How To Install Giannelli Rekord Exhaust And Malossi Rollers
Рет қаралды 13,014
Күн бұрынDo you know how to mount a Giannelli Rekord Exhaust on Aprilia SR 50R
Watch the video till the end and tell us what you think about the sound and performance of this setup in comment section below!
For more videos like this, like, share and subscribe!!
🔥Stay tuned!
All rights reserved.
This video does not include any paid promotion.
DISCLAIMER
This video is only for information purposes. I cannot guarantee against any kind of use of this information. SomethingOfEverything assumes no liability for any damage or injury caused as a result of any of the information contained in this video. Use this information at your own risk. SOE recommends ONLY safe practices when working anyhow and or with tools. No information contained in this video would create any expressed or tacit warranty or guarantee of any result. Any injury, damage or loss that may result from the use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user itself.
@and_rew9768 6 ай бұрын
A good job, fantastic sound with Giannelli 👏💪👋
@businessmn496 3 жыл бұрын
I think I am gonna change my standard exhaust after watching this video. Nice tutorial bro ツ
@somethingofeverything4646 3 жыл бұрын
Thanks man :)
@somethingofeverything4646 3 жыл бұрын
If you need any advice feel free to ask
@businessmn496 3 жыл бұрын
@@somethingofeverything4646 Tnx!
@LulePetrovic Жыл бұрын
If i put just exhaust and remove electronic block, without rollers and variator blocker will it be better than stock
@somethingofeverything4646 Жыл бұрын
Which model do you have? Which year is it ?
@LulePetrovic 2 жыл бұрын
Did you remove some type of restrictor in giannelli rekord exhaust
@somethingofeverything4646 2 жыл бұрын
No this exhaust doesn't have any restrictors. Maybe some of them have one because they are made for different countries.
@Staehle Жыл бұрын
Was würdest du sagen ist der Rekord deutlich lauter als der originale? Weist du was du alles zum abstimmen geändert hast? Welche Kupplungs Federn, Vario Gewichte hast ja 4.7 rein gemacht (was war Orginal verbaut) und vergaser Düse
@somethingofeverything4646 Жыл бұрын
Alles ist serienmäßig ... die Federn und die Kupplung sind serienmäßig. Auch der Variator ist serienmäßig. Ich habe nur den Auspuff und die Rollen geändert, die 4,7 Gramm wiegen
@Staehle Жыл бұрын
@@somethingofeverything4646 und wie ist’s mit der Lautstärke im Gegensatz zum Orginal Auspuff?
@LulePetrovic 2 жыл бұрын
Do you make oil gas mixture or it has mixer.
@somethingofeverything4646 2 жыл бұрын
It has an oil pump. Im changing the pump every 12 000 km with a new one
@jepajes 2 жыл бұрын
what is normal weight of aprillia sr 50 2016 rollers?
@somethingofeverything4646 2 жыл бұрын
Standard weight of Aprillia SR 50 Rollers should be 6.5 grams.
@jenny-masterchef 3 жыл бұрын
How about rejet carb?Whats topspeed now?i had extra v2 with lower power.i have factory r ditech has a better subframe no need to cut nothing.
@somethingofeverything4646 3 жыл бұрын
No need to rejet the carb on this 08 model... its 2 times faster than the newer models so i guess the carb is with bigger jets from factory.the top speed is 95 km/h
@jenny-masterchef 3 жыл бұрын
@@somethingofeverything4646 it has nothing to do with which year come from.all piaggio engines set up the same sinds 05 only the latest eu4 are different.topspeed gps or tacho cuz analog read wrong.mine is did 92.
@somethingofeverything4646 3 жыл бұрын
Which one do you have ?
@somethingofeverything4646 3 жыл бұрын
@@jenny-masterchef probably the electronics is different on latest models
@jenny-masterchef 3 жыл бұрын
@@somethingofeverything4646 extra v2 with naraku 70 cc.terrible cheap exhaust and cyl also not recommended.i did use multivar with 5.0+5.5 gr weights mixed.best pwr @9500 rpm.my bike is from 05.
@LulePetrovic 2 жыл бұрын
One more question. How is this variator block model called?
@somethingofeverything4646 2 жыл бұрын
Variator locking tool.Just search it on ebay or maybe google it. Im sure you will find it
@LulePetrovic 2 жыл бұрын
@@somethingofeverything4646 thankz, what is it used for? Do i need this or it doesnt matter
@somethingofeverything4646 2 жыл бұрын
You need this so you can dismount the variator. It blocks the crank so you can unscrew the nut
@juicy1 2 жыл бұрын
@@LulePetrovic you can also use those impact drill things
@somethingofeverything4646 2 жыл бұрын
Sure you can do that also
@rogvireynstind5555 Жыл бұрын
What type of aprilia sr 50 is that?. Karborator, minarelli?
@somethingofeverything4646 Жыл бұрын
Yes
@somethingofeverything4646 Жыл бұрын
But piaggio engine
BiWiS | BiWiS shop
Рет қаралды 7 М.
INGENIERIA CON VICTOR SILVA
Рет қаралды 6
Scooter Street
Рет қаралды 271 М.
ScooterProSports
Рет қаралды 161 М.
Two cars met in a narrow lane on a rainy day and could not meet, The female driver behaved like this
One Day 2.0 Extra
Рет қаралды 2,4 МЛН
Autograf
Рет қаралды 7 МЛН
НОВОСТНИЧОК
Рет қаралды 971 М.