How to install a Ryzen CPU and its Wraith Stealth Cooler | AM4 socket

How to install a Ryzen CPU and its Wraith Stealth Cooler | AM4 socket | AMD

Рет қаралды 237,658

3 жыл бұрын

We all had to start somewhere. For you folks who are getting ready and are researching on how to build your first gaming pc then this video is for you. How to install a Ryzen CPU and its Wraith Stealth Cooler.
-----------------------------------------------------------------
Scotts PC Amazon store front - amzn.to/43TFq9R
-----------------------------------------------------------------
**AMAZON AFFILITATE LINKS**
Ryzen 5 5600x - amzn.to/3wDyAox
Ryzen 7 5800x - amzn.to/3n5aC2o
Ryzen 9 5900x - amzn.to/3DjeiDa
Ryzen 9 5950x - amzn.to/31S5tCK
-----------------------------------------------------------------
My Apple Airpods Pro - amzn.to/3Aq9v2u
-----------------------------------------------------------------
Computer fans - 3 tips on how to determine airflow direction - intake vs exhaust - • Computer fans - 3 tips...
------------------------------------------------------------------
I didn't become MONETIZED without a little help! Here's a link to TubeBuddy free Software extension for KZfaq that will help you with your KZfaq channel tags and titles to help get more views! MUST HAVE for any KZfaqr trying to grow their channel. Tubebuddy has helped my channel get more than ONE MILLION VIEWS - www.tubebuddy.com/scottspc
----------------------------------------------------------------
Equipment I use (Amazon Affiliate Links)
Canon M50 - amzn.to/2Ksj5fK
Samsung USB-C to 3.5mm Headphone Jack Adapter - amzn.to/3pgLzHY
Neewer Ring Light Kit:18"/48cm - amzn.to/34Hs9UA
Samsung Electronics Galaxy Note 20 Ultra 5G - amzn.to/3ruVFa8
GoPro HERO8 Black - amzn.to/34M3TAR
Professional Grade Lavalier Lapel Microphone - amzn.to/3pmm9Zs
----------------------------------------------------------------------------
I use Amazon affiliate links I use to support this channel. If you click on them and buy something, I will earn a small commission. They do not cost you anything extra.

Пікірлер: 305

@ScottsPC Жыл бұрын

I just installed the Ryzen 5950x. It's a Beast! CPU prices are dropping on the AM4 platform - amzn.to/3LQ6XRg

@beingofnatureshadow 3 жыл бұрын

bless you most people skip over this and I was starting to worry that I was missing some baackplate screws- I just had to press a little harder so the screws would catch! thank ya!

@ScottsPC 3 жыл бұрын

Glad to hear the video helped some! Thanks for this comment and the sub! ⚡️ Good luck to you my friend! ⚡️

@dopeshi.7910 2 жыл бұрын

thanks man had the same problem i was worried for a second

@quakker2110 Жыл бұрын

Same

@gnt.no_1 11 ай бұрын

welp im still stuck with the screws, im apllying pressure on them like crazy, they wont mo e a bit

@JamBread-ep7wr 9 ай бұрын

@@gnt.no_1I'm having the same issue, no idea on what to do

@omarashraf9056 2 жыл бұрын

Very important note when installing the stock cpu fan: there is only one way to install it which is by applying pressure on the back plate of the mother board ( black metal plate found behind the motherboard) then start screwing and applying pressure starting from top right corner then bottom left and so on. Do not screw one screw at once try equally distribute it. thank me later 😉

@viroxin1260 2 жыл бұрын

Holy shit thank you so much. I was going crazy from not knowing why the screws wouldn't go in

@arksurvivaldevolved1382 Жыл бұрын

I love you

@luneri9168 Жыл бұрын

You're the best dude lmao, I was wondering why only one side was not being able to be tightened

@sheenfromtf2 Жыл бұрын

Thank you so much dude. This stumped me and my brother until we looked in the coments and saw yours. Real life saver thank you

@Philmore. Жыл бұрын

@@viroxin1260 they have to sorta reach out to the holes

@ShortStoriesbyMatt 2 жыл бұрын

One of the most straightforward and informative installs. Thank you for the simplicity and explanation in terms we all can get. Bravo!

@garchomp3136 Жыл бұрын

Absolutely brilliant from you. I was struggling to engage all the screws for my cooler. You saying to engage a couple of threads in each screw before fully tightening everything was a life saver. Thank you.

