Full Video • How to Install a Kitch... How to install a double kitchen sink drain assembly. Kitchen Sink drain installation including kitchen sink plumbing drain installation
Пікірлер: 72
@myoldplumber Жыл бұрын
Full Video including basket strainer install here kzfaq.info/get/bejne/epp1p71-0L_RY5s.html
@frederickneal478110 ай бұрын
It's all about gravity!!! GOOD JOB!
@alialiev72717 күн бұрын
Thanks man❤🎉
@FerociousSniper8 күн бұрын
Why is a T okay in this application and not a sweep?
@dorisannstevenson72226 ай бұрын
Hey I think he probably did an awesome job but how about slowing down next time for people who are trying to do this at home by themselves
@jacquelinewoodard4435Ай бұрын
Probably because there’s a full video as stated in the description. 😂😅
@MOUNTAINMANJJ6 күн бұрын
Why can't I use that thick black gasket on the TOP of the sink and avoid using the plumbers putty?
@MusicLoverBlogspot20132 ай бұрын
What's that glue You spread
@potatoemancerАй бұрын
black plastic pipe is ABS, so they should be using ABS cement (yellow)
@GregoryPauline23 күн бұрын
good job
@chechelee3206 күн бұрын
Hey bro y si se tapa dónde está el tubo de limpieza
@chechelee3206 күн бұрын
Llegó a muchos trabajos así y mover esas p-tras es un dolor de cabeza 🤯
@christopher28876 ай бұрын
Beautiful work but I have taken apart my sink drains and cleaned them out so many times that I will never, never glue sink drains. Only a person who has never cleaned out their pipes will glue them.
@tudvalstone3 ай бұрын
Shouldn't there be an opening at the bottom, so you just take the cap off to clean?
@Gerard1to2 ай бұрын
Lol come on man, you never glue drains?? That is comical.
@eccofuture2 ай бұрын
@@tudvalstone the p trap can be opened to allow for a snake
@warriorofgodfitness488Ай бұрын
There is a threaded fitting on the pee trap and at both drains.
@jake16542 Жыл бұрын
This is nails good job bud. The ptrap is fine it won’t leak if you dope the face, old heads think they leak idk why 😂. Anyone complaining that it’s glued fittings can literally take it all apart they’re stupid. Keep plumbing this way you’ll go far.
@myoldplumber Жыл бұрын
I appreciate the comment, thank you. 👍
@scottfletcher1956 Жыл бұрын
Looks good. Fyi all your fittings below the flood rim level need to be drainage fittings. That vent 90 should be a long turn where it turns back into the wall. Also I would suggest never using those p traps. Use all glue, those leak, often. Looks beautiful.
@myoldplumber Жыл бұрын
Thanks for the comment @scottlflecher1956
@f3arful Жыл бұрын
For kitchen sinks you have to use a serviceable p trap it cant be all glued. That's code in my area. He should also have a 3/4" cleanout plug at the bottom as well.
@usamaking302619 күн бұрын
❤
@davesaunders70802 ай бұрын
like a drain plug at bottom of trap
@MikeRatcliffe20142 ай бұрын
Should there be a slope between the right and the left so that the water from the right sink runs to the left? If so, is there a specific degree this has to be at , or it doesn't matter?
@adamdover38682 ай бұрын
just give it a little bit a fall of but not to much , he gave it fall from right to left because it’s draining on the left side
@emeerre23903 ай бұрын
How do both ends stay up on the pipe? Having the issue where one side falls off and water drips from one side.
@redbaren672 ай бұрын
You need the tapered polyethylene washer on each slipped over pipe with the flat side toward the nut and tapered side towards the threads. The rest he does he uses standard PVC that needs glued but most kits will have these fittings where you cut to length for your setup and use the polyethylene washers to tighten each connection since it's slipped into and not glued.
@brendenbaker83972 жыл бұрын
No wye to tie in the dishwasher?
@myoldplumber Жыл бұрын
The kitchen that this sink was installed in has no room for a dishwasher nor will it ever without an addition being added to the kitchen. Thanks for the comment 👍
@thankthelord26067 ай бұрын
It falls right down, it won't tighten
@ronid38223 ай бұрын
What glue are you using? This video is for beginners right?
@lurkingShadows3 ай бұрын
Definitely a waterproof adhesive. Might be plummers glue.
@BE-bs8oe29 күн бұрын
Tx for NOT showing whqt u do. E.g. the green thing you invisibly do shg with in a pipe.
@papichulo54654 ай бұрын
I cross threaded my plastic pipe, it’s stuck now and idea how to losen it?
@janicebrown65623 ай бұрын
A pipe wrench and good old fashioned muscles 💪🏾
@marvthecarpenter Жыл бұрын
Good idea to make it an all glue situation, that way if they ever have any issues they have to call you back out. Nice job security.
