How To Install Brembo Brake Caliper Covers - Quick And Easy
Рет қаралды 703,936
7 жыл бұрынHow To Install Brembo Brake Caliper Covers - Quick And Easy
Here is what you need -
1. Flat Head Screwdriver
2. Tiger Seal
Here is what to do - remove the wheels first...
On the front just lift the wire holder with a flat head screwdriver and push into place ( yes it's that simple )
On the rear clean up the calliper with a wire brush and then clean away any grease using a brake and clutch cleaner - apply tiger seal onto the face of the calliper and inside the calliper cover that's going on - hold into place and leave for 24hrs to set.
DONE!
Where to buy them? - www.ebay.co.uk/itm/4Pcs-New-Di...
---------------------------------------------------------------------------
YOU CAN ALSO FIND ME ON ...
EMAIL - FL4MEWITHA4@hotmaill.com
FUNKO FACEBOOK PAGE - bit.ly/35drFmK
TWITTER: bit.ly/2QCmSpA
FACEBOOK: bit.ly/39semCj
INSTAGRAM: bit.ly/2QcqHCT
@FL4MEWITHA4 4 жыл бұрын
Hey everyone, I now have a new KZfaq channel dedicated to car guides so please come over and show your support - kzfaq.info/love/zlEuw17uBDs5HO1Wxb1yZg
@bongofury5924 3 жыл бұрын
Think how much money Ferrari could save everyone if they merely specified rust-colored calipers on their toys......
@Cockpit_Hour 7 ай бұрын
Must have some serious stopping power now on your bucket of rice
@abum7md705 3 жыл бұрын
Let’s be honest, this video wasn’t recommended, you searched for it, and most probably thinking about getting those covers fitted on your car. So why the hypocrisy ? Great guide and nice results!
@nycliving9514 2 жыл бұрын
LOL i searched s65 calipers and these pieces of shits came up.. lmaooo
@GOPACKERSJT 2 жыл бұрын
It actually came up while looking up a tutorial looking into painting my new Brembos.
@asmodaithericer6840 2 жыл бұрын
Yes, except I don't have a car yet
@Keepmywifesnameoutyafucknmouth Жыл бұрын
I searched what the dumbest thing you can do to your brakes and found this video.
@laggod5783 9 ай бұрын
100%
@BIKEGEARMOTOVLOG 4 жыл бұрын
I have a BMW motorcycle with Brembo brakes. I'm going to have to check when I get to make sure it's not a cover. Lol looks good man
@andrewgonzales3142 4 жыл бұрын
I cant trust nobody with brembo brakes now 😭😭
@davidandrews5510 3 жыл бұрын
That’s a double negative
@coolbreeze2.0-mortemadfasc13 2 жыл бұрын
@@davidandrews5510 So what?
@philipbahia924 3 жыл бұрын
I can't wait to install them on my Calipers on my Accord.
@josecabrera4351 4 жыл бұрын
For all of you complaining and talking shit ...Why don't you buy an original set of Brembos and it send it to him to satisfy your thoughts smh
@enfield7123 2 жыл бұрын
Good video really interesting thinking of putting some on my mokka as the brake calipers are really rusty and have cleaned and painted them ..
@abeYAHU 6 жыл бұрын
Good video, well done 👍
@Luckyboyee777 5 жыл бұрын
I'm waiting for the Lamborghini car cover that transforms my Honda into a elite supercar. Nobody will notice.
@dldeanlong77 4 жыл бұрын
🤣🤣
@GTOHGIC 4 жыл бұрын
Z Car it’s called c8
@evanauditoredafrienze 4 жыл бұрын
You can get one on Wish.com for a dollar
@jokerg1722 4 жыл бұрын
Z Car pinchie mekillo
@john.k.n3099 3 жыл бұрын
You're the main man on this channel...🤣☝
@gordon295 3 жыл бұрын
Nice Job !
@victormucino6239 6 жыл бұрын
Great Video!
