How to Install a Strap Button on an Acoustic Guitar (Safely)

Рет қаралды 71,084

Жыл бұрын

This is how to install a strap pin on an acoustic guitar, without damaging the neck heel!
▶ Get a new strap pin for your guitar here: bit.ly/3RdlMkh
▶ Get all the tools you need to clean and care for your guitar HERE: bit.ly/4bDBZaC
▶ Get the T-shirt Jim is wearing: bit.ly/3X6oegn
▶ Shop Your Gibson Guitars HERE: bit.ly/454Y5jX
Strap button placement on an acoustic guitar can be a polarizing topic. Is the best placement at the end of the heel or on the side? Don’t worry; Gibson’s Master Luthier Jim DeCola is here to walk you through the pros and cons of each option and to show you how to install it yourself on this episode of “Gibson’s Guide to Guitar Setup and Maintenance.”
If you want to change the location of your acoustic guitar strap button or move the acoustic guitar strap pin elsewhere on the guitar, it can be daunting trying to figure out where to place it and how to install the strap button safely, without damaging your guitar.
In this tutorial, Jim shows us some tips and tricks on the safe installation of acoustic guitar strap buttons and how to drill in into the guitar heel in a way that ensures the guitar’s neck heel doesn’t crack. Watch as he shows you which types of drill bits to use, how to make sure the screw fits correctly and the correct angle to drill in so that your neck heel is protected using this J-45 as an example.
If you want to move the guitar strap pin on your acoustic guitar, or install a new one, this is the tutorial for you, brought to you by the Master Luthier at Gibson guitars, so you KNOW it’s going to be the best way to do it!
For more detailed information on guitar setup and maintenance, or more complicated DIY repairs, be sure to check out Gibson’s FREE Virtual Guitar Tech service at www.gibson.com/en-US/Support/....   
 
#gibson #gibsontv #guitarmaintenance  
📼 Related Videos To Watch Next:
▶ Watch every episode on how to set up your Gibson guitar: • Gibson | Gibson’s Guid...
▶ How to adjust the action on your acoustic guitar: • How To Adjust the Acti...
▶ Meet the people who build your Gibson Custom Shop guitars: • Gibson Custom Shop Tou...
Find Your local Gibson Dealer: www.gibson.com/en-US
📩 Get Gibson guitar news before ANYONE else: bit.ly/GetGibsonNEWS
📱Follow Us On Social Media For The latest Guitar Gear!
▶ / gibsonguitar
▶ / gibsonguitar
▶ / gibson
🔔 Subscribe To Our Channel: / @gibsonguitar
SHOP GIBSON BRANDS
www.gibson.com/
www.epiphone.com/
www.kramerguitars.com/
www.steinberger.com/
www.krkmusic.com/
www.mesaboogie.com
www.maestroelectronics.com
ABOUT GIBSON BRANDS
Gibson, the leading iconic guitar brand, has shaped the sounds of generations of musicians and music lovers across genres for 127 years. Founded in 1894 and headquartered in Nashville, Gibson Brands has a legacy of world-class craftsmanship, legendary music partnerships, and progressive product evolution that is unrivaled among musical instrument companies. The Gibson Brands portfolio includes Gibson, the leading guitar brand, as well as many of the most beloved and recognizable music brands, including / @officialepiphone , which has been on every stage since 1873, Kramer, the original MADE TO ROCK HARD guitar brand, MESA/Boogie, the home of tone, and KRK, behind great music for over 30 years, and Maestro, the founder of effect pedals. Gibson Brands is dedicated to quality, innovation, and sound excellence so that music lovers for generations to come will continue to experience music shaped by Gibson Brands.

Пікірлер: 79

@gibsonguitar Ай бұрын

▶ Get a new strap pin for your guitar here: bit.ly/3RdlMkh ▶ Get all the tools you need to clean and care for your guitar HERE: bit.ly/4bDBZaC ▶ Get the T-shirt Jim is wearing: bit.ly/3X6oegn ▶ Shop Your Gibson Guitars HERE: bit.ly/454Y5jX

@TeamCray1 2 ай бұрын

Thanks it worked for me! After owning my Hummingbird for 12 years I finally got the nerve up to do it!