@Waffellover8656 Жыл бұрын

This was a nightmare to install

@Kindhamster 2 жыл бұрын

I am gobsmacked that you only have 2000 subscribers. This video is clear, informative, and you're a very friendly and welcoming host. Thank you for this! You just earned another subscriber.

@ScottsPC 2 жыл бұрын

Thanks for the kind words and thanks for the sub! ⚡️ Good luck to you! ⚡️

@bocconom 3 ай бұрын

I love how straight forward you are and right to the point. Now it has been years since I built a system and this was a great refresher. Nice job.

@justonkehr9050 2 жыл бұрын

thank you so much! I was worried pressing down on the screws would be bad but this totally helped and it made me feel a bit better about my first build!

@matthewcoleman1282 3 жыл бұрын

Helpful vid mate. Cheers from an Aussie fan.

@Joseph32547 2 жыл бұрын

I never installed the screw type fan before and wanted to make sure i was going to do it right. Thanks for the vid that went straight to the point and was well done.

@ScottsPC 2 жыл бұрын

Much appreciated and thanks for watching! ⚡️

@Ricky-ce3jo 2 жыл бұрын

Subscribed my friend, my first PC build is in the works and you are the best I've found who explains the fine details

@ScottsPC 2 жыл бұрын

Thanks for watching and thanks for the sub! ⚡️ Much appreciated! ⚡️

@kaframanaricheta1401 2 жыл бұрын

Thank you! I was getting CPU fan error, then I watched this video and learned a few things!

@ScottsPC 2 жыл бұрын

Glad the video helped! ⚡️

@A4Paper 3 жыл бұрын

Great video, will definitely refer to this later on, after reading comments I feel very lucky to have access to the backplate through my case back panel

@ScottsPC 3 жыл бұрын

Exactly! Easy access to the back plate saves a ton of time and hassle.

@desktorp Жыл бұрын

old timer here.. probably building my 13th or 14th computer, but it's been a long time and haven't dealt with am4 at all, so this helped to confirm my assumption that the brackets needed to come off. good, straightforward, helpful video. thanks!

@OldSnake001 Жыл бұрын

What a great video!!! Really helped with my wife's new build as it didn't have the latch CPU fan like the Ryzen 9 3900X, and the instructions on the MOBO manual didn't have instructions.

@thekidsish8368 3 жыл бұрын

Great upload mate! Sending support from Australia 🇭🇲

@ScottsPC 3 жыл бұрын

Much appreciated! ⚡️ Thanks for the support! ⚡️

@jjith2005 Жыл бұрын

This helped me so much, thank you!

@lexidecimal9941 2 жыл бұрын

Thanks for this. Super simple fast and helpful. Really wanted to hear about how tight to make the screws... noted can't overnighten. 👊😓👍

@ScottsPC 2 жыл бұрын

Thanks and good luck to you!

@windowswhistler229 3 жыл бұрын

I subbed because this video got straight into the topic without a single second of intro, and was very helpful and detailed. Thank you very much for this video.

@ScottsPC 3 жыл бұрын

Thanks! ⚡️ LOL... I hate long intros and fluff myself. Thanks for the sub and thanks for watching! ⚡️

@98Niicko89 3 жыл бұрын

Im building my first pc ever and im really excited, thanks for the tutorial, it helped a lot!

@ScottsPC 3 жыл бұрын

Good luck to you! ⚡️

@Death_Metal_Head Жыл бұрын

I couldn’t figure out why the wraith wasn’t screwing in and I hadn’t realized the back plate came off! Lol. Thanks!!

@Michael-of9ce 2 жыл бұрын

Well explained. Thank you.

@Penguinnoly Жыл бұрын

great video, no filler

@randomjapaneseword 2 жыл бұрын

Thank you for everything and thank you for encouraging me. My hands are shaking little much than yours due to my Neurological disease and I was planning to call my friend to get my cpu installed but now, I think I can do that myself.

@ScottsPC 2 жыл бұрын

Awesome! ⚡️ Have fun with your computer! ⚡️

@masonbuckles4805 2 жыл бұрын

thank you so much, exactly what i was trying to find

@ScottsPC 2 жыл бұрын

Thanks for watching and good luck to you! ⚡️

@latibro21 2 жыл бұрын

Thanks for this. I'm currently waiting for my new pc parts and will try to assemble a unit for the first time.