@FL4MEWITHA4 6 жыл бұрын
Thank you
@tommyarmour68 5 жыл бұрын
Once again great guide, and thank you. I did notice something that doesn't really matter. But the nipple with the cap is actually supposed to be on top. You technically have it upside down. lol
@FL4MEWITHA4 5 жыл бұрын
Thomas Armour thanks for the info I corrected this after the video but never recorded that part 😊 also i have new ones coming real soon 😊👍🏻
@tommyarmour68 5 жыл бұрын
@@FL4MEWITHA4 I tried to install mine today. They were too small. I tried modifying them but they still rubbed when I installed the wheel. Bummer. I made sure that they were compatible with my car by the eBay listing still would not fit I slid them underneath those clips like you did on yours. But the the other end that supposed to go over the caliper didn't work for me.
@FL4MEWITHA4 5 жыл бұрын
Thomas Armour I am sorry to hear this 😞 what was it that wouldn’t fit ?
@tommyarmour68 5 жыл бұрын
@@FL4MEWITHA4 2019 Accord Sport 2.0t. something on the inside of the cover was pushing it out too far cuz I cut the top off almost completely to try to make it work and it still looked great just couldn't go down enough 2 alleviate wheel rub.
@atenra2436 11 ай бұрын
Nice! Affordable, and look amazing. Not to bad when comparing them to the real ones. Honestly if u are not doing it for performance these are great just for the look it will give your car. I have blue on my car, and got them from eBay as well.
@Da_one_tl 7 ай бұрын
Rice
@Lyfehurts66 5 ай бұрын
How do they hold up..
@atenra2436 5 ай бұрын
@@Lyfehurts66 They were ok but my calipers were to big, even though the seller guaranteed me that they were big enough. So after a couple of adjustments(high temperature silicone type adhesive) they look good on the wheels/rims, calipers give it a little more of a sport look.
@truegrizzlesfan2292 2 ай бұрын
@@atenra2436question have the glue hold up. If so what brand of glue did you used. Thanks in advance
@atenra2436 2 ай бұрын
@@truegrizzlesfan2292 I used a silicone glue from Walmart, check in automotive but make sure it's heat resistant. I forgot the brand but the Walmart employees in automotive will know what u are looking for. U are welcome in advance.
@infectoid666 5 жыл бұрын
Love how the faux transfer pipe on the cover's upside down.
@Neauxluh 3 жыл бұрын
Noobs will never know
@Da_one_tl 7 ай бұрын
@@Neauxluhnoobs won’t even know what brembos are. The only people who will notice these are enthusiasts, who will be instantly disappointed
@shubhamdas4851 7 жыл бұрын
Nice video bro
@FL4MEWITHA4 7 жыл бұрын
Many thanks
@tyrouse1172 4 ай бұрын
what is the best way to install these ? , i seen people gluing them or drilling them in , wich way is more effective im affraid that if glued they will come off eventually because of the heat.
@henryvelasco7736 3 жыл бұрын
Do they last with the heat the clalipers make?
@danielfl.9347 3 жыл бұрын
I have changed to Brembo discs and pads in the front, but the pads do not fit perfectly and they rattle as they,are a tad to big. Do you know about any clips to put in between?
@brunostiglitz7535 3 жыл бұрын
Is tiger seal high temp proof ? Is it just a basic sikkaflex 227 grade or ?
@hammermma7438 3 жыл бұрын
Just if you have a caliper that has a perfect form for the cover
@estebanfabela1952 3 жыл бұрын
I have a 2013 audi q7 prestige do I check the brake sizes first
@tommyarmour68 5 жыл бұрын
My honest opinion is these covers look great. I have owned the MGP, and CCi's(currently have). But these $12.00 ebay covers look better than the others and cost $235.00. less. I bought some ebay covers a few days ago. I'm going to use this method and I'm going to use round magnets on the inside with 3m tape on the inside of the cover for extra protection. Maybe even shoot the inside of the plastic with High Temp red paint. thanks for the video. I hope these work on my 2019 Accord Sport. The others are better quality materials, but they don't look as real as the ebay ones. Somebody needs to make these with aluminum and magnets like CCI uses. My 2 Cents
@sashaghovanlou8175 Жыл бұрын
did it work out for you?
