Quality probably wasn't good so if you have any questions leave them and ill answer. Just remember to match colors and you'll be good.
Пікірлер: 51
@stryker8195 жыл бұрын
Omg that was the most easiest and fastest stereo install i have ever done. Thanks for the info !!!!
@gannongraysen97493 жыл бұрын
i realize it is pretty randomly asking but does anyone know a good place to stream new series online ?
@chrisdavis78835 жыл бұрын
my 03 gt has the 3 harness in the back of the radio too. your how to is the easiest ive found on doing the wiring. thank you!
@machnone79675 жыл бұрын
Thanks man i'm just happy my video helped someone cause it was confusing for me to figure out
@chrisdavis78835 жыл бұрын
@@machnone7967 i put my pioneer in today and it went extremely smooth cause of your video. Im not real proficient in wiring, so thanks again!
@sethconover99044 жыл бұрын
BRO THANK YOU. You're the only person I found with the same setup as me that knew how to wire it up
@machnone79674 жыл бұрын
Seth Conover haha ya mom
@29ifyfelix4 жыл бұрын
Can you send me a link to what exact stereo kit you used, the single din one, because I've seen so many types
@chrisroberts9534 жыл бұрын
Hi MachNone do you still have the part numbers for the wire harnesses and mounting bracket I’m literally getting the same radio but idk where to get those other things
@prohealthsingh21255 жыл бұрын
thanks for the video! i installed a single Din Kenwood stereo in my 2003 Mach1 with Mach460 sound system.
@machnone79675 жыл бұрын
Happy to help
@29ifyfelix4 жыл бұрын
Hello can you please send me a link to what kit you used to install the stereo for single din, I have the same exact thing
@29ifyfelix4 жыл бұрын
Please and thank you!
@refinedautodesigns3 жыл бұрын
I have the mach 1000. Same deal to install?
@andrewcunningham27823 жыл бұрын
I am so confused so sorry for the stupid question, I have never installed a radio before and am trying to do mine in a 2001 mustang gt. Do I need a wiring harness or is it possible to do it without? The new radio only has one big plug for power etc, but the old one has a few
@jimmymaupin47628 ай бұрын
What about replacing the three black ones under radio buttons switches any thoughts
@leonelmartinez24864 жыл бұрын
Can this work for the mach 1000? So far ive only found mach 460s tutorials
@AXEMAN-od8goАй бұрын
I don’t have a blue and white wire from the harness only the antenna wire how do I make this work
@genericdude65513 жыл бұрын
Gotta be careful because some stock radios are not the factory installed premium sound system. The 3 multi-conductor connectors are a dead giveaway. The non-premium setups only have 2 multi-conductor cables. This video shows the premium system. Makes a difference when ordering cables! This video doesn't show the complete cabling that needs to be done. The cable kit he needed was the Metra 70-5701 or the Red Wolf premium sound wiring kit. Plus some after market radios have a DVD player that has a long green wire in the radio cabling that needs to be connected to the parking brake. I haven't found a video that shows how to connect it.
@chrissgarage20113 жыл бұрын
Hey man I really need your help I just bought a Mustang and only the front tweeters are playing nothing else the amps are good I took out the radio and saw that the wiring as a little Miss configurated if you see this could you please get back to me ASAP please
@SawBlood453 жыл бұрын
Lost all my tools from my last stereo installation, put a double din with bt mic on a 2000 F150. That was alotta fun. Now my Mach 1 needs the upgrade. I dunno if I should go buy another crimper and caps or just let crutchfield wire em for me like a lazy ass.
@kevvodinero87854 жыл бұрын
Yo bro what is the size of the radio? There is so many size options 🤦🏻♂️
@tommonteforte18162 жыл бұрын
Ok listeners! I have a 2002 mustang gt with Mach 460 system . Factory radio has 3 plug harness. This is where I got confused! The third wire harness with the 3 wire from factory radio will not need to be used at all . Just follow this videos steps and there you go ! It works!
@bbelitereАй бұрын
So my read ports are different cuz it’s a different unit obviously; any idea which exact port you plugged the white one into? Red went to the sub and the white went ?
@scar45783 жыл бұрын
What happens if u don't use a step down?
@Jcscmnnrp Жыл бұрын
what radio is that?
@WayUpstate4 жыл бұрын
So what do you do with the third plug on the factory harness that the "power antenna" would have plugged into?
@machnone79674 жыл бұрын
Sykotik 2V dont use it idk what cars need it but i doubt its the new edge mustangs
@genericdude65513 жыл бұрын
There's a third OEM harness for my Mach 460 system and if I'm reading the wiring diagrams correctly that third OEM harness is a speed sensor input that controls the OEM head units volume (there's a setting for it). Apparently, the aftermarket units don't have that option.
@genericdude65513 жыл бұрын
If I understand correctly, the stock Mach amps have high and low pass filters for feeding the tweeters and woofers, respectively, so the crossover settings aren't necessary?
@bbelitereАй бұрын
So I dont need that crossover piece ? Just got my wiring harness in and I don’t have one of those
@BossHogg3024 жыл бұрын
Is the step down for the amplifier pop? If so where did you get it?
@machnone79674 жыл бұрын
Order it off crurchfield I got it at a local stereo store
@ryzayria14 жыл бұрын
What about the brown wires. What color wire did you connect them to
@machnone79674 жыл бұрын
Just color match with all the other colors
@selfundone4 жыл бұрын
I was totally following until you got to the 12 to 5v step down. I don't know where that came from. I got the metra 70-5519
@jacobpowers65534 жыл бұрын
What did you do if you Didnt have a stepdown
@selfundone4 жыл бұрын
@@jacobpowers6553 was a while ago. but I just ignored it. I think when i got the metra it came with instructions, or I just used this video. I honestly can't remember other than it wasn't really that difficult. and the metra kit was all I needed. was essentially just a tedious process of matching up the wires. and the metra fit wasn't perfect. there was a bit where i thought I ordered the wrong part but it fiddled with it A LOT , and got it in.
@target11723 жыл бұрын
How’d u end up routing the usb? I’m tryna make it clean
@dr-bl8ph2 жыл бұрын
routed it under center console and drilled a hole and put a grommet
@seabassgt79984 жыл бұрын
2000 and lower has a completly different radio. Its 2 single dins so dont plan on easily swaping a double din in there
@juanace25413 жыл бұрын
This is the problem I'm having
@chrisroberts9534 жыл бұрын
And is yours convertible
@jacobpowers65534 жыл бұрын
I dont have a stepdown what can i do
@machnone79674 жыл бұрын
Don’t need it
@mustangguru78103 жыл бұрын
What year mustang is this?
@dr-bl8ph2 жыл бұрын
2003
@kawalt10 ай бұрын
1999 is different.
@machnone79674 жыл бұрын
Selling My car for $10,000 message me or whatever you do on here for Craigslist posting including all mods and information on car
@vela.blendz98937 ай бұрын
All I hear is blah blah blah I don’t speak wires this shit don’t make sense