How To Install Quarter Round Like A Pro

Рет қаралды 573,792

4 жыл бұрын

How To Install Quarter Round Like A Pro
We are installing quarter round like the pro's do it so stay tuned as we are going to show you how to do it too! We go through the installation of 1/4 round step by step with easy to follow tips and tricks. You'll be the envy of all your friends and neighbors. And may even become the new neighborhood trim guy. The products I used in this video can now be purchased from Amazon through our affiliate links (see below). Thank you so much for your support this far and we look forward to more 'how to' videos in the future. See you on the next one!
📧 If you'd like to email us, you can do so with the below link
youfloor.net@gmail.com
☕️ Buy YouFloor A Coffee ☕️
www.buymeacoffee.com/youfloor
Thanks to all the supporters and subscribers of this channel! 😁
If You Like This 📺 Channel, Check Out Our Other Channels Below:
📱 Rent This Flip That
/ rentthisflipthat
📱 UnIdentified Channel
/ unidentifiedchannel
📱 iFloor . . . with him
/ @ifloor...withhim9721
🌐 Facebook Page
/ youfloor.net
🌐 Facebook Group
/ 769392503713895
Tools You May Need: (affiliate links below)
White Putty
www.amazon.com/gp/product/B00...
Dark Walnut Putty
www.amazon.com/gp/product/B00...
CA Glue
amzn.to/3LMBu0p
Angle Finder
amzn.to/3wAd9GJ
Brad Nailer
www.amazon.com/gp/product/B00...
Brad Nails
www.amazon.com/gp/product/B00...
Miter saw
www.amazon.com/gp/product/B00...
16 Color Putty Kit
www.amazon.com/gp/product/B00...
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I will receive a small commission (at no extra cost to you of course). This helps support the channel and allows me to continue to make videos like this. Thank you for your support!

Пікірлер: 741

@Dave-nm3xc Жыл бұрын

People that can precut a whole house of trim really impress the hell out of me. Respect!

@YOUFLOOR Жыл бұрын

Thank you Dave.

@DSH1LL 8 ай бұрын

44 inside 46 outside. Brilliant, thanks man!

@YOUFLOOR 8 ай бұрын

Wow. That is my 1st super thanks. Didn't know that was a thing. Had to look it up. Anyway, we appreciate it. See ya on the next one

@zachary_smith1 3 жыл бұрын

Bro. You saved me sooooo much time with that 46 outside 44 inside trick. I was going soooo slow trying to figure out why I had gaps. I wish I saw this sooner.

@YOUFLOOR 3 жыл бұрын

You got it brotha. Glad it worked out for you. Thanks for the comment

@kellykai4068 2 жыл бұрын

Do you cut both side of quarter round at 44 for inside?

@forrealtyler 2 жыл бұрын

@@kellykai4068 If the other side is an inside! Like the backwall of a closet 👌🏼

@themalacast 3 жыл бұрын

Nothing better than people who take pride in their work as this man obviously does. Thanks!

@YOUFLOOR 3 жыл бұрын

Thank you sir

@revenant6488 3 жыл бұрын

Another great video. Wish I was as limber as you. A little hard for my 210 lb 56 year old butt to get down close to the shoe mold. Thanks for great working man's actual install video instead of all talk.

@kimvin9 Ай бұрын

That 44 degrees & 46 degree advice is a jewel!!!!

@coastaldesigns3853 3 жыл бұрын

So many great PROFESSIONAL tips! I've been in construction for a long time but no trim guy has ever explained things this easy. THANKS!

@YOUFLOOR 3 жыл бұрын

Thanks that means a lot

@randysteel8293 3 жыл бұрын

I wish I could give TWO thumbs up!! Who knew to use 44° angles instead if 45° angles on your cuts for corners?! YOU DID!! 👍🏻

@YOUFLOOR 3 жыл бұрын

Thank you sir.

@iancollins7814 3 жыл бұрын

Thank you sir so much for that! I've been doing interior finishing for quite a while and I've never put two and two together to figure that out. Please keep sharing your knowledge with us

@xxdecoy91xx 3 жыл бұрын

These are the hands of a true working man...

@pcm7315 2 жыл бұрын

Best explanation of matching corners I've seen. Finally understand the reason for 44 and 46 degree cuts.