@Da_one_tl 7 ай бұрын
You could also just get a BBK like an intelligent being
@masondry2951 7 ай бұрын
They are made out of brittle plastic so that if they fall of, they will just shatter and not cause damage to wheel or wreck
@karacan23 6 жыл бұрын
I have brembos already but i wouldn’t mind re-painting these covers and put em on there . So much brake dust these covers might reduce it
@FreshCityVentures 4 жыл бұрын
Jon Ayhan why would you “repaint” brand new covers? Just put them on, no?
@ericmichel3857 5 жыл бұрын
These will go really well with the rolled up sock I keep down my pants. :)
@judenazon8111 6 жыл бұрын
will it fit on brakes that went brembo?
@josecalderon4048 3 жыл бұрын
Will this fit a Dodge Challenger sxt soice they are universal cover?
@yuidfbse 3 жыл бұрын
What type of glue/seal needs to be used? Tiger Seal is not something I cant buy where I live. Brake pads can get extremely hot and I dont know what type of proper glue can be used to make sure it doesnt come off. Any tips, appreciated and thanks for your video :)
@FaiSal-ml9uw Жыл бұрын
Probably engine gasket glue will do
@lobo1001000 2 жыл бұрын
Will this fit for audi q7 2016 s line model
@ibizatotalconcept1236 4 жыл бұрын
Ford Eco sport ST-Line 2019?
@wasitbagtittyfckdriving.3840 4 жыл бұрын
All the Brembo caliper covers r the same? I am looking for one atm for my 05 Camry as well.
@FL4MEWITHA4 4 жыл бұрын
Universal 😁🔥👍🏻
@petebmx 4 күн бұрын
No issues with overheating/ melting of the calliper cover?
@volquezm6689 3 жыл бұрын
Will this fit a 17 RX 350 F sport?
@mperformance3502 5 жыл бұрын
Perfect mod for all Taco Bell and McDonald employee ricers
@huseyinklc5924 4 жыл бұрын
quick, easy and cheap way to make your car look better
@najjacitockovi1 3 жыл бұрын
@@huseyinklc5924 of course. This looks cool on all cars. I am personaly JDM guy, but this would go very good on some nice Shelby, for example or maybie... Ford Mustang. It would be very nice on it. I buying car for few mounths, it will be Honda or Nissan, and i will set this things for sure
@ilpatongi 3 жыл бұрын
@@huseyinklc5924 And kill the brakes.
@user-np6dl9iz4k 2 жыл бұрын
It's not damage install it? Because it can fall Or cause the brakes to heat up.
@sean0387 4 жыл бұрын
Good job I ordered some because of your video 👌🏾
@FL4MEWITHA4 4 жыл бұрын
Excellent I have a new one Coming very soon 😊
@johnathangraham248 4 жыл бұрын
Where did you go to order them.
@FL4MEWITHA4 4 жыл бұрын
@@johnathangraham248 Ebay 👍🏻
@johnathangraham248 4 жыл бұрын
@@FL4MEWITHA4 I just looked them up. Ebay is limited on guaranteed fitment for my car. I might go with mgp. Or @cciauto. Thanks for the information though.
@FL4MEWITHA4 4 жыл бұрын
@@johnathangraham248 No problem 👍🏻
@louiecabadas812 4 жыл бұрын
I have a Nissan Maxima 2002, do u think these would fit without any cutting?
@FL4MEWITHA4 4 жыл бұрын
These are universal so you would need to alter them in some way 😁
@chrisbutler2636 3 жыл бұрын
Not bad to say you fitted the backs upside down!!!
