How to Install a Honeywell Digital Heat Pump Thermostat

Рет қаралды 52,301

5 жыл бұрын

How to install a heat pump thermostat properly and also what to do with your old Mercury thermostat.
It is very important to handle the old mercury thermostat with care and to properly dispose of it once you have removed from the wall.
Go to earth911.com to learn where to dispose of the old thermostat.
Klein 4in1 screwdriver amzn.to/2Lngdid
Perfect for thermostat installation.
Honeywell Heatpump Thermostat amzn.to/2YDIbx4
(Honeywell RTH3100C1002/E1 Digital Heat/Cool Pump Thermostat)
Pocket Level amzn.to/2YE8EXg
To get your hands some some really good Tools of the Trade follow this link for whats in my bag. www.amazon.com/shop/danjiles
DISCLAIMER
Some of the links above are affiliate links, where I earn a small commission if you click on the link and purchase an item. You are not obligated to do so, but it does help fund these videos in hopes of bringing value to you!

Пікірлер: 40

@user-mu9pv8ui9e 2 жыл бұрын

*Works great: **Fastly.Cool** and Warming environment perfectly controlled. I use 3 in different grow tents. It’s nice to see from your phone how your tent temps are. Does High and Low and records data.*

@millerakemi7539 Жыл бұрын

He is the best really worked and simple to the point

@luislau9338 3 жыл бұрын

Thank you sir for this easy friendly block instruction on replacing a thermostat. The thermostat I need and you are recommending is out of stock. What model of thermostat would you recommend me to use instead?

@VIDEOHEREBOB 4 жыл бұрын

Did you ever do a 2 stage heat pump that you could share? Thank you.

@YourFriendlyGApilot 10 ай бұрын

Great video thank you so much for the clear explanation!

@meganrenaeart Жыл бұрын

Hi, can you ever have a two stage heat pump without an O or B wire?

@stevebuchanan3212 11 ай бұрын

Hello, This t-stat has aux heat which my system also has but you did not address that in this video. Do you know which wires would be used to connect the aux strip heaters or how that would be done?

@joshuavanalst2365 Жыл бұрын

Have you ever had to hook the green to a yellow with a jumper wire when Running a WiFi thermostat. With a heat pump

@jeremyrainwater2175 10 ай бұрын

I pressed the two buttons together and messed with the settings. Can you please tell me how i get it set back to out of the box factory?

@imtruth69 6 ай бұрын

"Y" is for the compressor, whether in heat or cool mode. Not for cooling as stated at 7:40.

@lhlinn7351 2 жыл бұрын

Dan, thanks for posting the video. I have a basic heat pump and I want to change the old digital thermostat to a new programmable thermostat. The wiring is very straightforward, except the instructions say a jumper is needed between W2 and E if there is no OD T-Stat. My system doesn't have an OD T-Stat, but the old thermostat didn't have this jumper. Do I need to provide this jumper? Thank you for any assistance.

@mrfloodsparty 2 жыл бұрын

Hi, LH Linn, my thermostat is exactly the same. And most basic residential heat pumps don't come with OD stats stock, either. You don't need the emergency at all, unless you live in a crazy-cold environment. Auxiliary still works fine without E/AUX jumper. I don't have my E/AUX jumpered either and have had no problems for more than fifteen years.

@romeparrilla8307 Жыл бұрын

Good job my friend,but im still confuse on my thermostat,can you help me a little,all my wirings are total of 5 and its blue,white,red,green,yellow and my new non programmable thermostat is c,o,b,w/e,w2,rh,rc,g,y,y2.i really dont know where to hook them up and i dont know how to read the instruction.thank you very much

@chuckgrc3011 2 жыл бұрын

Nice vid, does that model have the ability to set maximum and minimum temps so no one cn tamper?

@danjiles 2 жыл бұрын

Sorry, not a programmable one

@jeremyrainwater2175 10 ай бұрын

How do I reset my thermostat like this one????

@glennturner6672 3 жыл бұрын

Hey Dan I have the same old thermostat in my home. Wires on back are connected as follows, blue to x, white to w2, brown to e, yellow y, orange o, red r, green g. Do I wire new thermostat like yours as you explained.

@danjiles 3 жыл бұрын

That’s hard for me to answer as not all systems use the common wire in the same way. Some system use a light wire that uses the blue and some use common wire with brown.

@eltoncarpenter3102 2 жыл бұрын

I do not have brown wire. I do have blue. Should I put blue to "B" or blue wire to "C"?

@anonymoususername1091 5 ай бұрын

This guy looks like if Tommy Lee Jones did hvac

@networth8754 2 жыл бұрын

Dan, If I have a common wire and I install a new Honeywell Pro 3000, will it run normally without batteries?

@danjiles 2 жыл бұрын

Yes, the batteries only keep the last setting if the power get shut off to the system.

@networth8754 2 жыл бұрын

@@danjiles Thanks Dan for sharing your knowledge.

@ApartmentMaintenance 5 жыл бұрын

What editing program do you use Dan ?

@danjiles 5 жыл бұрын

+Rich F filmora

@danjiles 5 жыл бұрын

+Rich F Filmora is my current editor.

@mobitechaz Жыл бұрын

Im stumped. Trying to install a smart tstat that requires a C wire. Ive got 29V from R to Y, G, O at my tstat. My R to C has 29v at the heat pump unit. I ran a blue wire from the C terminal at the heat pump unit down to the tstat. The other end of the same blue wire that reads 29v at the heat pump only reads 16 to 17v at the tstat end of the wire. WTF? What would cause the wire to lose 10 Volts? Its no longer than 7 feet of length (at least that's the physical distance from the tstat to the bryant heat pump unit on the roof. The connection to the C term is solid. There is continuity. Somehow, as that blue wire is snaking through the drywall down to the tstat it is losing 10 volts. I can't explain that. I tried a different wire, and same result. 17 volts. Makes no sense.

@robertedgemont 5 жыл бұрын

This doesn’t need a jumper on the red ?

@danjiles 5 жыл бұрын

+robertedgemont not this one.

@awatchman5945 4 жыл бұрын

My "L" is hooked up. What is it? It has the blue on it which is a reversing valve for heat. WHAT IS L ? My orange is the reversing valve for cool which is OB on my tstat. Im using 7 of the 8 wires for just a standard heat pump. No indoor unit. Please..... what is L ?

@williamclay5566 4 жыл бұрын

A Watchman I have a blue Wire where do I put that

@williamclay5566 4 жыл бұрын

That we’re u put the black wire

@joshuavanalst2365 Жыл бұрын

L. Or L/a. Input for heat pump fault.

@romeparrilla8307 Жыл бұрын

im really sorry,that was a programmable thermostat,,the new non programmable that i need help to hook up is c,o,b,w/e,w2,r,g,y with the same color wirings thank you very much again.....

@romeparrilla8307 Жыл бұрын

that is a heat pump ac,cheers......