@robmac3287 Жыл бұрын
Excellent video, thank you for putting in the effort to make it, I need to make a custom security door/shutter 50"X30" to fit in front of a ground-level casement window for egress only and this helped a lot in working out how to do it. I live in North America, otherwise, I would hire you to do it.
@APBourneBespoke Жыл бұрын
Thanks, glad the video helped you out. Adey
@simonsparks6959 8 ай бұрын
I would like to see a video on how to fit a multi-point lock to a master and a slave double front wooden door.
@APBourneBespoke 4 жыл бұрын
Just a quick note that this video has been edited a few times since its original posting. In the original video I’ve commented on the handle holes and handle fitting not being done as this door was for a customer and the handle had not been chosen. Hence why this was not done. This has now been removed but if anyone needs any advice on the aforementioned, please just message and I will gladly oblige.
@DavidJLevi 10 ай бұрын
Helpful video, thanks. What make and model lock did you use?
@APBourneBespoke 10 ай бұрын
Hi This is a link to the lock I used. www.ironmongerydirect.co.uk/product/era-5-point-multipoint-door-lock-2-hook-35mm-backset-92mm-cc-514043 Adey
@michaeljones6561 2 жыл бұрын
You used a 16mm for the faceplate on the first shallow cut. What size did you use for the second deeper cut (where the mechanism slides up and down)?
@APBourneBespoke 2 жыл бұрын
Hi Michael I’m pretty sure I used a straight fluted 12mm cutter.
@calvinvandergaast3021 3 жыл бұрын
Do you bevel the edge of the door for clearance?
@APBourneBespoke 3 жыл бұрын
Hi Calvin I don’t bevel the edge of the door if I’m fitting a multipoint lock, as it may twist the face of the lock and cause problems with the operation. So long as you have a decent margin/gap around the the door you shouldn’t have any problems.
@calvinvandergaast3021 3 жыл бұрын
@@APBourneBespoke thanks!
@laurenreid9336 3 жыл бұрын
How much roughly would something like this cost?
@APBourneBespoke 3 жыл бұрын
Hi Lauren Here is a link to the exact one I used in the video. www.ironmongerydirect.co.uk/product/era-5-point-timber-and-upvc-door-lock-514043?vat=1&shopping=true&infinity=ict2~net~gaw~ar~387176555199~kw~~mt~~cmp~Smart%20Shopping%20%3E%20Top%20Products~ag~Ad%20group&gclid=Cj0KCQiAhs79BRD0ARIsAC6XpaW1peQWZJDkjKrNSRB2zEdufzIj__FucqrDqT1HtTI5-BF1AL9HXeAaArVQEALw_wcB I hope this helps Adrian
@laurenreid9336 3 жыл бұрын
@@APBourneBespoke thank you! Is it an expensive job to pay someone to fit a lock like this?
@APBourneBespoke 3 жыл бұрын
Shouldn’t be to expensive. A good carpenter will get one of these fitted in a day. Depends where you are as to the cost of a local carpenter. Anywhere between £100-£200 approximately.
@laurenreid9336 3 жыл бұрын
@@APBourneBespoke thank you for your help:)
@APBourneBespoke 3 жыл бұрын
You’re welcome.
Weather Tight Corporation
Рет қаралды 65 М.