How To Install Electric One Touch MulchControl™

No video

How To Install Electric One Touch MulchControl™ | John Deere

Рет қаралды 86,851

5 жыл бұрын

On your Accel Deep mower deck, you can use a John Deere MulchControl™ kit to make sure your lawn looks perfectly groomed. Today, we will show you how to install the Electric One Touch mulchcontrol kit on your mower. The Electric One Touch MulchControl kit is available on X300 and X500 Select Series Accel Deep Mower Decks. Visit your dealer to understand mower compatibility or buy your kit here: shop.deere.com...
✅ Subscribe for more John Deere videos: bit.ly/2Yo9Oad
-- Follow Us --
TWITTER: / johndeere
FACEBOOK: / johndeereusca
INSTAGRAM: / johndeere
LINKEDIN: / john-deere
-- More from John Deere --
Find a Dealer: bit.ly/2l8PivS
Visit our Website: www.deere.com
#JohnDeere #LawnTractor #HowTo #Maintenance

Пікірлер: 29

@vbdino 4 жыл бұрын

On a x380, a 20amp fuse on position C3 is required to provide 12v to the red wire of the source power for the kit while the yellow wire provides 12v when the main switch is on. The fuse is located in the fuse box.

@kurtb6126 4 жыл бұрын

Hi Richard Turcotte. I’m going to install this on my X380. Is there no fuse in C3 to begin with? I haven’t run out there to take a look yet. Thanks!

@vbdino 4 жыл бұрын

Kurt B , on mine there was one but was broken. It provides 12v on the red wire where you plug in the actuator harness. The yellow wire has 12v when the key switch is turn on. The red wire is hot all the time.

@vbdino 4 жыл бұрын

If you also have a powerflow, place the actuator support plate on top of the powerflow black support plate for better fit. And you may have to adjust for correct operation of the door by moving the actuator plate. There is some light movement possible before tightening the 2 bolts.

@leonmurphey3968 3 ай бұрын

Great job thanks😊

@buxka2 Жыл бұрын

Looks like it blocks a lot of the chute opening even when not engaged. Maybe that is simply because the adapters narrow the chute but also change the whole deck flow.

@crashwrench 3 жыл бұрын

Hi , No ! First Thing Is To Clean the Underside of the Deck ! Use " Blue " Locktite Thread Locker On All Fasteners . ( To keep from rattling loose ! ) . Re- Check Deck / Blade LEVEL ! After Re-installing The DECK . Check the Door / Gate Opens and closes Moves freely ! ( Also Check Every so often , so You Do Not Burn - OUT The Actuator / Motor $$$$$$ ) !!!!

@chloe5susan Жыл бұрын

What size of fuse runs the arm to open and close??

@hippielewis4768 Жыл бұрын

Like to have one but too costly

@kendallrodgers6123 3 жыл бұрын

The one touch kit I ordered for 48 inch deep acel deck the gate does not close all the way. Did the send me wrong kit? I have John Deere x570 with 48 inch deep acel deck

@JohnDeere 3 жыл бұрын

Kendall, if you have any issues or questions about the installation of your 48A electric one-touch MulchControl™ attachment we recommend reaching out to your local dealer for assistance. If needed, you can find the contact information for your closest John Deere dealer at dealerlocator.deere.com.

@chloe5susan Жыл бұрын

Kendall what was wrong with yours. Have same issues today!

@jayss10 Жыл бұрын

@@chloe5susan I have one on my X570 (54 inch deck) and while it was mostly right some of the brackets needed small tweaks to fit my deck properly and clear the blades. In your case I'll bet you have the actuator bracket attached wrong.

@robluc86 2 жыл бұрын

My mulch control switch is operating opposite of what it should. When I switch it to open it closes and when I switch close it opens. What is wrong?

@JohnDeere 2 жыл бұрын

AL, we're sorry to hear that you have been experiencing issues with your mulch control switch. If you haven't already you may want to take a look through the Operator's Manual of your unit. Towards the back there is a "Troubleshooting" section that may help. Many Operator's Manuals are available online, so you may be able to access the manual for your model at techpubs.deere.com. You can also contact your local dealer for further assistance. Find their contact information at Deere.com/Dealer. We hope this helps.

@traildog47 Жыл бұрын

Pity there is no link to the part number, :(

@dennisb57 3 жыл бұрын

Do you have a video for the X350 42-in. (107-cm) Accel Deep electric one-touch MulchControl

@dennisb57 3 жыл бұрын

Do you have a Video for install the 42-in. (107-cm) Accel Deep electric one-touch MulchControl on a X350

@JohnDeere 3 жыл бұрын

Thanks for your interest, Dennis. We have videos on the installation of the One Touch MulchControl™ kit on our KZfaq channel here: bit.ly/38ohsIq. If needed, we recommend contacting your local dealer for further assistance. You can find your dealer's contact information at dealerlocator.deere.com. We hope this helps!

@albertsanchez8007 3 жыл бұрын

Is the mulching system compatible with the blower for the bagging system?

@JohnDeere 3 жыл бұрын

Albert, thanks for reaching out. Your local John Deere dealer is your best resource for attachments and compatibility questions like this one. You can find your closest dealer at Deere.com/Dealer.

@daviclar867 3 жыл бұрын

What's the spec numbers you forgot to say in this vid. "Tighten nuts to spec with using a torq wrench."

@JohnDeere 3 жыл бұрын

Thanks for asking, Davi. The torque for the Mulch Gate Stop Plate is 20 N·m (15 lb·ft). This information and other specifications can be found in the Operator's Manual for the MulchControl™ Kit which is available online here: bit.ly/3DcFK6a. We hope this helps!

@kylehendrickson8527 4 жыл бұрын

Will this work for a Z920A?

@mikehornsby599 5 жыл бұрын

I wonder if one is made for a z920

@JohnDeere 5 жыл бұрын

Thanks for your question, Mike. This Electric One Touch MulchControl™ kit is available on X300 and X500 Select Series Accel Deep Mower Decks. The Z920M ZTrak™ Zero-Turn Mower is available with a Mulch On Demand™ deck, which can switch between side discharge and mulching operation with the flip of a lever as the operator mows. You can learn more about the Z920M and the Mulch On Demand™ deck on the product page here: bit.ly/2Yz4BzB.

@kylehendrickson8527 4 жыл бұрын

@@JohnDeere Is there anyway to get a "mulch on demand" option for a z920a 60-inch?

@JohnDeere 4 жыл бұрын

Hi Kyle, this Electric One Touch MulchControl™ kit would not be compatible with your Z920A. We recommend reaching out to your local John Deere dealer to see what mulching options would be available for your mower. If needed, you can find their contact information here: bit.ly/2zIdfB5.