Installing a home theater subwoofer from www.lavasubs.com
Пікірлер: 338
@mikeray23718 жыл бұрын
Thank you for not starting the video with a long introduction about what your doing. You are like the only one who has ever done that. Just get straight to the point. Awesome!
@corolex8 жыл бұрын
+Michael McDonald I agree with this comment!
@chicago16808 жыл бұрын
plus no crappy music
@KINGDUDE746 жыл бұрын
I know, I cant stand that, Some intros are so long with loud techno music.
@edwardchristiano1056 жыл бұрын
My front speakers do have sub woofers in them. Why would I need another sub woofer
@rigobertomatamoros78356 жыл бұрын
Agree! Direct to the point yes thank you.
@kondordv4 жыл бұрын
Finally a great video to understand everything about subwoofer connections.
@victorsanabia3513 жыл бұрын
666776
@packmack784 жыл бұрын
Dude you know how hard was to find this simple but yet so helpful channel?? Thanks
@calebvasquez12 жыл бұрын
I actually bought a $500 subwoofer, but because I watched your video, I did not know there was a fuse that was easy to access.. so I checked it and it was out, bought a new one and my goodness it worked. Thanks, I will still keep it and put it in my son's room.
@virayudh Жыл бұрын
12 years old video but none of recent video could beat your video, very helpful thanx a lot
@juanmadrigal39144 жыл бұрын
Short sweet and straight to the point. Thank you so much.
@xkuruma12 жыл бұрын
oh MAN thank you!. You explained everything a lot better than my klipsch subwoofer's manual! Now I know what everything does, thanks!
@macrapidito18 жыл бұрын
Very well explained. I was clueless before this video!! THANKS FOR THE INFO.
@tehberral4 жыл бұрын
*short, sharp breath* Immediate explanation. Love it.
@chriskeenan16 жыл бұрын
Thanks. Well explained and concise. Just great for newbies like me.
@rgoodpa110 жыл бұрын
Thanks a bunch. I was unaware not using the frequency dial when using LFE (until now)
@scottcooksey5284 Жыл бұрын
LFE means low frequency effect, it's a channel in movie soundtracks only, not used in music 2 channel stereo.
@bakomeshe2 жыл бұрын
Thank you very much for your video. You really answered all my questions regarding the subwoofer setup. Please continue with your excellent work.
@markanthony58973 жыл бұрын
I had a situation and I am offering this additional information: I could not get sound out of my sub and I tried every hookup. Until I realized my receiver has volume adjustments to each individual speaker, L,R,CENTER,SR,SL,SUB. Remember to check the the SUB volume is not off or all the way down in the settings of the receivers menu/mode options. Good luck.
@exciter3005 жыл бұрын
Brilliant Straightforward Review! Thank you very much!
@AudioElectronicsChicago4 жыл бұрын
Great videos, I see most of the subs nowadays use the RCA inputs/outputs
@HeyYall39810 ай бұрын
Short and sweet. This is the best! Thank you!
@fifer5010 жыл бұрын
Very clear and helpful presentation! Thank you
@Ph0t0bug7 жыл бұрын
Nice. Thanks for the vid. Just picked up a Subwoofer someone was just tossing and really didnt know how to hook it up. This helped a lot.
@datrandom9 жыл бұрын
Thanks so much you guys. My sub hooked right up and the system sounds great!
@boostmeup91617 жыл бұрын
how can i connect my twice sony subwoofer using the black red cable ...??
@rgeraldalexander42783 жыл бұрын
Very helpful, having purchased a used sub with no manual. Thanks!!!
@ArshadHaroon9 жыл бұрын
Hi, this is very informative video and thanks for sharing. I have one question though that I am trying to ask and have no got my answer clearly. I have been using the option three for connecting my sub woofer through the red and black speaker in puts and out puts and then I use just once the option for hook up cable in to red and white ports. Does it make a difference in sound if we use the connections to Sub woofer using the "red and white cable ports" OR using the "Red and black spring clipers", Thanks.
@makemehotp10 жыл бұрын
Great explanation! Thanks for sharing. I'm a home theatre newby.
@justinboggs34273 жыл бұрын
The only thing I ask is which one would you prefer and which one would deliver the best quality out of the three
@omak236eriepa72 жыл бұрын
Finally a video easy to understand thanks
@1oneguythat9 жыл бұрын
great video thanks for not ranting, but where could I buy that amplifier alone? please and thankbyou
@bibabara7603 жыл бұрын
Hi, when you put a second cable (y) in to left and right line, how does the cable look in the other side? Its a single rca?Thanks.