@josephbibeau7045 3 жыл бұрын
Also I have 2015 Hyundai Veloster turbo
@andygibson5258 3 жыл бұрын
I could do this just don’t have the tools to take wheel off , would a garage charge much or would it even be better for me to take it to a private tyre place , there is a man I get to change my tyres
@vigneshvalsan6496 6 ай бұрын
Does this effect braking performance ? Just curious 😄 I mean does this reduce heat dissipation ?
@FL4MEWITHA4 6 ай бұрын
All good 👍🏻
@user-fc9ue7zk9n 4 ай бұрын
Hi. Did you have a problem when it is too hot by doing this way on the front wheels? I am asking if the brembo covers are melting without silicone @@FL4MEWITHA4
@FL4MEWITHA4 6 жыл бұрын
If anyone has used this guide to fit these - please send me a picture via Facebook and I will post it on my pages 🔥
@MisfitsGuideToTheGalaxy 6 жыл бұрын
FL4ME WITH A 4 I had seen another video recommending against using these because they were creating a lot of heat and wearing out the brakes. I'm assuming because those had a piece that clipped on the front and back of the calipers maybe caused that issue as ur show to only cover the front which I would assume would make it so the brakes don't best up?
@FL4MEWITHA4 6 жыл бұрын
Terry Nova good question- yes as they only cover the front part, I have had no extra wear than normal - no overheating 👍🏻
@KEVIN-xd6qg 6 жыл бұрын
I do not use Facebook. But if you send me you email i can send the pics
@FL4MEWITHA4 6 жыл бұрын
kavishwara kavinda perfect - it’s FL4MEWITHA4 @hotmail.com 🔥
@KEVIN-xd6qg 6 жыл бұрын
FL4ME WITH A 4 sent. Check your email
@andrewwhite310 4 жыл бұрын
I've got a 2017 and the calipers look crappy already, not even a chrome finish left. I'm thinking about a cover like this because it'll be easier than painting lol
@FL4MEWITHA4 4 жыл бұрын
Universal 👍🏻😁
@freddievilla6471 3 жыл бұрын
Yes !! Beats painting, taping,😀
@AlvlUpSavedMyLife 3 жыл бұрын
Anyone know what covers will for a 98 Audi A4?! Thanks
@jaimemartinez8992 3 жыл бұрын
Any troubles with the caliper cover coming off?
@dflex4180 3 жыл бұрын
u make to small holes in cover and in caliper and screw them in for more security
@jasper_north 5 жыл бұрын
Do they fit on most cars? Volvo XC70? Where do you buy them??
@FL4MEWITHA4 5 жыл бұрын
J A S P E R eBay and yes 🔥
@ned1182 4 жыл бұрын
Can I install a caliper cover over my brembos?
@FL4MEWITHA4 4 жыл бұрын
Why not give it a go 😂🔥
@pedromorales8099 4 жыл бұрын
I wish it fitted on my car that easy
@imzabans1131 2 жыл бұрын
Does anyone know if they fit a 2018 Infiniti Q50 luxe ?
@gierso4015 6 ай бұрын
Hey, how about a temperature from brake? plastic covers not melting?
@FL4MEWITHA4 6 ай бұрын
Nope all good still to this day 😁
@5ubaru55 4 жыл бұрын
At least you got real brembo pads or....
@majidhussain8877 6 жыл бұрын
Would these fit ok on a Lexus is250 2007?
@truthteller2937 5 жыл бұрын
Majid Hussain hi Majid have you tried ? I have the same question!
@kdub9918 5 жыл бұрын
@@truthteller2937 Same here
@crookassassin 3 жыл бұрын
Great video... I think I might have the same ‘front’ Calipers on my Audi Q3 - (approx 210mm in length). I ordered the same Calipers Covers in Medium (240mm Front) and Small (190mm Rear). I thought the 280mm Large would be too big. We’re your ‘Fronts & Rears’ also 240mm and 190mm? Cheers.
@xicelinkx 2 жыл бұрын
Is like to know the answer. I ordered the medium and small size too. Haven't arrived yet. Hope I got the right size. I know I'm a year late lol
@batia0121 2 жыл бұрын
@@xicelinkx Just did the same thing 5 mins ago lol. Mine's a 2011 BMW 328i, hoping the medium + small combo would fit perfectly.