@myoldplumber Жыл бұрын
Thanks for the comment @marvthecarpenter, the kitchen sink drain is designed so the entire assembly can come apart Incase of any emergency, you can see an example of the same drain here kzfaq.infoC9TycrAro0w?feature=share Thanks again for the comment
@Mixwell19838 ай бұрын
You can take the whole glued up part off from the 2 tailpieces and P trap by unscrewing the plastic nuts.....
@GuitarAX7Tutor8 ай бұрын
Now there is no way to snake it , will fail inspection
@GarryMacNeill-zo6pk18 күн бұрын
He’s going way to fast and doesn’t show how to measure pipe fittings
@pierro91bis Жыл бұрын
Hello, how can you install it if you don't have a T at the end ?
@samuelnedelec39553 ай бұрын
Boujour existe t-il les robinet de cuisine et salle de bain et extérieur de la maison 🏠 connecté avec téléphone portable pour pouvoir fermer ou ouvrir l'eau ? Merci ++
@michaelboehme98895 ай бұрын
If you are going to make instructional videos, like this title suggests, slow down and explain. People have so many questions and your response is, "it's there you just cant see it."
@myoldplumber6 ай бұрын
I posted this video a while ago, just rewatching, anyone else catch those ashy elbows!!!
@Frank-hg9rl6 ай бұрын
The problem i see is the drain position on the wall itself! Isn't it to high? The drain will always be full of water? At least from the trap to the wall? No?
@CodyCha3 ай бұрын
That’s why it’s called p-trap. There’s always water trapped in the pipe which prevent sewer gases from coming back up to the sink.
@Gerard1to2 ай бұрын
I think that pipe might be a vent.. it's hard to tell because he doesn't show where the actual trap goes into
@user-ly1ie7jf6c2 ай бұрын
Hello everyone, I am a manufacturer of kitchen sinks. Our factory is in Guangdong, China. If you need a sink, please contact me.
@H1000J Жыл бұрын
My drains didnt come with the downward pipe n idk what to dooo
@BriannaWeldon Жыл бұрын
Do you mean the P Trap? The one that curves? You could buy one.
@H1000J Жыл бұрын
@@BriannaWeldon figured it out haha
@raybin68732 жыл бұрын
Why ABS pipe? Code requirement?
@craftman5632 Жыл бұрын
Nobody answered you yet! It's required in Mobile, and manufactured homes.
@myoldplumber Жыл бұрын
This video is made in Canada, we don't use PVC in residential plumbing. I'm all for PVC however the pipe and fittings are not available. We use Sys 15 and XFR however it's only in commercial and priced high. Thanks for the comment
@jake16542 Жыл бұрын
A handyman runs that in tubular, a plumber does it like this big difference
@myoldplumber Жыл бұрын
Thank you for the comment
@lailaazeem7982 Жыл бұрын
My kitchen sink is clogged I tried everything drano etc but nothing happen. Is there anyone have any idea?
@craftman5632 Жыл бұрын
You need to take off that p-trap, it's that U-shaped piece at the bottom, unscrew both sides and drop it out make sure you have a bucket to catch the water that's in the p-trap, then clean out the clogged and reassemble. If your is all glued-on like his in the video you are going to need a wire coat hanger and fish it down the drain to loosen up the clogged then put Drano in there and wait 20 minutes before turning on the faucet, if that doesn't work, have water in your sink and use your toilet plunger. Try these things first before calling a plumber.
@j.me.0311 Жыл бұрын
Take a plunger to it.
@MisterTwister889 ай бұрын
@@craftman5632Please don’t recommend drain cleaner before calling a plumber. How would you like to work on a drain filled with that? Drain cleaner is also detrimental to a snake cable.
@theodorepetine7562 Жыл бұрын
I double trapped all my twin fixture sinks when possible can’t stand continuous waste too many chances of leaks
@larryallen94048 ай бұрын
That's wrong. CODE says ONE trap per trap arm.
@michaeldudas7584 Жыл бұрын
How about a cleanout, Mr. I Know what I'm doing!
@myoldplumber Жыл бұрын
There is an inline clean out after the trap. Thanks for the comment
@michaeldudas7584 Жыл бұрын
@@myoldplumber Sorry. Couldn't see it.
@CarlosGonzalez-ix4iw2 жыл бұрын
All glue no tie if you drop something you never getting out
@myoldplumber Жыл бұрын
The drain is designed to be disassembled easily. Watch this example on the same drain kzfaq.info/get/bejne/b66KiZqczbLeemw.html Thanks for the comment
@casey87832 жыл бұрын
Guess they didn't want a garbage disposal either? Why would you not run the drain in PVC also? ABS just looks tacky
@Gixxr11 Жыл бұрын
I think abs looks better. I never use it around here
@myoldplumber Жыл бұрын
We don't use PVC in residential plumbing in Canada. Not my decision, it's just not available. We use Sys 15 and XFR in commercial, however residential is ABS. Thanks for the comment
@jezamoonspell2216 ай бұрын
That's what I was looking at lol... I've seen some videos and I see people not installing garbage disposals to their kitchen sinks??? So are they just using some Dinosaur to eat the little scraps that might fall into the sink lol 😆 😅