@fabiuh99111 жыл бұрын
if you set the subwoofers on diferent phase positions they will cancel each other out, the phase switch gets usefull when you want to place the sub behind the listening position(to match the front speakers phase or if you have one in the front and one in the back(in this case you must reverse the back one only)
@Orlex3 жыл бұрын
Thank you! Exactly what I needed
@gforce4all9 жыл бұрын
Have a question.Does the bass control on my receiver affect the sub out or just the speaker outs?
@Kooooshball9 жыл бұрын
It does
@grinningintheirface26854 жыл бұрын
Thank you. Man, just got a dcm tb1212 at Christy's auction for twenty bucks!!! Dual 12 inch subs!! Thing is ridiculous!!!
@trencher76 жыл бұрын
So if I only have a single coax cable out from receiver and no LFE, I thought I could just plug it into either left or right input on sub. I need to buy a splitter?
@mukeshverma07074 жыл бұрын
Excellent video, great explanation.
@leftspeaker20005 жыл бұрын
Do the twin RCA low level input still go to the LEF on the back of the amplifier ?
@dualdubmix12 жыл бұрын
how do i install new amp for my home theater subwoofer any help will work video possibly unhooking amp and re install??? thanks
@CK20128 жыл бұрын
I have a older sub woofer that has a Phase dial on it connected to a Pioneer SC 1222 is there something i need to do or do I do the same with the crossover frequency and turn it to the min
@philjagdon67743 жыл бұрын
My amp has LFE and speaker connection. Would it be better I use the speaker connection +- so I can use the frequency dial as well ? Thanks
@kevindad97633 жыл бұрын
Have a question: If I use the "Surround Back/Zone 2/Bi-Amp" output on my receiver YAMAHA (RXV6A) to Bi-Amp the front speakers, then can I connect the Music cast to surround output!?
@joelane46704 жыл бұрын
On He’s burger home 8 inch poke subwoofer, what should the OBD be set at. I have mine set at -10.odb
@mohnnadbshara9 ай бұрын
The only video I found that is very helpful ❤❤. Thank you.
@jeromevet0078 жыл бұрын
When using this setup can you still hookup speakers to this channel , or do you need to sacrifice the outputs. does the sub only uses a signal from the wires ? , i have a HQ-HT DIY sub and can't use it. So i want it in my car. ( power converter etc ) . but i want to know if i split the rear channels and connect them to the rear speakers and sub will it still work . or do the rear speakers only get half the power ?
@Dvonbringsdaknowledge12 жыл бұрын
I'm getting a SA-W2500 and I wanted to know if you have to have a specific wire for each diffrent sub or is it the same?
@mzmz93554 жыл бұрын
Hello, the setup for high level input was not clear for me. In case I have a stereo integrated amp - how exactly do I connect the sub or 2 subs to the amp provided that I want to keep the main speakers powered from the amp? Thanks
@superarsenal0094 жыл бұрын
For low level input do i need to connect to both white & red or just one is fine? If just one is fine, then which one?
@2009thread112 жыл бұрын
so if you have an amplifier with just a left and right output you can connect a subwoofer with speaker wire from the left and right straight into the subwoofer ?
@abdullahvlogs2487 жыл бұрын
can we connect sub woofer using rca an connecting the sub will it work with kv sub
@alonzoperez19695 ай бұрын
Hi I have a integrated amplifier 2.1 but my subwoofer has left and right output speakers on the back my question is if I want a 3.1 can I connect the center speaker behind the subwoofer using one right channel output? Does that make sense or it will sound awful? Please explain? Thank you.
@jazzman16266 жыл бұрын
On a 2 channel system, instead of running another speaker wire from the same speaker out, to the subwoofer, can you just run a speaker wire from the speaker to the subwoofer?
@jasperdany Жыл бұрын
Can I connect the High level input directly to passive speakers and would it work ?
@b.a.d.psychofpv12742 жыл бұрын
Need I use in high level inputs both Channels? And with any impedancy ?
@dominican11ful3 жыл бұрын
Help please 😣. I just bought a Jamo sub 200 second hand with some connection us yours the sub is working but no sound from the speakers I was wondering is I need a receiver to connect the speakers thanks
@Mistygio3 жыл бұрын
Big thanks! Very helpful
@togatx10 жыл бұрын
Dumb question here but what direction do the arrows on the Audioquest Irish Red subwoofer cable point when connecting a HSU VTF 15H subwoofer to a Pioneer Elite VSX AV??
@Sankman6 жыл бұрын
I have 5.1 system of Philips. Bass not fine which is 6.5 inches. Can i cut the wires of subwoofer and install subwoofer such as 8 inch or more in another box? System is 96 watt. Can i connect passive woofer replacing inbuilt woofer of the system?
@ucbookman9 жыл бұрын
I want to connect a subwoofer to an old HK AV receiver with two Energy speakers already attached. But it'll be STRICTLY for audio (turntable) no home theater. How can I properly connect it so the bass sounds natural and not boomy? Thank you so much.
