How To Install Fishmaster Pro Series T-Top

No video

How To Install Fishmaster Pro Series T-Top

Рет қаралды 48,468

Күн бұрын

You've purchase a Fishmaster Pro Series T-Top, now what? Watch along as we walk you through the installation process.
Shop now: bit.ly/2Etnace
Be sure to subscribe to our channel and follow us on social media to stay in the know!
Facebook: / fishmasterinc
Instagram: / fishmasterinc
#fishmaster #centerconsole #ttop

Пікірлер: 7

@xlrationmarine 5 жыл бұрын

So, how do you get a rod in the console rod holder with no hole in the T Top canvas???

@cajunfamily5227 4 жыл бұрын

sol

@jonnyboy513 6 жыл бұрын

Radio box, rod holders or antenna mount available for the “pro series”?

@user-xo7oe3qi9c Жыл бұрын

I am wondering if the top portion of the t-top can fold back towards the motor, I ? need it to fold backwards so I can fit it into my garage. Is this possible

@jtalley989 2 жыл бұрын

So how about a video showing the 2 fold part?

@flash521 3 жыл бұрын

I just installed mine. The frame does not perfectly align. For example, the top does not simply lay into the cradle holds. You can adjust it this way, or that wya, it just doesn’t align. The engineering is off and will have to be screwed in place by pulling them down from being in a slightly cockeyed into tight position. This puts stress on the frame on the bottom and top, while I hope it will hold. Sincerely, this could be more precision engineered for the price. Nice looking T-Top, however, this not a butter the bread job because of some the misalignments and the adjustments you will have do for the lower to force match with the higher. I didn’t appreciate these manufacturing surprises since you expect things to fit perfectly. We will see . . .

@flash521 3 жыл бұрын

@@Farmer2492 How would you know that? In fact, I took a photograph of the misalignment of the first sent top section parts to me which visually showed how serious the problem is. FishMaster sent me new ones. I appreciate this and they paid the shipping. The replacement, however, was hardly any better! ! I had to force them to fit. We are not talking a little force. One of the bottom foot of the leaning posts were not sit square with a flat floor. So it is not square when installed either leaving one screw not fully seated. May I add on the first order, several parts were missing. Not one or two, rather several. There were so many problems on both the original and second sending I cannot possibly believe I am the ONLY person this has happened to, nor these major parts are the only one's ever that misaligned. People ought to be aware of it. The T-Top is on the boat and looks good and to screw things together with those "fast release knobs" requires some effort due to misalignment.