@ScottsPC 2 жыл бұрын

Thanks for watching and good luck to you! ⚡️

@PSPlaysBest Жыл бұрын

Thank you for the help! Great channel!

@ngwoo 2 жыл бұрын

The last time I built a PC it was with a third-generation Intel i5 CPU. Those stock coolers were absolutely garbage - crappy plastic pushpins that basically disintegrate themselves if you ever need to take the cooler off. These Ryzen coolers are a godsend compared to those, and I love that a backplate is standard hardware instead of something reserved for aftermarket coolers. Good stuff, and great guide.

@ScottsPC 2 жыл бұрын

Thanks for watching and thanks for the comment!

@hugok9211 2 жыл бұрын

I was right in the moment and realize the videos I watch didn't show wraith cooler damn, you saved me!

@ScottsPC 2 жыл бұрын

Glad the video was able to help. Good luck to you!

@elastichedgehog6339 4 ай бұрын

Exceptional video. Straight to the point.

@ScottsPC 4 ай бұрын

Thanks for watching my friend and good luck to you! ⚡️

@eddiesurfah5525 2 жыл бұрын

Legend. Thanks

@Jarthalamew 3 жыл бұрын

Thanks man, I just installed my stock cooler and was worried I did it wrong.

@iRedFox 7 ай бұрын

What a kind man

@hankpns Жыл бұрын

Thanks worked perfectly

@challkske Жыл бұрын

Thanks very helpful👍

@tsasar1534 Жыл бұрын

I’m so mad I didint see this video earlier I got this cpu and was gonna wait until Tmr to get thermal paste from the store because I didn’t know it comes with thermal paste already on it when it’s new thank you for the video😂

@Deadscout9 8 ай бұрын

Thanks!

@ednallanos9331 3 жыл бұрын

I’ve seen this process so many times for how many pc build I’ve seen and my coolers wasn’t going in until I noticed my motherboard backplate actually fell in the back of my case I was so worried but I just put it back in place and easy sailing from there

@ScottsPC 3 жыл бұрын

Live and Learn!!! Thanks for sharing!😎😂😂😎

@ednallanos9331 3 жыл бұрын

Couldn’t agree more

@brucegibson1813 Жыл бұрын

Thank you . . . And Go Giants!

@WorstUsernameInDaWeb 3 жыл бұрын

Thx mate, i was going to spend extra 30bucks for a new fan. You save me

@sageofthetiger4166 3 жыл бұрын

Lol the backplate fell off on mine and didn't figure it out until I saw this video thx so much

@mattikemppinen6750 2 жыл бұрын

thanks, was wondering about the brackets on the MB around the cpu slot, figured they had to be for some other kind of cooler but had to make sure from a video :D

@ScottsPC 2 жыл бұрын

Thanks for watching! ⚡️

@ErickBRSAO 3 жыл бұрын

thx homie

@traveling8799 3 жыл бұрын

Very beautiful presentation my friend, very great job well done 👍 Have good day and see you around 👍

@ScottsPC 3 жыл бұрын

Thank you! You too!

@YoungOne777 3 жыл бұрын

Great video, thanks! God bless 💪🤝

@ScottsPC 3 жыл бұрын

Thanks, you too!

@indigo6920 3 жыл бұрын

I’m building my first pc while typing this. I hope it helps!

@ScottsPC 3 жыл бұрын

Good luck to you! ⚡️

@Mooooorty 3 жыл бұрын

Same and installing this fan is a pain I feel like I’m gonna break something it’s so annoying

@TwoForOneGaming 2 жыл бұрын

Thanks for the Video. I really had problems getting the screws in, it just did not wanna connect with the backplate. It felt so wrong using that much force.

@ScottsPC 2 жыл бұрын

First time is always the scariest. Feel like you're gonna break the motherboard...LOL. Thanks for watching!

@SWIRFTV 3 жыл бұрын

you forgot to add in the title "because the real cooler hasn't arrived in the mail yet"

@ScottsPC 3 жыл бұрын

Hahahaha....you know it!!!!

@frehesh.4386 3 жыл бұрын

Bruh wraith coolers arent that bad

@user-wj3eq7dz7u 3 жыл бұрын

@@frehesh.4386 Wraith stealth real shit.