@gibsonguitar Ай бұрын

Glad we could help!

@joeappel1 Жыл бұрын

Thank you! I followed your instructions when installing a button on my J-45. It all worked out just fine. I almost dropped my drill on my guitar bringing tools into my cluttered office, so folks find yourselves a nice clear area to do the job!

@markusbaldingen7248 Жыл бұрын

I'd recommend doing it where we usually do the most important things in life: in your bed. 😉 This is the most no-nonsense description I have seen so far. Well done, Jim!

@neilwalter6260 Жыл бұрын

Just got a Songwriter J 45 and panicked when I realized it had no strap button. When I looked in side the case I found one. However, I am a klutz when it comes to installing, fixing, and repairing. Thank goodness for your excellent video. I followed your instructions to a tee and didn’t screw anything up. ❤😊

@musicsucks5843 Жыл бұрын

Very nice of you guys to make this video, very informative, but I ain’t touching any Gibson with a power drill lol😂

@nickhendrix6243 Жыл бұрын

Wow, great timing! I just got a new J45 and was planning on installing a strap button this weekend. Thanks Gibson!!

@Bliggick Жыл бұрын

Before you do anything I think it's a good idea to check out the end of the strap you intend to use. Is the leather end short enough, thin enough and flexible enough to fit up against that corner it will be up against where the neck joins the side? I've had nice straps that I could not use on a strap pin that had been installed this way. There simply was not enough room in that corner for the end of the strap.

@mikebaruffa5308 Жыл бұрын

Just followed this confidence building instruction.Results! A flawless installation on my Hummingbird! Thank you for the great instruction!

@BlackTreasureMap 11 ай бұрын

I just bought a new hummingbird yesterday! Did you go exactly one inch up and exactly on the crest? It seems 1.5 inches up would be better centred. Thanks

@kmickp1166 Жыл бұрын

Dear Gibson, make this problem go away by installing the second pin during the production process! Thanks!

@f3uibeghardt522 Жыл бұрын

They can put electronics in their acoustics, but not a simple strap button. I guess installing a strap button at the factory just isn't historically accurate enough, but the electronics they put in 95% of the acoustics they make somehow are.

@arthurmurfitt7698 Жыл бұрын

lol not everyone wants a strap button...

@kmickp1166 Жыл бұрын

@@arthurmurfitt7698 pro or semi pro musicians would disagree!

@jefflevy3557 Жыл бұрын

Would be great if they would glue a shaped block inside the upper bout at the factory. Invisible from the outside to please the vintage fetishists but ready to drill in a standard (Les Paul) location for those who desire.

@Harrisabd 5 ай бұрын

@@f3uibeghardt522 lmao, this exactly

@geirandreassen2894 Жыл бұрын

Great! Did this on my dobro, became much easier to play with a strap. Many thanks!

@shanecohen1850 Жыл бұрын

Thanks for the help. I was crapping myself, but it came out great. Cheers!

@ajdsp Жыл бұрын

Just what I was looking for. Thank you !!!

@TheRrgilm Жыл бұрын

Great Advise. Thank you very much!!!

@Anthony_Williams1216 Жыл бұрын

Great info man, thank you!

@thomasfritsch3536 Жыл бұрын

Wow just when I need it too thanks man good 👍 Job

@cbiltz75 Жыл бұрын

Great video Jim!!!

@you0nlylivetwice Жыл бұрын

I've been postponing isntalling strap locks on my epiphone masterbilt, this video arrived just in time

@tomaszgruszewski1520 27 күн бұрын

Just installed strap button on my acoustic - great tutorial and valuable details, thank you Gibson team 🎸

@kevinmartin4787 Жыл бұрын

Thank you!!! 👍👍👍

@adamdelarozza1985 7 ай бұрын

Thanks for the wax tip, it came in handy. Waverly button strap comes with a Gold color screw and its probably brass and not as strong as other metals. I still used it but drilled with a 0.08 " bit one inch @ forty five degrees then bigger bit ~0.11" for an inch at forty five degrees. That's where the wax was used and it's snug and doubt it will break now...🎼🎸

@thomaswelborn6615 3 ай бұрын

Thanks for that, I didn't notice either til I went to put a strap on , I'll have it on soon enough

@boyddustin 9 ай бұрын

Thanks!!!!!!!!

