How to install polycarbonate roofing onto a timber framework to make a carport, This video shows the step by step instructions using the Hawk glazing bar system from C & A Building Plastics.
Пікірлер: 38
@jimprior1807624 жыл бұрын
Thanks for posting this video. Well, regardless of some comments on here I found it very useful and clear to understand how everything fits together and the various parts and accessories I need to do the job. I also found the comments people made (good and bad) were useful tips about issues you come across. Thanks to all.
@carolezaraco52426 жыл бұрын
Can you add a rain gutter to polycarbonate pergola roof?
@Name2608123 жыл бұрын
Can we add sides to this patio cover?
@lauraderga98905 жыл бұрын
What program is this animation created in?
@user-kp4gr4ds4m Жыл бұрын
How do you place the wall flashing along the back?
@starphlo12333 жыл бұрын
Where can I get this in the U.S?
@AlexSkorohodov2 жыл бұрын
Do you have a distributor or installers her in the US?
@donovanlucero3806 жыл бұрын
I'm interested in installing this system in the US but I see you are a British company. Any suppliers in the US that I could purchase the channel kit from? Thanks.
@CandABuildingProducts6 жыл бұрын
Donovan Lucero Hi thank you for the message. Unfortunately these are not exported to the US. There are however similar systems over there and we wish you all the best for your project.
@MsDaisy-xd1xy4 жыл бұрын
Para po be etu sa flat rooof?
@KennyEvansUK3 жыл бұрын
Where can I buy this floating drill to screw down the sheets?
@yorweth17 жыл бұрын
how far apart do the intermediary bars have to be ? I am building a 5 mtr span and intended puting 3 intermediary supports at 125 cm apart. any one know ?
@CandABuildingProducts7 жыл бұрын
yorweth1 please call our sales who can help you on 01634 374444
@zigmasbirbalas81194 жыл бұрын
9 .
@rasrasmetalandaluminumengi50572 жыл бұрын
Yes I give thanks
@_Piers_8 жыл бұрын
You really need to add some sound to this, KZfaq has a library if royalty free music you can use.
@TRPGpilot4 жыл бұрын
Short attention span? . . .
@lewisnicholson31522 жыл бұрын
shup Piers it's not a music video.
@johncole58998 жыл бұрын
It is most important to leave an expansion gap between the sheets of at least 10mm. Its best to remove protective film before the top capping goes on. Also don't overtighten the fixings. A slick presentation but not of much value.
@matthewl.50855 жыл бұрын
What is the expansion gap for? Need to know for my exam. Thank you!
@user-kp4gr4ds4m Жыл бұрын
Hi question, how do you place the wall flashing along the back when panels are already installed?
@silviofontana36664 жыл бұрын
fittings are just tooooo expensive
@james-jq8sk4 жыл бұрын
Agree way too expensive, (some systems have a one piece joiner, instead of 2 piece, cheaper), buy off the shelf aluminium extrusions from Bunnings to join together...
@danieljsimpkins6 жыл бұрын
This is really misleading, it's actually wrong. You need to fully install each section of roofing at a time otherwise there will be loads of bits you cannot reach without climbing on the roof, for example how are you supposed to fit the flash band once the roofing sheets are installed? Rubbish!
@CandABuildingProducts6 жыл бұрын
Daniel Simpkins Yes it is normal to have to get onto the roof for sealing it. If you are worried that the roof is not strong enough to take your weight, it most likely means you should have used thicker timbers. People forget that it needs to take snow and wind loading as well.
@CandABuildingProducts2 жыл бұрын
@Jan parchanski roofs are supposed to be built string enough to get on. You have to use crawling boards to spread the weight to avoid point loads, but you are supposed to be able to get above the roof.
@Captain-Buzzsaw2 жыл бұрын
@@CandABuildingProducts if they can't work out you need crawl boards to spread the weight, then clearly they ain't intelligent enough to start the job. No probs with the vid at all.