How to Install Power Locks in Nissan Hardbody D21

Рет қаралды 49,409

Күн бұрын

Today we are installing power locks on Bryan's Nissan Hardbody D21!
The power lock kit we used: amzn.to/3eyNQeZ (Affiliate)
Alternate Kit to try: amzn.to/3fqmrwe (Affiliate)
Trim removal kit: amzn.to/2I2rPYI (Affiliate)
Just like we did on the Mazda, we've now installed power locks on the Hardbody! Check out this guide on how to add them to your Nissan. Super easy and a mod definitely worth doing!
I'm going to be showing you exactly where I placed the actuators inside the doors clearing all moving parts and glass. I also show you how to route your wiring and where I installed my central lock unit to control everything.
Some tools you will need are going to be:
Phillips screwdriver, Drill, 1/8 Drill bit, Electrical tape, Zip Ties, Blue Loctite
→ Support the channel here: www.flakegarage.com
→ Follow us on Instagram: / flakegarage
→ As an Amazon Associate I earn from qualifying purchases.
→ Check my Amazon page: www.amazon.com/shop/flakegarage
Disclaimer:
Due to factors beyond the control of Flake Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Flake Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Flake Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Flake Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Flake Garage.
Intro (0:00)
Parts in Kit (0:42)
Removing Door Panels (1:24)
Planning Actuator Location (3:09)
Drill Location (4:07)
Lock Mechanism Hardware (4:56)
Wiring Harness Trimming (5:30)
Control Box Location (7:29)
Wiring Routing (8:25)
Power & Ground Location (9:49)
Testing Lock Unit (10:41)
Review (11:21)
Final Thoughts (13:13)
Bloopers (14:45)
#nissan #hardbody #powerlocks #d21 #nissanhardbody #nissand21 #hardbodypowerlocks #d21powerlocks #powerlockinstall #howtoinstallpowerlocks #flakegarage #flakegaragehardbody #flakegarageinstall #install #powerlocks #minitruckin

Пікірлер: 95

@imnotbored Жыл бұрын

I found the wire that will make the lights flash. It’s a Pink wire with a Blue stripe behind the steering wheel.

@p.o.9964 3 жыл бұрын

Yeah I need this for my HB. Thank you for posting this tutorial.

@FlakeGarage 3 жыл бұрын

How it helps you install go smooth

@rogerd8121 3 жыл бұрын

That’s a clean installation bro awesome!!!!

@FlakeGarage 3 жыл бұрын

Thanks bro!

@micahwfmh 2 жыл бұрын

Good video worth the watch

@dannycaminero1630 3 жыл бұрын

Nice loved the video 👍👍

@terribleart6269 3 жыл бұрын

Awesome Video! Looking forward to the part two when you finish wiring everything up to the lights! Also, maybe integrate a kill switch into the wiring system?

@FlakeGarage 3 жыл бұрын

We definitely want to add a kill switch but I don’t think we’ll show it for security reasons. Chris fix has a great video on kill switches

@corsairmotorwerks547 2 жыл бұрын

Nice! I just inherited my grandfathers 1990 single cab RWD. You guys have all the good ideas!

@FlakeGarage 2 жыл бұрын

Awesome to see the mini truck staying in the family

@hehunches Жыл бұрын

you will need to put in MRJim1's TC tensioner keep that timing chain in tip top shape, many a KA has fallen to unaware owners neglecting chain start up rattle don't ignore it I beg you I love regular cab 1990 hardbodys please preserve it kzfaq.info/get/bejne/bsl6lNBjqrLXhJc.html

@JonathanGomez-kx6xh 3 жыл бұрын

Chingon 👍 new subscriber thanks for sharing this video ✌🏼.

@FlakeGarage 3 жыл бұрын

Gracias!

@jimmywilliams866 3 жыл бұрын

Nice. Great job.

@FlakeGarage 3 жыл бұрын

Thank you!

@knaoki6384 3 жыл бұрын

左ハンドルのハードボディがうらやましい❗️カッコいい👍

@FlakeGarage 3 жыл бұрын

どうもありがとうございました！

@aleksanderwrx7073 3 жыл бұрын

🔥 content

@hiddenrootss 3 жыл бұрын

Nice video,thinking about doing this! Unlocking it manually is pissing me off lmao

@FlakeGarage 3 жыл бұрын

This mod is def worth it! Specially if you ride with a passenger. So annoying having to get in and reach to open the other door

@mrdanielson3436 3 жыл бұрын

Same ive locked my keys in once and I get annoyed because I have to open it and lock it manually lol

@sasha-leeshack8188 2 жыл бұрын

Powered windows next please!!