@martinjohnburton1556 Жыл бұрын

Thanks for the instruction. Very useful. One question I have recentley bought an epiphone B.B King Lucille which has the strap button on the heel and was wondering if it is possible/wise or not to install an extra strap button on the top shoulder

@baynesstreetblues Жыл бұрын

One caveat about going ahead with this lock pin installation, if you have an electro acoustic (as I do) be aware that repositioning the nut on the heel of the guitar causes the strap to obscure easy access to volume and tuning slide adjustments. It’s doable with the strap lifted. Overall moving the nut to the bottom of the neck is a neater outcome I believe, after having had a shoelace around the headstock for two decades!

@monoposto2285 8 ай бұрын

Would like to see the guitar with strap installed being worn to reassure me that this is the position I want for my Gibson Blue Ridge guitar strap.

@petiottauru2608 Жыл бұрын

Thanks Gibson

@MatPL32 Жыл бұрын

Next: How to make guitar at home 😁

@mandoist Жыл бұрын

Some close-ups would be nice, too

@greedygringoprospecting6941 Жыл бұрын

changed the strap buttons on my lpb-2. to schaller strap locks. ,schaller bridge ,keys ,strap locks ,knobs. great bass. 👍👍👍👍👍👍

@fmboulevard59 10 ай бұрын

Hi Jim ! I own a J 45 deluxe Rosewood. The guitar had already placed strap buttons. My issue is that the Gibson ASAC-TAN Montana Strap Tan *belt, while I play it produces leather screeching sounds, at the neck of the guitar. Is there a way or a compatible strap link that can hold the strap away from the necks' surface ? I hope my issue was clear enough... Many thanks in advance for your expert insight!

@aanstadt 6 ай бұрын

Remarkable you can spend thousands on a guitar and we’re expected to drill into the wood of the guitar to add something as minimal as a strap pin. Historically accurate is not an excuse. If someone doesn’t want it it’s a lot safer for them to remove it as it is form me drilling into my brand new hummingbird, and chance messing it up. Unreal!

@hatemmegaly9613 3 ай бұрын

Thanks, I see various screws on Amazon, 12mm, 14mm and 17mm, etc. Which one should be better for classical guitar?

@chrisdaviesguitar Жыл бұрын

can you post something on how to keep a Gibson Flying in tune?

@f3uibeghardt522 Жыл бұрын

Check the nut slots or get a string butler.

@georgespencer3973 Жыл бұрын

If you had a Banner 42 reissue, would you install a 2nd button?

@gibsonguitar Жыл бұрын

If you are planning on playing it onstage, add the button

@georgespencer3973 Жыл бұрын

@@gibsonguitar Thanks for the input. Very nice guitar, by the way. I’m super happy with it.

@smagow2320 Жыл бұрын

Что за модель гитары, что за голова????

@polygonalmasonary 26 күн бұрын

If you need to measure the diameter of the drill bit and screw with callipers, DON’T do this job yourself, you don’t have enough experience working with wood, or these tools. Hold the screw up then hold the drill bit up against it. The drill bit should be just a little thinner than the thread diameter. Doing it by eye means less opportunity to make number mistakes. 👍🇬🇧🙏🌈♥️

@JuanTorrance 5 ай бұрын

I would move to Montana only to be a part of gibson. Masterpieces.

@melancholyman96 Жыл бұрын

Why the hell doesn't Gibson install them at the factory?

@i.m.22 Жыл бұрын

Depends on the Model. My j15 has a strap button at the heel of the neck from factory.

