How To Install a Spoilboard on a Phantom CNC
Рет қаралды 6,902
Күн бұрынIn this video, we show how to properly attach a spoilboard to a vacuum and non-vacuum CNC machine. This can be the process for both Phantom and other brand CNC machines. Having a proper spoilboard is essential to having an accurate machine and good cutting performance on any CNC machine.
Items used:
Sealants:
Contact Cement: www.amazon.com/dp/B000CD7QWK/...
Flex Seal: www.amazon.com/dp/B01GFY9YKQ/...
Titebond Quick and Thick: www.amazon.com/dp/B00CLTX0YQ/...
Vacuum spoilboard screws:
Non-vacuum spoilboard screws:
Silicone Caulk: www.amazon.com/dp/B000PSDEKA/...
Website: www.phantomcncsystems.com
Instagram: phantom_cnc_systems
Content Creators:
Nick Leonard: / statedwoodsco / statedwoods
Izzy Swan: / izzyswan . / izzyswan_woodworking
Nolan Thompson: / nolanbuilt
/ nolanbuilt
@scottweinbrecht2143 Жыл бұрын
I didn't think of the LDF. Very good and informational video.
@carterscustoms6266 Жыл бұрын
I wrote a program that has all of my mounting holes and the counterbores in it. That way the screws always go in the same place. (I drilled and tapped my holes in the table 1/4-20)
@justintanner4489 Жыл бұрын
Was just thinking this too. Care to share?
@carterscustoms6266 Жыл бұрын
@@justintanner4489 I'll be glad to!
@whattime1973 Жыл бұрын
That’s a great way to do it!
@blankcreativellc Жыл бұрын
Dude, brilliant. Appreciate these videos.
@whattime1973 Жыл бұрын
Thanks for the support !
@jxfontao 9 ай бұрын
keep the videos coming, all information is appreciated
@phantomcncsystems 8 ай бұрын
More to come!
@raymondbass9657 11 ай бұрын
Great video, Nick
@1914Designs Жыл бұрын
Very helpful.
@whattime1973 Жыл бұрын
Thanks for all the support!
@grundlancelot Ай бұрын
Hey man, I’ve been eyeing out a CNC, came across your videos and phantom. I really like what the shadow offers, but I’m wondering if I can cut tenons with the board standing vertical instead of horizontal?
@MrMerlin1065 Жыл бұрын
how about doing a video of tramming on the Phantom
@whattime1973 Жыл бұрын
We will be getting a series of videos out on this and we will have tram gauges on the website soon. Thanks for the watch!
@vladyerus Жыл бұрын
Any idea of possible tramming video?
@vladyerus Жыл бұрын
Oh nvm this has been answered thank you. Look forward to more videos on this machine
ALL STAR CNC PRODUCTS
Рет қаралды 591
MultiCam CNC
Рет қаралды 20 М.
Skillbox Программирование
Рет қаралды 923 М.
Wrecker
Рет қаралды 464 М.