@M4SH786 6 жыл бұрын
Where could i get the right ones for a scirocco 2011 2.0tdi?
@FL4MEWITHA4 6 жыл бұрын
eBay is the best place - find the link in the description :)
@jesussanchez-lw1ny 4 жыл бұрын
the car in the video its an audi a4?
@geoffreywalpole6729 Жыл бұрын
Can someone tell me where I can get some to fit VW T5.
@lucasexplains6227 Жыл бұрын
where can i get them?
@jwalkerftw 4 жыл бұрын
Is This for any car? Would it fit a 2019 Honda Civic hatch
@FL4MEWITHA4 4 жыл бұрын
They are on Ebay as universal, but I would check with the seller on Ebay 😁🔥
@najjacitockovi1 3 жыл бұрын
Bro, belive, it would. As JDM car guy, i am sure it will be nice on 2019 Honda. Just one question, is that Honda Civic VR5?
@najjacitockovi1 3 жыл бұрын
If it is, i am not sure for size... better check somewhere else in car store or at internet. Cheers 😉
@CarKiruks 2 жыл бұрын
These are made of plastic rite ? heating of brakes wont be a problem ?
@FL4MEWITHA4 2 жыл бұрын
Yes and no 🔥
@srtreed3947 Жыл бұрын
What size of rotor and what size of cover
@jaynyanna3932 4 жыл бұрын
I have a 2015 Volkswagen CC are these universal?
@FL4MEWITHA4 4 жыл бұрын
They are universal but worth asking if they fit your vehicle before buying.
@alecsimmons1120 4 жыл бұрын
Wait there was just a glitch in the matrix...instant Brembo brakes? 😵💥🔫
@FL4MEWITHA4 4 жыл бұрын
😁
@ulkucuturk0391 5 жыл бұрын
They dont fit on a BmW F10 530D 2010 😞
@subghat123 3 жыл бұрын
How about when you want to change raer brake shoes?
@ramonlaroco383 6 жыл бұрын
Hi flame; i would like to immitate what you did, up until now are your calipers still intact?^^
@FL4MEWITHA4 6 жыл бұрын
They are very well in tact and still look great, in a few months time I will make another video called, 1 year later to show the wear and condition of the breaks from install up until now 👍🏻
@tommyarmour68 5 жыл бұрын
@@FL4MEWITHA4 Did they hold up well? I'm still trying to figure out a magnet option for the rear covers vs the tiger glue. I'm thinking of getting some molding clay to see exactly where the cover sits against the rear caliper so I can attach the magnets in the correct spots. Just another 20 bucks on clay and magnets. I'm not even sure my covers will fit yet. They said correct size for my car. But the fronts seem a tad small compared to my current covers.
@FL4MEWITHA4 5 жыл бұрын
Thomas Armour yes still all good 👍🏻 let me know how you get on ? 😊🔥
@treyon9190 3 жыл бұрын
I’ll put these on my GT, most of y’all talking but ain’t even got a car🤣
@philipbahia924 3 жыл бұрын
how would you know that some of them ain't got a car,what GT you have
@treyon9190 3 жыл бұрын
@@philipbahia924 17
@j4nz3 6 жыл бұрын
so even if i dnt put a glue it will be safe?
@FL4MEWITHA4 6 жыл бұрын
joseph nicolan - if you don't have the clips you need to glue it on 👍🏻 pushing them on without being secured will be dangerous as they can fall into the moving wheel 😁🔥
@noesanches372 2 жыл бұрын
My car has actual Brembo brakes and I’ve worked on them. Why did this 3rd party messed up on the bleeder valve. They go on top, not the bottom.
