How To Install a Solo Seat for a

Рет қаралды 13,824

2 жыл бұрын

Shop Harly Davidson Sportster seats on C.C. RIDER: www.ccriderseats.com/collecti...
In this video, we are showing several steps on how to install a C.C. RIDER solo seat on your Harley Davidson Sportster. Replacing a stock seat is an easy installation you can do at home with a screwdriver.
#harleydavidson #harleydavidsonsportster #Sportster #springsoloseat #howtoinstall

Пікірлер: 34

@alizarooni 3 ай бұрын

Thank youuuu

@CCRIDERSEATS 3 ай бұрын

You are welcome!

@joeyl3153 Жыл бұрын

Got this for the 2022 iron 883 , it doesn’t seem to fit , it’s slightly off , the bolt in the back doesn’t reach the plate , and doesn’t seem to reach the tank bolt with out struggling to pull it

@CCRIDERSEATS Жыл бұрын

Please contact our customer service with the order information and photos of the issue you met. Our customer service team will surely provide help:)

@BoneIslandScooby Жыл бұрын

My question is how do these seats affect seat height in comparison to the stock seat? Generally, if one of these solo saddles were mounted rigidly, I imagine they might bring seat height down from the factory seat. What happens if you add 2 inch beehive springs? Are you still below factory seat height? How about the 3 inchers and 4 inchers? If you need a specific bike as an example, let's assume a Sportster Iron 883, or maybe a Sportster 48. Seat height is important to me with an inseam less than 30 inches.

@CCRIDERSEATS Жыл бұрын

The seat height would be similar to your stock seat installing this spring solo seat. It can bring the legs closer.

@everglades41 9 ай бұрын

Spent all weekend trying to mount this seat. Still trying to screw in the bolt to the frame but I can't find a wrench that will fit under the fender to tighten it enough.

@CCRIDERSEATS 9 ай бұрын

Please feedback photos of the issues with your order information to our customer service. I am sure our customer service would provide help:)

@JahshuaGiveon 8 ай бұрын

I had to remove the tire unfortunately

@CCRIDERSEATS 8 ай бұрын

Please feedback photos of the issues with your order information to our customer service. I am sure our customer service would provide help:)

@hovanti Жыл бұрын

What about the hinge part already on the bike? What video covers that? I'm thinking about getting a seat like this for my 2005 883XLH Low, if it will fit.

@CCRIDERSEATS 10 ай бұрын

Hi. The seat fits a 2005 883XLH Low. 😀

@hovanti 10 ай бұрын

@@CCRIDERSEATS Thanks! Good to know, since I'm still looking.

@CCRIDERSEATS 10 ай бұрын

😉You are welcome.@@hovanti

@DevisMizza Жыл бұрын

Excuse me, will the springs skratch or damage the fender during use?

@CCRIDERSEATS Жыл бұрын

Hi, The springs would not damage the fender during use.

@hexZ06 Жыл бұрын

Would this work with no rear fender ? I see it bolts to the fender

@CCRIDERSEATS Жыл бұрын

Hi. The seat would need to be attached to the rear fender for the installation.

@genehollom9470 2 жыл бұрын

Will the springs contact the fender

@CCRIDERSEATS 2 жыл бұрын

Hi, the seat will contact the fender. For further information, please refer to the installation part in the video. It should help:)

@marcel9763 2 жыл бұрын

Can you mount it without the spring?

@CCRIDERSEATS 2 жыл бұрын

Hi, sorry, this is a spring solo seat. It mounts with the spring as a set.

@eliseogiusfredi451 Ай бұрын

Would this work on a 2021 iron 883? Thanks

@CCRIDERSEATS Ай бұрын

Yes, this seat works with a 2021 Iron 883.

@siremington 10 ай бұрын

will this mount onto a 2006 xl883 sportster

@CCRIDERSEATS 10 ай бұрын

Hi. Yes, this seat fits a 2006 XL883.😀

@maciejxxx4059 Жыл бұрын

Can you set srpings back away from fender? Seems like IT is posssible.

@CCRIDERSEATS Жыл бұрын

Sorry, this seat is a spring solo seat and could not be installed on the bike if the spings are away.

@maciejxxx4059 Жыл бұрын

Forgive me, you probably didn't understand. My point was whether you can turn the springs on the bolts in such a way that they are not parallel to the fender, but slightly pushed to the outside

@CCRIDERSEATS Жыл бұрын

@Maciej xxx Slightly pushed to the outside is alright. The force effect will be better if installed in parallel, so it will usually be installed parallel to the fender.