@thethuyain11 жыл бұрын
Would you mind telling me where you got the cable that you use for low level right and left input connection.
@alwaysforwardyt11 жыл бұрын
Another silly question... Would you mind to tell me if there is any possibility to connect the subwoofer of the Logitech z906 system to a receiver (Yamaha RX-V373)?. Thanks a lot in advance!!
@JustinCopeland-ks1xb7 жыл бұрын
Can you do all 3 of them??
@lavaorganizasyon3 жыл бұрын
Thank you,really clear expression
@Thecamp1234510 жыл бұрын
Thank you but I didn't understand what you wrote, were can I buy a amplifier, then how do I set it up.
@KigwaOfficial5 жыл бұрын
I have a question sir,i hope you help me..i have db 502-12 amplifier 1500 watts and 550x2 speakers,and i want to install an subwoofer..how many watts of subwoofer can set up to my amplier..i hope you help me sir
@John-es4yf8 ай бұрын
Thanks for make it simple!
@dargonzilla12 жыл бұрын
I don't quite understand.. Would it work if I would just connect the woofer with the left/right channel on my reciever, or can it damage the woofer?
@albertvasquez62075 жыл бұрын
Straight to the point daaaaaaam. 👍
@ayanmondal48775 жыл бұрын
Can you please tell me what should i do to run 400 wat sub woofer in 80 watt woofer kit. I neet it. Please help..
@musikdoktor12 жыл бұрын
Hola Juan, te podria decir que depende de tu sistema.. yo personalemnte prefiero por linea ya que tienes control del crossover y puedes elejir que frequencias cortar.. con esto me refiero a que puedes situar la frequencia que mejor calce a tu sistema ya que puedes tener parlantes frontales que tengan ya woofers o torres que no.. LFE deberias poder controlarlas tambien desde tu amplificador si es uno descente.. en mi NAD si se puede.. Saludos desde URUGUAY
@esa22367 жыл бұрын
Do I plug a digital coax into the LFE ports???
@brewsburgers3354 Жыл бұрын
I have a two channel receiver with A and B speaker selection. Currently I have two floor tower speakers on the A channel and I just ordered two matching subs. Does anyone have recommendations on how to connect the two subs? Should I run 1 tower and 1 sub on A channel and the other pair on B channel or should I run 2 towers on A and 2 subs on B?
@RENT7778 жыл бұрын
not sure if any of you could answer this but is it possible to connect a subwoofer from a shelf system to a receiver somehow? Receiver has sub out just not sure how to connect since the cable is different. Maybe it's not possible.
@davidclifton51862 жыл бұрын
Could I use the line out with one receiver and rca wire to another
@jordyminten349110 жыл бұрын
Does the high level input effect the sound quality of the speakers?
@floridagirl3864 жыл бұрын
Yup
@Tim4Games10 жыл бұрын
I have a bit of a problem, my reciever has a output like the first one you discribed. The problem is: my sub has a cable input, like the last one you discribed. Any advise?
@ToploadedGaming5 жыл бұрын
What happens if you only have on jack on the woofer and two on the receiver?
@jeffsawdon51687 жыл бұрын
I've added a turntable into the mix via phono box into analogue inputs. Sub doesn't get the low level signal, any solution? All digital sources are fine. Only has one pair of inputs and speaker terminals on Wharfedale sub. Thanks.
@mrp3ero7 жыл бұрын
I had the same problem. Check your speaker settings and select "small speakers" that worked for me.
@tritttyl00012 жыл бұрын
dose your phase control matter if its a 7.2 AV receiver? they are two separate channels?
@monkamonka28635 жыл бұрын
i have a single coil sub woofer (2 wires). Can I hook it up to right and left somehow to make it louder?
@tougie902 ай бұрын
Did it wirk
@MrWolfgang24 жыл бұрын
If you connect to the speaker cables. Does that mean that there will be 2 sets of wires for left and right. So u will connect 2 wires into the stereo left hole.... 1 set goes to the sub left and 1 set goes to the left speaker. Then the same for the right? I don't have 4 speakers outputs from the stereo you see....?
@Thecamp1234510 жыл бұрын
hey there, i have a question my uncle gave me a vanderbach hrs-805 home theater. the subwoofer is the receiver, everything pugs in there. it doesn't have any bass it sounds loud but no bass why? i just pluged it with a aux calble. Also on the back it has a 5.1ch input colored holes which are like for the speakers, it has 2000 watts it suppose to have bass but it doesn't can you help me solve my problem?