@jkss007 3 жыл бұрын

Dang i just did an alarm should of wait i could of done this ajaja nice set up n cheap👍🏼😀

@FlakeGarage 3 жыл бұрын

Can always knock it out on a weekend next time 👍😀

@toycelica185 3 жыл бұрын

🤙🏻

@blandlong9440 4 ай бұрын

What’s a good interior door lock switch to use?

@andrewwalcott4100 3 жыл бұрын

👍🏼

@thecoolkid9003 Жыл бұрын

Where do you guys find rims for the d21s

@limedime03 10 ай бұрын

I have an extended cab 03 S10 not a D21 but I’m sure this would work just the same, great job guys

@FlakeGarage 10 ай бұрын

Should work the same wire wise, you might just need to find a good location for all the actuators

@kroz123 3 жыл бұрын

nice install, one quick question, where did you get the steering wheel adapter? do you have the link. I like the fitment.

@FlakeGarage 3 жыл бұрын

We have a video for the install on the steering wheel. Check out the channel but these are the hub and quick release we used NRG Hub for Nissan Hardbody D21 amzn.to/31hApIH NRG Quick release amzn.to/3gTGGjr

@angusmcpherson 3 жыл бұрын

I guess i was hoping for a keyless door lock, because car thieves can jimmy the lock and gain entry. They didnt get my hardbody because they could not defeat the steering lock, but they still took the glove box contents and would have taken my stereo had it been newer.

@iankelvinlinsangan5289 Жыл бұрын

Hi sir do you have a tutorial on how to wire the manual switch button? many thanks! your video helps a lot

@FlakeGarage Жыл бұрын

Unfortunately we don’t have one yet since I haven’t been able to find a good switch for it

@mikeajel828 2 жыл бұрын

Thanks for the video. My door lock won’t open with my key. I think the lock mechanism is faulty somewhere. Will this power lock work with my locks or do I need to fix my lock mechanism first? Thank you 🙏

@FlakeGarage 2 жыл бұрын

You are better off fixing your mechanism first. It shouldn't be too difficult to do, most likely you might just need a new cylinder lock or some stuff plugged right. If the power runs out for any reason you have to use your key to open the door

@jogmas12 10 ай бұрын

Dude I got a 1986 d21 and the driver window won’t roll down. I know it needs a new regulator but I can’t get the window down to unscrew it from the regulator. What to do????

@betobernal6660 Жыл бұрын

Did you guys ever finish wiring to the lights.? If so, where can I see the video.? I just installed the same one on mine but I don’t know where to connect the wires for the lights.

@FlakeGarage Жыл бұрын

We kind of did but we haven't taken a video of the process. You have to tap into a wire in the steering column

@abbprrodriguez744 Жыл бұрын

Nice Mr smoke buddy keychain 😂😂😂😂😂

@goatsonboats7875 Жыл бұрын

Did you ever wire in the lock and unlock light, if so did you ever get a video of it

@FlakeGarage Жыл бұрын

We did but we haven't done a video on the hardbody, you can see the one on the B2000 and it's a similar concept just a matter of finding the two wires on the hardbody that belong to the turn signals kzfaq.info/get/bejne/o7tdfs2KrdqUcpc.html

@cr7madrid7ac 3 жыл бұрын

For the switch, we’re you referring to a kill switch?

@FlakeGarage 3 жыл бұрын

I'm actually referring to a lock/unlock switch, you are able to add one to the system, we just haven't yet

@iankelvinlinsangan5289 2 жыл бұрын

Hi do you have a video on where to tap the blinker at turn signal? many thanks

@FlakeGarage 2 жыл бұрын

It's coming soon

@juanarroyo6686 2 жыл бұрын

Have a cuestion when u get the costant power from the stereo do the locks work only when the car is on

@FlakeGarage 2 жыл бұрын

Constant power means the power line is always hot or "on" so your locks will work whether the car is on or not

@juanarroyo6686 2 жыл бұрын

@@FlakeGarage well i install my on the wire from the stereo but only works whent the car is on

@FlakeGarage 2 жыл бұрын

Then that is not the constant power wire. I’d get a test light and check the wires when the truck is off to find the constant power wire.

