How to Install an in-wall speaker the correct way! Professional Speaker Installation!

Рет қаралды 54,896

4 жыл бұрын

Professional technicians by Divine Audio Visual explain step-by-step how to install an in-wall speaker from any brand. Follow this guide to get it done the right way
We are professional AV and Home Theater | Home Theatre installers in DFW Texas.
Custom system design - Free of charge - Call our audio engineer Warren 214.600.4144
Website: Avoftomorrow.com
Email: divineavinc@gmail.com
Service Areas: Home Theater installation DFW | Home Theatre installation Dallas | We service DFW Dallas area including Frisco, Mckinney, Prosper, Little Elm, Las Colinas, Irving, Celina, Melissa, Southlake, The Colony, Savanna, Lewisville, Carrolton, Plano, Allen, Fairview, Lucas, White Rock, University Park, Highland Park, Flower Mound, and parts of Austin by request.

Пікірлер: 44

@briannewson8395 2 жыл бұрын

Very helpful video guys. Just installed my first in wall speaker. 6 more to go. Thanks!

@silvanadair4888 19 күн бұрын

For the hole cutting, if you don’t know what’s back there, start with a small hole to probe for hazards before expanding to full size

@DivineAV 19 күн бұрын

@@silvanadair4888 wise words, indeed

@dlorbieski 4 жыл бұрын

Informative and well presented....thanks for sharing 👍👍

@jadan2000 3 жыл бұрын

Thx for this How to guide.

@Doctrtony 2 жыл бұрын

New construction speaker brackets are clutch in this situation 🙏

@hometheaterman1424 4 жыл бұрын

That was a really great video Warren and Dereck I learned a lot by just watching your videos you guys are doing great. Where was Mercedes and Bennie at? And who was filming?

@DivineAV 4 жыл бұрын

My brother and I traded off filming. Mercedes was doing the rack and Bennie back in Dallas on another job

@hometheaterman1424 4 жыл бұрын

@@DivineAV wow that's awsome Warren. Great job buddy.

@julioemory8339 2 жыл бұрын

instablaster.

@jcnevamind 2 жыл бұрын

How do the clips work if you’re up against a stud?

@FBC2012THECOLONY 4 жыл бұрын

What kind of magnets where those called and where can you purchase them?

@yolandagilliams2 Жыл бұрын

Can these speakers be used to transmit infrasonic sound through the wall of neighbor that share wall...I don't know if it's this type of speaker but most likely a directional one...

@vishnuramia2140 3 ай бұрын

So in the prewired part. How do you install the speaker. Wouldn’t the stud get in the way of the speaker clap? The clamps on the speaker are supposed to grab on to drywall right? How do we get around the side that is next to stud?

@DivineAV 3 ай бұрын

Drill a very small pilot hole through the clip and run a screw straight into the stud. Very simple procedure and doesn’t damage the clip. Thanks for watching.

@AllAboutVideography 2 жыл бұрын

Hi there, I really enjoy your videos. A question for you. Do inwall front speakers need to be angled to the sweet spot listening position like floor speakers?

@DivineAV 2 жыл бұрын

Great question. In an ideal world, yes. But we don’t typically have that luxury so we choose a wide dispersion speaker to act as the LCRs. Having speakers behind the screen is the most cinematic solution. Feel free to reach out if you need product. Divineavinc@gmail

@RJ-js3bh 2 жыл бұрын

Helpful video. Recognizing it’s a year old and you may not be monitoring comments, you mentioned not using a speaker grill behind an AT screen. A screen manufacturer told me the grill is actually beneficial, and I don’t recall why. It logically makes sense to remove, so I was surprised when they told me keeping on is best. Any insight/thoughts?

@DivineAV 2 жыл бұрын

Hey buddy, we appreciate you watching and we try to rest to get back to all the comments no matter what video. As far as sound quality, removing the speaker grill will certainly cost less obstruction of sound. However, certain speakers have reflective materials on the drivers and therefore you may see them shining through the screen if you don’t have the speaker grill installed. If you’re going to install the speaker grill, I would remove any cloth backing and spray paint the grill matte black. Thanks for watching my friend, we will have some new content out shortly. We’ve been doing a ton of jobs

@djdnewworld 3 жыл бұрын

Any video on 2 story house of running speakers wires on the first floor.

