Here is a link to the kit I purchased - OEM GM LED Bed Light Kit - GM Part # 23199878 : amzn.to/3lgNqfc And here's a link to a handy 7mm ratcheting wrench: amzn.to/3eSaH5T​

I could not have completed my lighting kit without this video. Installed a set in both my truck and my son's. Thanks for posting. Also, I can confirm the kit fits 2019 Chevy Colorado (LT & WT) perfectly.

Awesome description! Pretty straightforward, but watching you do it and how you explained it made it really easy. I had no idea that the open factory connector was under there. My biggest fear was grabbing power and splicing wires somewhere. Thanks a lot!

Great video! Thank you for posting - after watching I had the confidence to buy and install on my Colorado in under an hour! They are definitely bright enough to see everything in the bed at night with the tonneau cover rolled down.

Great video, my 22 Canyon AT4 has that bed lightning acessosory connector. Looking forward toward installation. Thanks for sharing the knowledge!!!

Used this video to do the same install on my 2019 Colorado Z71 tonight. Thank you!

Great video and thanks for making it. Helped my install immensely. Only disappointment is that the lights don’t have more light output. Slick setup tho!👍

This video is a godsend, thanks for making it!

Thank you for making this video! I just installed my bed lights, I first tried to follow GM's instructions and remove the driver tail light. I had a heck of a time getting the driver side tail light out and gave up then just did it the way you showed. I think it'd be nice to be able to zip tie the harness to the tail light structure as shown in the GM instructions but it's not worth it, getting the tail lights out is a royal pain. I dread if I ever need to replace a tail light bulb in the winter, all kinds of plastic is going to get broken pulling those tail light assemblies out :(

Does anyone know if you can buy those clip in nuts and the wiring harness connector by itself? I have lights already.

It might be fun and useful to add a single led light to the bumper steps to light up where to put your foot when the bed lights are on.

Very nice information for the bed light kit. However we can learn from your possible mistake, of using the wrong light on the wrong side. If you had put the lights in their proper place, you would not have had the connections towards the front! That is how I’ve seen them installed as a factory option. As for passing the harness over to the other side, if there’s enough slack, I’d pass it through that big round bar that’s part of the trailer hitch, then seal the ends to keep water an debris out!

I did cheep bed lights .Harbor Freight Stick on led lights 1.5 yrs ago, Still on the 3x aaa Lithium batts [ the wall switch like light ....] One has fixed light,and the other adjustable.

Didn’t know this was an option! I zip tied a light bar to my tonneau cover frame. This is a much better solution. Thanks!!

Just ordered myself some ❤

Awesome video. I was wondering what that plug was for!

Excellent vid. Mucho brighterr

Also is there a spot to hang the lights deeper into the bed towards the front? I want to brighten the front more.

Once installed did these lights turn on when you press the button in the cab that turns on the cab brake light?

Easy install. More than one way to skin a cat. Great video 😊

Hello. What did you use for brackets for your tonneau cover? Having same problem with mine

Hi, nice video. I called the parts department at our local GM dealership and gave them the part number you listed. That part number is for 2016 and up. My truck is a 2015 and the parts guy said it wasn’t a factory option in my truck year. Maybe the wiring harness could be modified to work, but I would have to special order it as it’s not a stock item. Not sure I want to take the chance at spending $130. Maybe you know if it might work?

How do you tighten the screws

Can you tell me if the connector that goes to the light is only two wires, + and - ? If so I would remove the connector and use it to power LED strips. Thanks

How would they work with 2 swing boxes?

Great video! I clicked on the link for the lights on amazon for my 2018 Canyon. However, when I looked at the lights Amazon says it’s not compatible. Are you sure about the parts number? Just curious. Thanks

Is there no way to make it so you can switch on/off from the back?

Thanks, was about to install led strips and noticed the wiring harness you connected to. I don't wanna spent 130 for a few less so i wanna hook up the led strips to that wire harness. Any idea what that wire harness type is called? Searching myself silly on acdelco....

Have you ever changed the spark plugs on your Canyon or the Colorado?