@frehesh.4386 3 жыл бұрын

@@user-wj3eq7dz7u no they are not loud and they get the job done and dont look bad. For a stock cooler its good but not ideal

@user-wj3eq7dz7u 3 жыл бұрын

@@frehesh.4386 Bruv I literally bought R5 3600 yesterday with a stock cooler and my temps hitting 91°c on 100% usage and 50-51 on idle.

@lolsz1 2 жыл бұрын

building my own pc. the goddamn manual didnt help, this video did thanks!

@nebula6409 2 жыл бұрын

Thank you so much, I thought I was missing something when I couldn't put it on but just turned out the back plate fell 😂

@ScottsPC 2 жыл бұрын

You're welcome!! It's always the back plate....good luck to you!

@boomerreflex Жыл бұрын

Thanks

@tgalati56 2 жыл бұрын

THANK YOU!!!

@ScottsPC 2 жыл бұрын

You're welcome! Thanks for watching!!!!

@alynx424 Жыл бұрын

Your videos are simple and entertaining which I really like. I have one question though why do you have only amd cpus

@sodaholic4015 Жыл бұрын

Hi what do I do if I can't remove the two plastic clips? The screws are far too tight and don't budge, and I'm afraid of applying more pressure in case I damage the motherboard

@Joshua-ts5tb 2 жыл бұрын

Thanks man!

@ScottsPC 2 жыл бұрын

Thanks for watching! ⚡️

@Joshua-ts5tb 2 жыл бұрын

@@ScottsPC Quick question, does the stock cooler came with a thermal on it already?

@ScottsPC 2 жыл бұрын

@@Joshua-ts5tb if you bought brand new then yes. If used, you need to buy some thermal paste. Suggest you buy some thermal paste in case a mistake is made... Good luck to you! ⚡️

@Bennjammin 6 ай бұрын

Thanks I was wondering how it screwed in with no threads on the board. The wraith looks similar to the OEM Intel coolers in HP or Dells in the past.

@shadohhz01 Жыл бұрын

I'm in the middle of building my first pc and I'm very nervous about breaking anything haha. So this was very helpful as I wasn't applying enough pressure to get the screws to grab. Thank you very much

@ScottsPC Жыл бұрын

Good luck to you! ⚡️

@gordospeti Жыл бұрын

Thanx for the tutorial! You have helped me a lot, but there is one thing I am still confused about: what motherboard to choose? On the market there are motherboards on which Wraith Stealth can not be installed without blocking the nearest memory slot. The best would be to go for a micro ATX motherboard with 2 mem slots. Should I choose an ATX one instead? Thanx!

@Hymandois Жыл бұрын

Could the cpu possibly be damaged if I put too much pressure? I bought a ryzen and with it came this cooler but its nearly annoying to put the springlocked screws down

@sunofsotep8265 2 жыл бұрын

Great video; concise, informative. Thank you.

@ScottsPC 2 жыл бұрын

Glad it was helpful!

@DexDZNS 2 жыл бұрын

The screws don’t go in at all what am I suppose to do

@iconicik4120 2 жыл бұрын

well im taking out the gpu and the cpu with the cooler(of a 5600g prebuilt for 600) into a new one just mainly for the better airflow and looks too but it makes is possible for a high end gpu in the future for me, didn't see much videos on this part for it. and my parts are coming in Thursday the main one i was worried about was the mobo and being compatible with my cpu, luckily i found one that did say 5000 series compatible and has bios flashback so really i hope i don't brick it but thank you for showing this step

@gandalfthegray7733 3 жыл бұрын

I ran out of thermal paste, will taco bell fire sauce work? Great tutorial. Keep up the good work.

@ScottsPC 3 жыл бұрын

Just don't use toothpaste! ⚡️ hahahahahahaha! ⚡️ Thanks for the comment! ⚡️

@rays_433 2 жыл бұрын

Guys please help my screws of the fan won't install, it's in a perfect place the tip of it moves but the pointy tip won't move please help

@tazgma311 2 жыл бұрын

this was useful video . i have to replace my brother cpu fan for his computer

@ScottsPC 2 жыл бұрын

Thanks for watching and good luck to you my friend!