@noahburk6263 3 жыл бұрын
Where did you get the covers at? Want to cover my hellcat brembos with red instead of the stock black
@steveregutis9237 3 жыл бұрын
I don't know if you did this already but they do not fit like they should go directly through Mopar and get the proper fitting ones for your Hellcat I did there were about $240 for the set of 4 well worth the money
@shauna-leewilliams1101 2 жыл бұрын
Ebay
@deaconstevej1 6 жыл бұрын
I have a 2011 BMW 335i Msport convertible! How much for a set?
@tomcampbell5186 5 жыл бұрын
$140
@elbarbu5097 5 жыл бұрын
That shit cost 20 dollars on eBay nigga said 140
@tommyarmour68 5 жыл бұрын
I bought mine for 12 dollars on ebay. I havn't installed them yet. Since I have a pair of more spendy ones. But these look better. I don't want to use glue. So I'm tryin to figure out a way to use magnets instead.
@cal79 4 жыл бұрын
Fk off puttin them on any car..r u mental
@bongofury5924 3 жыл бұрын
Sweet as a Rolexx........
@raficsalam5400 4 жыл бұрын
is it true that we sould not use plastic calipers because it melts from brake heat?
@FL4MEWITHA4 4 жыл бұрын
You can see when I made this video and I still have them on my car and brake calipers don't heat up only the pads do 👍🏻🔥
@raficsalam5400 4 жыл бұрын
@@FL4MEWITHA4 thank you👍
@tech1er829 4 жыл бұрын
Not on all cars ! !
@praetorian3959 2 жыл бұрын
Well… you would notice, a bleeding nipple is always UP.
@mattmuyres7720 3 жыл бұрын
what if you dont have that bar ??
@darwincollado8993 4 жыл бұрын
Covers are upside down Brake line is always at the bottom
@bongofury5924 3 жыл бұрын
You haven’t seen how he drives.....
@aljovidakidstv7425 6 жыл бұрын
I have a nissan g35 sedan. Is that kind of caliver can be fit to mine? I'm about to order in ebay if it fits. Thanks
@FL4MEWITHA4 6 жыл бұрын
michael decena should be fine - you may need to cut a little plastic 👍🏻
@aarondixon2896 2 жыл бұрын
You need to show more than the last 5 seconds of the installation process
@user-ix4eo2it4d 3 жыл бұрын
Can you send the link
@Pugsley270155 3 ай бұрын
The little bleed nipple should go at the top of the calliper.
@RAYHANGAMER 5 жыл бұрын
Does it fits in all cars i have 2012 toyota camry
@Jcboyy992 4 жыл бұрын
He is dead.rip
@singlanand Ай бұрын
What material is this cover? Plastic or metal?
@FL4MEWITHA4 Ай бұрын
Plastic 👍🏻🔥
@mccraejoey82 4 жыл бұрын
will these fit an Acura tl 2011
@FL4MEWITHA4 4 жыл бұрын
Maybe 👍🏻
@jin5632 6 жыл бұрын
If I glue them, then when I have to change brake pads, should I remove them?
@FL4MEWITHA4 6 жыл бұрын
jin5632 you shouldn’t need to do that as they should be glued to the part that slides off 👍🏻
@MrBlompod Жыл бұрын
It's like they're made for those calipers, what if you have different calipers? the glue I guess...
@FL4MEWITHA4 Жыл бұрын
They are universal 😁🔥
@adycrap 5 жыл бұрын
Hi can i do same on a4 b9?
@Neauxluh 3 жыл бұрын
Yes, eBay
@amauryperez9676 2 ай бұрын
I recommend to pay the caliper the same color of thw caliper cover to mahe it look better
@johnkavanaugh5931 4 жыл бұрын
Why...plus you have them on the wrong side. The bleeder needs to be facing up. At least try to make it look right. SMH👎
@MrArjanOskam 4 жыл бұрын
Can I still replace my brakepads? Or is that impossible this way?
@FL4MEWITHA4 4 жыл бұрын
Only attached to the carrier so yes 👍🏻🔥
@paulosanto84 2 жыл бұрын
Replace before glueing so at least you have it for sometime lol
@gasolineimagesinc.7133 5 жыл бұрын
Thanks for showing us how to install them upside down.