@EIectroHouze12 жыл бұрын
hi alright so im trying to do that also. i have a sub with the pos and neg on each side x2. i also have a separate speaker that has a pos and neg port. i have a cord with a pos, neg, green, and white all in one cord. how do i connect the speakers to it? or is this what you are saying not to do? i dont know if i have to have a pos and neg going to the speaker and then back to the sub with Another cord. ? please reply thx. if you dont understand my question its all good. thx though :)
@ianbennett59974 жыл бұрын
So my amp has a sub channel with only two outputs a positive and a negative, how do I connect this to the subwoofer, and it’s speaker wire not rca or lfe.
@Gioxtream4 жыл бұрын
Can I Bi-amp the subwoofer???? I would like to use two subwoofers with my bookshelves speakers. One sub-woofer for each channel. Can I do it safely ?
@vadimkrylov7 жыл бұрын
Which type is the best? What if I also have a stereo amplifier for music and for movies I'm using it as an power amplifier to my front speakers?
@terrywaller32366 жыл бұрын
good idea
@krane153 жыл бұрын
Like asking what car is best. It would depend on why you need it, and how you're going to use it.
@jonnietruth40836 жыл бұрын
PERFECTLY EXPLAINED ..THANKS
@nator9987 жыл бұрын
can I use the low level input and output to hi level output
@INDIlob9 жыл бұрын
Help! If i buy bic america f12 sub And bookshelf speakers how would i connect them
@johnchancellor69459 жыл бұрын
The bookshelf speakers would be through speaker wire and the subwoofer would probably be through a single RCA also known as a coaxial cable (lfe)
@LAREXJR6 жыл бұрын
I have a question....i recently purchased a tube preamp with 2 audio outputs. one output will be dedicated to a tube amp with a pair of 3 way speakers.The other audio output i want to use to run another tube amp to run 1 subwoofer...i do not want to use the subwoofers integrated amp because using them would defeat the purpose of the tube amp and it's sweet sound compared to ss. I have been looking for passive subwoofers but mostly all are powered. Now my question is.....can i run my tube amp to the speaker inputs of the subwoofer without using the integrated amp of the subwoofer????or would i still have to power the subwoofer using it's integrated amp???
@bujjibabukotra55385 жыл бұрын
my home theatre sound no clarity
@MarkSWilliams2711 жыл бұрын
Dumb question here...In a simple two channel set up, with a conventional two channel amp and preamp....how do I hook up the satellite speakers? Do the speaker cables attach to those binding posts on the back of the subwoofer plate amp, then run to the satellites? Thanks, M.
@Junem19753 жыл бұрын
wow! Thanks to your informative video!
@eirikjensen770610 жыл бұрын
Where do you put your high level input cables on the reciever ? In the front (Left or right ) Center output, or the surround inputs ? I can`t find a subwoofer input fitting those cablers. Only RCA, but my sub doesnt support that.
@trix2019 жыл бұрын
front left and right chanel
@xcessdj11 жыл бұрын
Nice video , and answered my doughts
@heatmanable10 жыл бұрын
good info , appreciated .tks
@TheTlevasseur10196 жыл бұрын
Say I have to table top speakers is subwoofer and a amplifier how would I hook all is up together
@sandrosmaximus21213 жыл бұрын
Very nice Video, Thanks!
@helderdemouramartins5689 Жыл бұрын
I understood that you double connect from the OLD stereo amp 1- to the usual left/right speakers and a 2-new connection on the same amp output into the "high-level input" from the Subwoofer, right? (This question is repeated NNN times in here without a clear question and an answer), cables should be same size i guess. Since your subwoofer does not have "high level out" i guess it is the only way, Right?
@andrewmaple98635 жыл бұрын
Can I connect my sub straight to my TV? Think my sub have a build in app.
@vikasjsheth3 жыл бұрын
If I put both the speaker wires into the subwoofer, then how do I reconnect them to the speakers through the subwoofer?
@danielmiller82388 жыл бұрын
can anyone help I'm clueless when it comes the these things. my subwoofer had an l & r input which I have connected to my TV. but still can't figure out how to get it fired up tried going through tv settings and can't find nothing
@georgesmith30227 жыл бұрын
where r u going to connect the speakers if the sub has only in high level inputs?
@johnyang71264 жыл бұрын
The subwoofer needs a source, so you can simply run wires from another speaker which is close to the subwoofers location, or run wire from the receiver directly to the subwoofer.
@joerosewicz506810 жыл бұрын
I have a Onkyo receiver that only has one subwoofer output that is strictly a bare wire connection (uses a small clamp where the bare wire is inserted for negative and positive). My subwoofer only has this type of connection for the "high level" with two channels and uses an rca type connection for the other one channel. How do I go about connecting this? Should I strip one side of a rca cable in order to connect it to my receiver?
@MrApplewine6 жыл бұрын
What do you think about subwoofers without high level input/outputs for 2 channel systems? Are these bad sub woofer designs?