@SaadKidwai 2 жыл бұрын

Thank you

@ScottsPC 2 жыл бұрын

Thanks for watching! ⚡️

@PapurrPlays 2 жыл бұрын

New subscriber here! 😊🌟

@ScottsPC 2 жыл бұрын

Thanks for subbing! Thanks for watching and good luck to you!😎

@PapurrPlays 2 жыл бұрын

@@ScottsPC You're welcome, Sir! Thank you for making this video. I built my first ever PC yesterday and was checking if I screwed my cpu cooler the right way. 'Cause it has springs in it like the one you have in this video. I'm not sure if I tighten them right. But as I went on, the cooler seemed to be secured and in place. 😊

@PapurrPlays 2 жыл бұрын

@@ScottsPC I'm just worried that maybe the screws were loose or something. But they stopped moving at a certain point, so I guess they're okay?

@ScottsPC 2 жыл бұрын

@@PapurrPlays as long as the screws stopped you're good... Check your cpu temps to make sure all is "cool"

@YoungOne777 3 жыл бұрын

It's been a fat minute since I built my computer and I forgot about the back bracket 🤦 🤣 I was pissed because I couldn't find out how to make my cooler thread lol

@plasma8321 2 жыл бұрын

how do you know which direction you need to place the fan?

@chadthyimpaler9345 2 жыл бұрын

Does it matter which way I plug the fan in my mother board doesn’t have that plastic catch I guess that yours had

@joerobertson5627 Жыл бұрын

I have the cpu installed. Now the back plate is fully unattached from the mainboard. do we use this or does the 4 cooler pins/screws just snap in the backplate holes?

@curtis1552 2 жыл бұрын

I thought I could do this on my own without guides. But then I didn't realize the backplate disappeared and here we are😂

@ophbjason Жыл бұрын

So, I didn’t know about the backplate cuz I don’t have access to it, is that an important step to why my pc says no signal

@plasma8321 2 жыл бұрын

How do you hold the back plate in when the mobo is in the case?

@Digmen1 9 ай бұрын

Does it matter which way round the cooler is installed? And the cooler fan can it only plug in one way?

@areox4520 3 жыл бұрын

what did you do to hold in the backplate while you did it? just wondering whether i should get someone else to hold it in since mines in the case too

@ScottsPC 3 жыл бұрын

In this video I had the motherboard on top of the motherboard box so no issues. But yes, having a friend or family around always help when you need an extra set of hands when your in your tower. Good luck to you and thanks for the question!

@raelneverdie Жыл бұрын

Спасибо огромное! 😌

@hochhasd1 11 ай бұрын

It looked like you were applt thermal paste to the cpu when you already had it preapplied on the cooler.

@1stAid 2 жыл бұрын

Thank you for this video, I began installing the cooler (following the directions included in the CPU/cooler box) but that caused me to mess up due to the instructions not telling me that the backplate will fall off. I'm now trying to fix that problem....

@ScottsPC 2 жыл бұрын

Hope everything is good to go! Thanks for watching!

@1stAid 2 жыл бұрын

@@ScottsPC For a bit my PC wouldn't show as running on the screen (it was fine before the PC cooler change) so that worried me, but now it's running again. Although this weird thing happens where if I have all 4 RAM slots filled up, my PC won't show up on the monitor while it will show up on the monitor if just 2 of the RAM slots are filled.

@matteblack8707 2 жыл бұрын

@@1stAid hey mate i have heard that overtightening your cpu fan screws can cause problems like this

@garethhughes5745 2 жыл бұрын

Im removing my motherboard now to check the backplate. Must have fallen off as the screws wont reach the standoffs at all. The older way of attaching the old rgb wraith cooler was much better with the clips. This is so fiddly i got thermal paste everywhere now.

@magsmccusker5760 2 жыл бұрын

I dont know if my cooler is broke but I dont have any of four things on the corners I only have two 1 on the top and 1 on the bottom

@planetfabulous5833 2 жыл бұрын

Yummy beard!!!! I'm subscribing!

@justadude88 Ай бұрын

So what do I do if i am installing it in the case? Last time I had my brother help me but this time I have to do it alone.

@UnsignedHypeHOU Жыл бұрын

Thanks a lot this helped a bunch. Thought I had a simple motherboard and processor switch and found out the motherboard I got is too big for my case and ima have to pretty much build it out again.

@n1ckname534 2 жыл бұрын

Im having a trouble right now my cpu cooler doesnt go down it has springs

@oliverturan2243 Жыл бұрын

Loved the vid, super informative and easy to understand! I was wondering, does the alignment of the fan matter, or will it work the same regardless of the direction that the logo is pointing?