@FL4MEWITHA4 5 жыл бұрын
Gasoline Images Inc. lol you must have your device upside down 🙈 you couldn’t put them on any other way 😂
@gasolineimagesinc.7133 5 жыл бұрын
On real calipers of any kind, brake bleeders are always at the top. The need to be up top to purge air out of the lines. You have the simulated ones facing down. You have the passenger side on the driver's side and vice versa, hence them being upside down.
@Luckyboyee777 5 жыл бұрын
I think he's got you here. The bleeder screws are on top. It's OK people who recognize the bleeder screw is in the wrong spot probably will already know it's a fake Brembo before they even think about the screws lol
@ethanwildermuth6267 4 жыл бұрын
Please guys don’t do this it’s so easy to tell they are fake i saw some guy with these I shed a tear laughing so hard
@dadlifegarage2292 3 жыл бұрын
I wouldn't really care what other men think LMAO. 🏳️🌈
@treyon9190 3 жыл бұрын
Idgaf what somebody with no car thinks🤣
@azkal2ko Жыл бұрын
most instances it will not fit to the ones that your car has. Standard calipers covers comes with extended clip and hardware. I just receive ones that I ordered and I'm searching for how the hell I will fit these on thats why I ended up here.
@akura2 3 ай бұрын
I wish you had shown a close up of the clips before you put the covers on… or at least pointed them out better… I have a 2010 BMW E60 with slotted and drilled StopTech rotors front and rear… I got the light blue covers (white car/black 20” wheels). it should look awesome but I’m nervous about putting them on… I got the biggest they offered and mine came with hose clamps and tabs so they are different but technically these are all the same… would you mind contacting me about this… I need help… thx
@josephbibeau7045 3 жыл бұрын
We’re did you find them
@FL4MEWITHA4 3 жыл бұрын
eBay 😁👍🏻🔥
@KpopNiDontStop 4 жыл бұрын
Well I guess as tacky as these are when you find out they are false LOL there are definitely cars that these look real on.
@abang11582 3 жыл бұрын
Not every caliper design like this....mine different design...so cannot clip it as easy as this video...
@KEVIN-xd6qg 6 жыл бұрын
Is there any possibility to fall off while driving. Will the glue keeps it firm even water gets inside
@FL4MEWITHA4 6 жыл бұрын
kavishwara kavinda the callipers don’t get hot only the pads and disc - if you make sure the surface is clean and dry with a nice key for it to stick - then there is no reason for it to fall off 👍🏻
@KEVIN-xd6qg 6 жыл бұрын
FL4ME WITH A 4 I fixed it after watching your video. It came perfectly. Thank you
@FL4MEWITHA4 6 жыл бұрын
kavishwara kavinda excellent- I’m glad I could help 🔥
@joesipr 6 жыл бұрын
this can be removed? this can damaged the pads or something? btw look awsome but need hear if are they safe or not to install
@FL4MEWITHA4 6 жыл бұрын
Jose Caraballo mine are still going well and no accidents 👍🏻 so I would say you are all good to go
@alexanderelgrillogrillo7032 6 жыл бұрын
Reverse posicion jajaja
@sauldiazbarrigajr.9003 4 жыл бұрын
Is that a Volkswagen jetta or bora?
@FL4MEWITHA4 4 жыл бұрын
Saul Diazbarriga golf mk5
@timefliesFTW 4 жыл бұрын
Wouldnt the heat melt that shit? A serious question
@MaraudingMale 4 жыл бұрын
He said,"just like that." lol playboy.
Buddy's DIY
Рет қаралды 4 МЛН
Action C Mini
Рет қаралды 19 МЛН
ScrewsNutsAndBolts
Рет қаралды 320 М.
АРТУР ПИРОЖКОФФ
Рет қаралды 398 М.
Мотомалышка Алина
Рет қаралды 6 МЛН
agro_fermer116
Рет қаралды 1,3 МЛН