@YOUFLOOR 2 жыл бұрын

Thank you PC m glad I could help. Thanks for the comment

@user-dq7fe9iw3q Ай бұрын

You have the cutest lil bicep bulbs.

@theplaid1 3 жыл бұрын

Great tips even for a guy that's been renovating for over 20 years. I have started using an adjustable stareet miter guage for inside and outside corners, it's a total game changer, no more test pieces

@YOUFLOOR 3 жыл бұрын

Heck yeah brother. 💯👊

@davemeads859 3 жыл бұрын

I've been a carpenter for almost 3 decades mitres are the bane of my existence sometimes this trick is absolutely genius just tried it and it made the job soo much easier thank you for the awesome content

@YOUFLOOR 3 жыл бұрын

Glad to hear that. Good luck on your project. Thanks for the comment

@radish6691 2 жыл бұрын

Right? I don’t know why he doesn’t have more subscribers because his videos are the best and most helpful flooring videos I’ve seen (I’m a DIYer).

@YOUFLOOR 2 жыл бұрын

Why thank you. I love helping when I can. Thanks for the comment

@cosmobella20 Жыл бұрын

This video is two years old, but I came here to say that if it wasn't for your advice/tutorials...I'd have lost my mind with our laminate flooring, bullnose trim baseboard and quarter round, etc... :D

@JD-zx1dy Жыл бұрын

Excellent tip , 44 degrees in vs 46 degrees out....I couldn't figure out why my labors installation looked wrong. you nailed the issue Sir. Thank you so much.

@YOUFLOOR Жыл бұрын

Ha. That's funny. Thanks for the comment

@rsqdvr12 3 жыл бұрын

Great video. The tips helped me finally figure out how to do the miter cuts for quarter round and make it look professional. The 44 degree and 46 degree advice worked perfectly!

@YOUFLOOR 3 жыл бұрын

Awesome glad it worked out for you💪👍💯

@jakemackmusic 2 жыл бұрын

Was just getting SO frustrated trying to install my trim, popped this video on, and you're a lifesaver! It came out great using your method right on the first try. Thanks for posting! Will be following.

@YOUFLOOR 2 жыл бұрын

So glad things worked out for. Would love to see the finished product. If interested send us a pic or two to youfloor.net@gmail.com. We are taking finished pic from viewers and hoping to make a short video of people taking care of their own projects using some of the techniques used in the videos. Thanks for the comment. Keep rocking

@msfva1 8 ай бұрын

I have no idea why I never found you before, but so thankful you came up in my search today. I HATE caulking and puttying! And until your video I could never figure out how to avoid that. Thank you for such a well explained video. You gained a new follower and I will tell anyone I talk to that’s doing DIY to go to your channel!👏🏽👏🏽👏🏽

@YOUFLOOR 7 ай бұрын

I really appreciate that. Thanks for the comment and good luck on all your projects

@KeithBolten-fs7qz Жыл бұрын

This guy is the real deal . Saved me time and made me look like a pro . Thanks

@YOUFLOOR Жыл бұрын

Heck yeah keith ! Get er done. 👊

@Cruxnugget 2 жыл бұрын

Thank you! This has made my DIY projects actually fun! I have to watch your videos quite a few times as you work so fast and I work so slow….,lol. I really appreciate you and your wife putting out such helpful videos. This is way more fun than cleaning the house :)

@YOUFLOOR 2 жыл бұрын

I appreciate that. Good luck on your projects. Thanks for the comment 😁

@nancyharrington8653 Жыл бұрын

I fired tge guy who claimed he was a contractor and Im doing my own work. You saved me on quarter round! It makes so much sense!

@YOUFLOOR Жыл бұрын

That awesome . Glad I could help. Thanks for the comment

@GavanB123 4 ай бұрын

Thank-you so much man. Such an awesome video for installation of quarter round. Just installed floating laminated floor at a house and your video made the installation of quarter round so much easier. I had to watch your video many times over and made several mistakes at the start but soon got the hang of it. Sucha great and simple technique. Thanks again.