@ScottsPC Жыл бұрын

Yes it does

@ikeavaughan 2 жыл бұрын

I was about to rage out over previous videos ....but then i saw yours and you explained it properly God bless

@ScottsPC 2 жыл бұрын

Hahahaha....glad the video helped!!!!!😂😂😂

@titustech337 5 ай бұрын

Do you need the backplate for the default cooler?

@necocolein3332 Жыл бұрын

is there a plastic i need to remove on the thermal paste?

@worstalentscout 2 жыл бұрын

very nice and detailed video = so if the fan were to break down later on, do i just buy the replacement fan and screw the fan to the heatsink ?

@ScottsPC 2 жыл бұрын

If the fan failed, I would just get a whole new heatsink/fan... Good luck to you! ⚡️

@worstalentscout 2 жыл бұрын

@@ScottsPC ...i'm not a handyman kind of person and changing a CPU cooler will be a major challenge for me........especially when there's a chance that the CPU might stick to the heatsink and get pulled out of the socket ?

@ScottsPC 2 жыл бұрын

@@worstalentscout can be intimidating if you've never done it before... You just gave me a video idea... Basically after undoing the screws... Put firm pressure on the fan/heatsink and turn ever so gently until you feel the thermal paste breaking contact with the cpu..... Easier said than done.....

@worstalentscout 2 жыл бұрын

@@ScottsPC someone suggested using the pc intensively to get the CPU to soften the thermal paste 1st

@bengale7054 3 жыл бұрын

I have an issue. There are springs on my screws that don’t let them go down and they stay up so I can’t screw in my Amd stock cooler. I bought a 5 3500X

@perfectoryt9118 3 жыл бұрын

same issue

@mirphus7413 3 жыл бұрын

The cooler i just got with my cpu had springs on it as well and it looked like the screws wouldn't go down all you gotta do is just screw them a little once you got the cooler in place and it should stick it worked for me

@haisulisukka 3 жыл бұрын

I got this fixed by just pressing really hard

@SirJohnsonP 2 жыл бұрын

Not only that the springs would crack while screwing like something is cracking , I was afraid that something doesnt break

@mszastro 2 жыл бұрын

Can I install the amd cooler in a micro atx board or is the cooler too big

@werby453 2 жыл бұрын

Hi, I did the exact same thing but the RGB won't turn on what can I do to turn it on

@ScottsPC 3 жыл бұрын

Here's an updated version on how to install the hyper 212 black edition which includes the WIRE FAN CLIPS and the FAN SPLITTER to add a second fan - kzfaq.info/get/bejne/d7dlebmnyareYZc.html

@zez3208 2 ай бұрын

I heard the stock cooler has a really sticky thermal paste?

@LetGoMyLegosTyler 2 жыл бұрын

help my screws aren't going up or down on the heatsink

@AppleSauceYo Жыл бұрын

I cant see to screw the cooler screws in its hard ash

@garzins 2 жыл бұрын

Hello I have a question. If the cooler comes with pre applied thermal paste (like the stock cooler) does that still mean we have to find thermal paste from a store and apply it?

@ScottsPC 2 жыл бұрын

No.... But it's always a good idea to have some spare thermal paste if you make a mistake... Good luck to you! ⚡️

@garzins 2 жыл бұрын

@@ScottsPC Thanks! My final part comes in on the 16th so I’m excited but nervous at the same time 😅

@ScottsPC 2 жыл бұрын

@@garzins take your time and watch as many tutorials as possible... You got this!

@garzins 2 жыл бұрын

@@ScottsPC Thank you for the motivation on this :,) everyone else has been telling me it’ll be a waste of money but your the first person to encourage me

@dommevida_8721 Жыл бұрын

I somehow cannot get my old cooler of my cpu. The back plate already fell out but somehow the fan is not getting off and I cannot untie the screws anymore. Can somebody help?

@alexeddie2546 2 жыл бұрын

I know this a one year old video, but is it possible to install a Ryzen 5 3600 onto the b350m bazooka is it compatible or not if so do I have to do a BIOS update.

@ScottsPC 2 жыл бұрын

I would go to pcpartpicker.com and enter your build to see if compatible for a second opinion... I don't know off the top of my head.