How to Install LEVOLOR Custom Cellular Shades

No video

How to Install LEVOLOR Custom Cellular Shades - Outside Mount

Рет қаралды 46,909

Күн бұрын

Installing your *custom cellular shades (available in cordless and continuous cord loop lift control) is made easy with our helpful step-by-step guide. We’ll walk you through everything you need to increase light control and privacy with outside mounting and get you ready to enjoy your LEVOLOR shades today, tomorrow, and every day.
For more information, go to www.LEVOLOR.com...
Subscribe to our KZfaq Channel for more helpful tips and offerings from LEVOLOR: / @levolorblindsandshades
Connect with us on social media:
Facebook - / levolor
Instagram - / levolor
Twitter - / levolor
Pinterest - / levolor

Пікірлер: 7

@mikejanus8799 3 жыл бұрын

The outside mount instructions booklet p.11 indicate "Allow a minimum of 1/4" between the bottom of the installation bracket and the top of the window" The video shows installer marking the bracket holes while the bracket is flush on the top of the window molding. The next video frame shows the brackets installed properly with the brackets mounted approximately 1/4" - 1/2" above the top molding . If the brackets are installed improperly it might interfere with trying to remove the shade after installation.

@kirstennewland6822 3 жыл бұрын

How the heck do you get the top hand of this bracket to “let go” of the channel that it snapped into when you pushed it against the spring clip in the back of the bracket? I have released the back springs with a flat head screwdriver, but this header will not be released from the top claws.

@MrWingwe 2 жыл бұрын

The manual (Celluar Shades , c 2019, p. 13) also states "IMPORTANT: Use drywall anchors when mounting into drywall" . In this video the installation surface is drywall, but anchors are not installed.

@rski1036 Жыл бұрын

PATHETIC how a Levolor rep does not respond to customer issues here.

@happydays0220 2 жыл бұрын

Enjoy shades

@stanhaavik5145 2 жыл бұрын

None of this works for me. I've installed the brackets with the 1/4" gap from frame.. The shades would not go into the three brackets. What is shown in the video to a simple twist and click motion. That didn't work for me and on two of four attempts the shade came crashing to the floor as it slipped my grip.. Then I added spacers between bracket and wall to bring the bracket farther from the frame. I thought this would enable the desired rotation and click. No way did that work either. This arrangement does not work.