@DivineAV 3 жыл бұрын

We don't have any videos of that at the moment but there's multiple ways to run wires. If you're trying to do ceiling speakers, you can go upstairs and see if you have carpet above that area, you can basically run flat or thin speaker wire under the carpet and drill through the floor to drop the wires. The equipment can be somewhere upstairs in a closet where you at an outlet and then use universal remote control to operate things.

@pluggedindacityproductions3512 3 жыл бұрын

hey what was the link to those rare earth magnets

@MarvinWoodard 3 жыл бұрын

Appreciate this video. Very informative. However, how would those same Klipsch speakers clamp in next to the stud? Asking cause I've had issue with that in the past where the clamps bumped up against the studs instead of locking in.

@JoseRodriguezFrio 3 жыл бұрын

move the speaker, stud isnt going anywhere

@bodydes 3 жыл бұрын

Curious as well. He pulled the jbox, flush cut to the stud to install the speaker. If the clip system spirals towards the top or bottom plane first it would trap drywall then hit the stud. Take advantage of studs being vertical... But I've no idea if that's how it works... Looking to those in the know.

@DivineAV 2 жыл бұрын

Hey guys, we never saw this comment. Use a screw and screw it into the stud so the clip can grab on to the screw. You can also screw straight through the clip into the stud if you’re not worried about warranty.

@JoseRodriguezFrio 3 жыл бұрын

soundproofing?

@arjundhillon5214 3 жыл бұрын

What’s your thought on back boxes ?

@DivineAV 3 жыл бұрын

They do make a pretty significant difference with low end frequency response. We have custom built a few of them and ported them into the room. It was pretty awesome. We will probably be custom making these soon

@pmc13812 10 ай бұрын

Can you please advise if this is adequate for concrete wall ?

@DivineAV 10 ай бұрын

These clips can attach to concrete board if it is suspended from studs. Please elaborate if that doesn’t answer your question. Thanks

@josearuquipadiaz3557 2 жыл бұрын

Saludos. Destruir la pared para un gusto me parece al exagerado. Mi opinion.gracias

@Mortagleus 10 күн бұрын

How is the install on exterior walls with vapor barrier?

@DivineAV 10 күн бұрын

@@Mortagleus depends on the build, but most likely exactly the same. In the United States the majority of walls are going to be 2 x 4 or 2 x 6. From inside out: sheet rock, insulation in stud cavity, Osb sheathing, vapor barrier, exterior finishing solution. There wouldn’t be a vapor barrier on the sheetrock side because then it would lock in moisture between the studs. If you’re talking about mass loaded vinyl or something like that, you would need to use a back box with mass loaded vinyl, completing the circuit. Let me know if that answers your question. Thanks buddy.

@DivineAV 10 күн бұрын

I’m realizing, perhaps you’re talking about putting an in wall speaker to play into an exterior space like a patio. If that’s the case, cut the hole out first using a jigsaw, Get a specific back box for the speaker that you’re trying to use, cover the entire backside of the box with something like Dynamat, Put Weather strip around the inside of the speaker lip prior to installation, install the speaker securely. If it’s an in ceiling speaker, like on a patio, if you have access above, use an insulating dome and poly seal that against the ceiling material. Then install your ceiling speaker.

@kuisin88 2 жыл бұрын

Curious. I assuming that in wall speaker would do well in hollow wall. What happen if the wall is filled with insulation? Would it still work?

@DivineAV 2 жыл бұрын

It will do just fine. Punchier mid range but less low end Frequency response

@kuisin88 2 жыл бұрын

@@DivineAV Thanks for the reply. Lower end can be augmented with sub(s).

@DivineAV 2 жыл бұрын

@@kuisin88 sure thing. I would go with a decent speaker like Klipsch CS so your mid range isn’t distorted. A good punchy sub helps from 150hz-28hz range.

@yolandagilliams2 Жыл бұрын

I am being harrassed by low frequency sound

@chrissimons8748 Жыл бұрын

Poor Chisel!

@DivineAV Жыл бұрын

www.homedepot.com/p/Buck-Bros-Economy-Wood-Chisel-Set-3-Piece-40601/100076202 They were eight dollars back when we purchased them six years ago. Still going strong 😊