Λεοναρντ Τζαφαι thank you for this nice comment

Enjoy dear :)😀

Bucataru Bogdan Puiu 0034632656303

do you know who fix the windows line?

You are very welcome

Welcome dear

thank you very much , i search for you case but at the moment i couldn't find helpful thing , but in the case of the light you can check one wire by wire , start with giving them negative trigger , by using a tool like a tester with needle head connect one end on the car ground and the other end with the needle head try to press the needle head on the wire to fine the lighting wire , note ;;;; that only signal light is on the central lock socket . if you didnt find it try with positive trigger , which you connect the one end in positive

Fleky Flek hi dear , iam not sure ,but you can open the door panel and see as well as , try to give the pin 4 and 24 a negtive puls so you will be sure that it is same if not , contact in my Instagram so i will check the wiring digram

it works i already did

kerlos alaboshe hi bro yes I can , sorry for the late reply. do you still need the help

Emmanouil Chatzisavvas hi i will upload video soon about doing that , thank you very much for the comment

Thank you for your quick response. If you could tell me where I could search and find an input for triggering the turning lights, I could also look help you with this. I owe a SKODA FABIA 2001 with built in central lock but not a keyless one. The drivers door is very similar to the one you work with in this video.

Your most welcome 😘

you mean so that the signal light will flash ??

Yes i mean that. Thanks

Did you found the way? Searching for it right now

I was giving the negative pulse using a test lamp , I connected to the car ground , my test lamp has a needle in the front so i press it the wire .

I had the same problem, take the ground from somewhere else than the door bolt.

b S! hi , yes all the work is on the door no need to go any where dear .

Salman Almahal thank you very much bro! I really appreciate your time in putting this video here and answering people questions , it's very kind of of you . by the way اني عربي مثلك 😊 تحياتي لك يا طيب !

العفو وحياك الله --من وين الاخ ؟

Salman Almahal اني من العراق بغداد لكن مقيم في بريطانية حالياً . حياك الله يا طيب!

Hi sorry for the late replay , what kind of problem you are having??

masoud soleymani hi , negtive trigger mean that the wire is giving negtive puls if you give it sginal to activate

Bence Bors brother can you tell me in which minutes you have the problem

Salman Almahal A bowl opening and closing button does it. Who opens the door. But I can not close it.

hi sorry for the late replay, you have one option to find the locking wire , the option is .... to use any wire one end on the car ground and the other end with needle head , then try to put the needle head to all the wire in the central lock wire , needle head can be as tester as i use . so when you reach the correct wire you will see the car locking .

Did you manage to find out which was the correct pin? Im having the same problem as you. And als ok have the same colour wires.

Did you found it?

one in pin 4 and the other in pin 24 , in the connector there are number , if you find the pins give them negative pulse so you will know which one lock and which one unlock . negative pulse mean you take a wire and connect one to the ground of the car and the other one to the wire which pin 4 and 24 is connected to . the connector should be fixed to the unit , you can do that either you scratch the wire or connect the negative wire with a needle and press the needle to the wire .

Salman Almahal thank you for answering, i've done it it works thank youu

your welcome and i am sorry for the late reply

Salman Almahal it's nothing, you very helped me

Okolobielu Ifeanyi hi ,chat with me in my Instagram ..salmanalmahal..

Salman Almahal my car unlocks but want lock

yes I didn't do them

yes I didn't do them , next video I will upload

@@salmanhassan2847 Did you?

Hi peter , did you try to give pin 4 and 24 directly negative pulse ?

+Salman Almahal Thanks, I have solved the problem.

+Peter Key what was it ??

Hi Peter, I'm running into the same problem now, it unlucks but does not lock. How did you solve this? Thnx for you reply. Jan.

Peter Key how did you fix this? im having same issue..

Internet

Did you try to give it directly negative puls to pin 4 and 24 ?

Chingis Akhmedov 25 can’t too. Can lock but not in lock

لانه العرب قليل يستخدمو هل نوع من السيارات

العالم كتاب مفتوح هههههههه مزبوط

Please check if the device is working properly

@@salmanalmahal5373 it is clicking when i press the buttons