How to install Conventional Manual Call Point
Рет қаралды 58,778
3 жыл бұрынthis video shows how to wire a Conventional Manual Call Point to the conventional fire alarm system panel.(AW-CMC2166-6)
More details:
asenware.com/products/detail-...
Conventional manual call point is designed to be use with an intelligent two-wire control system. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire
alarm control system which will, after receiving the alarm signal, display the equipment status of the manual fire call points.
Welcome to inquiry us
Email: info@asenware.com
Tel: 0086 13922805301
@twahashearer8302 3 жыл бұрын
This is a good demonstration, please provide more video clips for installation of this product
@ASENWARE 3 жыл бұрын
thank you for your support,will do more for technical support also
@ronelomingoy8320 3 жыл бұрын
Thank's. More demo videos pls.. dip switch setting how it works? Thanks.
@ASENWARE 3 жыл бұрын
thank you for your support,if your manual call point it's the last one device in the zone ,you could check our video from 4:34 to 5:20 to learn how to set the dip switch,or You can contact us through sales03@asenware.com
@alexandermokele7076 2 жыл бұрын
Nice one
@ASENWARE 2 жыл бұрын
Thank you for your support
@nonamefornow1465 3 жыл бұрын
Helpful. Good job
@ASENWARE 3 жыл бұрын
Thanks for your support
@francispascua9861 2 жыл бұрын
What best remedy if the IC in facp is broken, can I replace the IC OR I will get another new fire alarm control panel?
@ASENWARE 2 жыл бұрын
Can you share with me the model number of the panel ? Kindly share with us the product picture or video to info@asenware.com ,we have professional engineer can give you solution.
@princessroseeugenio5679 Жыл бұрын
If the mcp is the beginning ..we don't need to remove the jumper in eol??
@ASENWARE Жыл бұрын
Thank you for your support,If you have any technical problems, please feel free to contact us, E-mail: info@asenware.com Whatsapp/Wechat/Skype: 8613922805301. web:asenwarefire.com
@khaledawadh-vj3xn 2 ай бұрын
What will happen if we share the 6 and 2 terminals in every smoke detectors?
@ASENWARE 2 ай бұрын
Hi dear, kindly see this wiring method for AW-CSD381-Conventional Smoke Detector: Wire connection point: No.2: IN + ( zone input + ) No.6: Remote indicator(+) / Next detector IN (+) No.5: IN - ( zone input - ) No.3: Remote indicator(-).
@ASENWARE 2 ай бұрын
Welcome to contact us for more information: asenwarefire.com Email: info@asenware.com Whatsapp, Wechat, Tel: 0086 13922805301
@kevin00861 7 ай бұрын
How long can we extend the signal wire ?
@ASENWARE 7 ай бұрын
Thank you for your watching and if you have any questions please send an Email to info@asenware.com. Our technical team will serve you.
ASENWARE - Only for Fire Safety
Рет қаралды 21 М.
QAZSPORT TV / ҚАЗСПОРТ TV
Рет қаралды 621 М.
Apollo Fire Detectors - How To!
Рет қаралды 51 М.
Lheoda Dj Tech Tv
Рет қаралды 15 М.
Himmax Electronics Corporation
Рет қаралды 116 М.
ASENWARE - Only for Fire Safety
Рет қаралды 24 М.
junrey eguna
Рет қаралды 25 М.
ASENWARE - Only for Fire Safety
Рет қаралды 205 М.
Brother-live_mob
Рет қаралды 554 М.
i-shoppers обзоры
Рет қаралды 2,1 МЛН
Павел Хмурчик
Рет қаралды 769 М.