleveron1997 2 жыл бұрын

@@marcushert2759 I couldn’t tell I’m half retarted…

@Rx7man 2 жыл бұрын

same kit should be a pretty close fit on a 2nd gen as well, you'd just need the 3rd gen manifold and HE351CW as well

@IvanovSuperturbodieselProjects 2 жыл бұрын

What name of big one turbo in your setup?

@pddofficial 2 жыл бұрын

It is the Borg Warner 472sx-e

@IvanovSuperturbodieselProjects 2 жыл бұрын

@@pddofficial thanks bud!)

@ChannelZeroOne 2 жыл бұрын

On the Ac line thing. They like to come unseated. Not the end of the world, but dont be surprised if it happens to some of you.

@LRose6.7 Жыл бұрын

They have this for 4th gen

@pddofficial Жыл бұрын

no sorry only 03-07 5.9

@chrischapman7452 2 жыл бұрын

That is not the way to remove block drain plug lol woah!

@Metalwolf765 2 жыл бұрын

You’re great in front of the camera, now you need a lavalier microphone.

@rossbrowning2669 2 жыл бұрын

Did I miss the intercooler piping install? Lol

@pddofficial 2 жыл бұрын

no you did not, because you can technically still run the factory boots we did not feel it was necessary to show how to install the intercooler boots in this video.

@questforknowledge750 Жыл бұрын

Compound no head studs?

@pddofficial Жыл бұрын

They did put head studs in just did not show it in the video

@questforknowledge750 Жыл бұрын

@@pddofficial I have ARP 425 head studs but have seem people saying you need 625 any thoughts on this?

@pddofficial Жыл бұрын

@@questforknowledge750 arp 2000 work fine below 700hp

@Wrenchturner95 2 жыл бұрын

Dear Santa…

@toddsculley2710 2 жыл бұрын

I been saving to get compounds for my 2nd gen but in lu of Oxford high shooting and living in Oxford some has been give to support the Oxford families. Go wild cats. (Always worth it to give anything u can to help) pray for us we need it !!