@melancholyman96 Жыл бұрын

@@i.m.22 And my 2008 hummingbird doesn't have one, which is why I'm outraged.

@arustydodge2111 Жыл бұрын

Always love these segments with JIM DeCOLA. The man is a Craftsman; explains everything in a easy to follow format.⭐️⭐️⭐️⭐️⭐️

@fix135 Жыл бұрын

@@melancholyman96 Outraged? Try a Valium dude. Annoyed, maybe. But outraged? You're gonna have a stroke from high blood pressure.

@melancholyman96 Жыл бұрын

@@fix135 I'm interested in guitars, not drug addicts with their idiotic advice.

@SamLowry_DZ-015 Жыл бұрын

How to get rid of a buzzing string on an acoustic guitar?

@johnvalderrama9339 Жыл бұрын

chk your neck relief

@frogblues Жыл бұрын

Remove the buzzing string and it will no longer buzz 😂

@SamLowry_DZ-015 Жыл бұрын

@@frogblues 🤣

@rjaquaponics9266 19 күн бұрын

Why didn't you demonstrate how to properly use a strap on the installed strap pin?

@rockman49er Жыл бұрын

Just looked on sweetwater luthier prices and omg its 50 bucks just for this and other prices are more than my guitars are worth lol i should of became a luthier

@ultrakool Жыл бұрын

jim has the perfect shaped head to shave it completely bald, unlike some lightbulb heads out there trying to pull off bald 🙄 sry. couldn't help noticing and now back to our regularly scheduled programing...

@heraic Жыл бұрын

집에서 할 수 있는거였구나

@petiottauru2608 Жыл бұрын

Maurice TAURU

@albertmorgan9021 Жыл бұрын

I personally don't like this and won't have it done to any of my guitars i place them in the body right above the neck where it curves in the center . I drill a small hole and on the inside of thebody , i place a small wooden block glued in place i use a screw with a nut to hold strap button it works extremely well and looks the way it should does not change tone looks professional most people will tell you don't drill a whole in your neck as you can easily do a great deal of damage to your guitar some one said this guy is a master luthier and I mean him no disrespect I'm merely stating my preference and what I've been taught in my 55 years of life I cherish my guitars and I've had them for a long time and kept them playing and in great condition all on my own no I'm not a master luthier I'm a player at any rate good luck no matter how you decide to put your strap button in I think even this master luthier will tell you enjoy your guitars have fun play lots life is good and thanks for the lesson even if some of us have a different preference and been taught different good luck God bless play on

@fix135 Жыл бұрын

The guy in the video is a master luthier. I think I'll take his word for it.

@manuelpachuca4222 10 ай бұрын

♍️🤘📐

@billwinter6417 6 ай бұрын

Do mean unbalanced?

@zimmee 3 ай бұрын

My J45 came with a cheap nasty aluminium strap button and wood screw like the ones from a pound store. Come on Gibson?

@michaelyolch79 Ай бұрын

Okay...stand back...just bought a brand-new $3K J-45. I'm going in! Maybe not. Yes! No. Ugh!

@pletonicsolids 8 ай бұрын

I'm so fucking scared

@bobdekett Жыл бұрын

...lol...don't even try this at home...just go to your local 'luthier' who will install it while you wait...

@fix135 Жыл бұрын

I did it on my Hummingbird years ago and was easy as pie. I did it the exact same way as he did in the video. I got the idea from the way the button was installed on my Baby Taylor. No big deal.

@frogblues Жыл бұрын

Most people can follow these simple instructions, and it's exactly what a local luthier would do.

@bobdekett Жыл бұрын

@@frogblues yes - my local luthier made it look simple...prolly because he does more than most people...I didn't want to chance it on my custom shop 000-28...

@frogblues Жыл бұрын

@@bobdekett I get it. I was just messing with you. Always smart to hire an expert if you're not sure.

@Bestsmurf Жыл бұрын

Cringe! This guy is a good mechanic, someone with less experience might not want to be waving the guitar and drill around. try laying the guitar face down and covering the body with a towel.