@juanarroyo6686 2 жыл бұрын

@@FlakeGarage i find wire thats is light green- yellow and the back of the stereo has a sticker has light green-yellow strip = memory feed

@vincentgonzales8315 3 жыл бұрын

Can you still unlock it with the outside door locks?

@FlakeGarage 3 жыл бұрын

Yes you can still lock and unlock the door if the power locks fail for any reason

@Oscar-lo4fh 3 жыл бұрын

Nice im thinking of that, where u guys located

@FlakeGarage 3 жыл бұрын

We are based in Texas

@Oscar-lo4fh 3 жыл бұрын

@@FlakeGarage nice, is the wiring kinda the same for an alarm?

@FlakeGarage 3 жыл бұрын

It would be a similar style yeah but the alarm horn would need to be wired somewhere under the hood so you might want to pull power straight from the battery

@Oscar-lo4fh 3 жыл бұрын

@@FlakeGarage thanks for the info guys

@Oscar-lo4fh 3 жыл бұрын

By the way did u guys put those lock to be powered instead of manually

@STATIC_KA24 Жыл бұрын

Question will this kit also work with my 1993 nissan hardbody??

@FlakeGarage Жыл бұрын

Yes

@STATIC_KA24 Жыл бұрын

@@FlakeGarage thanks

@jovannycasarez5469 2 жыл бұрын

Can you plz post link for looks?

@FlakeGarage 2 жыл бұрын

Description

@whatawasteoftech 3 жыл бұрын

Link for the power lock kit on Amazon is dead now.

@FlakeGarage 3 жыл бұрын

Give this one a try amzn.to/3eyNQeZ

@typicaldavid389 2 ай бұрын

Did I do the wiring wrong? I had connect the positive wire to a yellow wire thinking it was for the radio and found out that it’s draining my battery

@FlakeGarage 2 ай бұрын

It's possible if you aren't using the truck for long periods of time or if the wiring might be different in any way. The wiring on this truck was a mess from previous owners so yours also might be different

@abbprrodriguez744 Жыл бұрын

Hey man your videos have been soooo much helpful thank you ! Now for the alarm system you installed, what is the distance range for the controller ?

@FlakeGarage Жыл бұрын

That's a good question that I haven't really tested. So far it seems to open I"d say from at least 60-70 ft. I usually only open the doors once I'm about to hop on lol

@efrengarcia298 Жыл бұрын

How can I integrate this to viper alarm

@FlakeGarage Жыл бұрын

Idk, if someone wants to send us a viper alarm, we can figure it out 😂

@antoniop5889 2 жыл бұрын

Mine locks then unlocks by itself. I color matched all the wires on the driver side. Trying to figure out why its not working.

@FlakeGarage 2 жыл бұрын

Check all wires on the locks and also what you used to power the controller box. A power wire might be reverse which is activating the box in a weird way

@dnacannotchange 8 ай бұрын

d21..... Bypass the heater core and now it only gets 8 miles per gallon for some reason anybody have any ideas?😢😢😢

@jaimemontoya182 3 жыл бұрын

Were y’all from

@FlakeGarage 3 жыл бұрын

Texas

@xanny7373 3 жыл бұрын

d21 similar to the 87 isuzu pup?

@FlakeGarage 3 жыл бұрын

They are similar from the era yes. I don’t know if their plugs are the same. You would need to look at it

@xanny7373 3 жыл бұрын

@@FlakeGarage the body looks very similar, the panel is a little different but mostly the same, did you guys add and interior switch? in interested in seeing how to do that one...

@FlakeGarage 3 жыл бұрын

We haven’t added one yet. Cant find a good switch we like yet but we we’ll be adding it in the future and we’ll post a video when we do

@Caseyp671 2 жыл бұрын

What happens if your battery dies?

@Caseyp671 2 жыл бұрын

*truck battery

@FlakeGarage 2 жыл бұрын

@@Caseyp671 use your key and open the door lock

@blake8me Жыл бұрын

What if you lose the key

@FlakeGarage Жыл бұрын

I mean you ain't getting in your car without a key whether is a power lock or not

@blake8me Жыл бұрын

@@FlakeGarage but can you get a replacement

@FlakeGarage Жыл бұрын

@@blake8me for the remote you mean? The kit comes with 2, if you lose both of them you'll have to get new programable remotes or a new control unit with remotes