@YOUFLOOR 4 ай бұрын

That's good to hear. Thanks for the comment

@kcrase11 3 жыл бұрын

This guy know what he's talking about. I installed my vinyl planking then watched his videos. The only piece I cut twice was the very first one and that was to get the look I wanted on the return. Thanks YOUFLOOR for making my flooring job look great. *****

@YOUFLOOR 3 жыл бұрын

That's awesome !! Love to hear success stories. Glad it all worked out for ya. Thanks for the comment

@kcrase11 2 жыл бұрын

@@YOUFLOOR Just to let you know, I did every room(6 with 3 hallways) except the 3 bedrooms(carpet). First time I had laid flooring and trimmed it out. I like to show it off. Thanks again.

@YOUFLOOR 2 жыл бұрын

😁👊that's awesome. It warms my heart. I love showing tricks I've learned. Figured if I think they're cool someone else might. Thanks for the update. Good luck on future projects. And thanks for the comment.

@theariesavril2997 3 жыл бұрын

I just got my install quote from HD and was wondering what all the other materials were: caulk, foam rope etc. You answered all my questions. Good pace, good lighting and no background noise. Excellent video (and got me rethinking paying for installation!)

@YOUFLOOR 3 жыл бұрын

Thank you so much. I wanted to mention I. My video how to install pergo outlast. I go over sealing the perimeter in a little more detail.kzfaq.info/get/bejne/eLt6a6elvrWpeX0.html. Thanks for the comment

@baranquillero12 3 жыл бұрын

I’m having the big box store do my floors, but your video has great tips. I can now feel comfortable with checking on the crew, when doing the work next week. Thanks for the tips.

@YOUFLOOR 3 жыл бұрын

For sure. And as annoying as it may come off to some installers, legit one dont mind answering any questions on thing you dont understand. Had a lady Zenonhunt@gmail.com me about her steps and the installer did a terrible job. But it was too late after the fact. They for the comment, and good luck with your project

@DavidDeweyIsHere 3 жыл бұрын

Great video for a flooring newbie. thank for the counter examples with 45 degree compared to 44/46. makes perfect sense now, thanks!

@YOUFLOOR 3 жыл бұрын

Thank you sir. And thanks for the comment

@mlacher100 3 жыл бұрын

Wow great tip for cutting the molding. I have always done the 45

@gogators5762 2 жыл бұрын

Dude this video is 100% golden!!! You share you secrets with everyone and that makes you a scholar and a gentleman!!! Thanks bro!!

@YOUFLOOR 2 жыл бұрын

You got it. no problem. Thanks for the comment

@rvvrn 3 жыл бұрын

44 and 46!!! thanks!!!

@Learn2Paint 3 жыл бұрын

Nice work, great video. The 44/46 tip was invaluable. Thank you for taking the time to share your knowledge, it is well appreciated!

@YOUFLOOR 3 жыл бұрын

You got it. Thanks for the comment

@TimYorty 3 жыл бұрын

getting ready to do an entire house remodel and the quarterround is inching to the top of the list. This will help me a lot. Thanks Trim Guy :)

@YOUFLOOR 3 жыл бұрын

Yes sir. Thanks you. Also if you want to up your game a little more. I go over returns and odd angles in this video. Thanks for the comment kzfaq.info/get/bejne/l8ibh7WVx7XIYn0.html

@TimYorty 3 жыл бұрын

@@YOUFLOOR I will. Thanks.

@229glock 3 жыл бұрын

All I gotta say is your handwriting is fantastic.

@YOUFLOOR 3 жыл бұрын

@229glock thanks man! Nobody’s said that yet.

@kevinhewins6416 Жыл бұрын

Great video. I truly learned something….. when cutting molding or basically anything with a saw use safety glasses & maybe put earbuds in your ears so they don’t dangle dangerously close to your saw.

@YOUFLOOR Жыл бұрын

Both are very good lessons. Luckily, no earbuds were harmed during the filming of this video. Thanks gor the comment

@amandateague5146 2 жыл бұрын

Thank you for your videos. We did our first room with Pergo Outlast and watched a few of your videos. We have a lot of refreshing to do around the old homestead. I will keep learning from your channel. 😊

@YOUFLOOR 2 жыл бұрын

That's awesome would love to see some these project I get comments about. Maybe i'll talk to my business partner (wife lol) and start some fb group to post our diy pics on. Excited for the future. Good luck on your future projects and thanks for the support and the comment. Have a great day

@csalazar8426 Ай бұрын

great tips! thank you for sharing your knowledge and experience. Now I just need to figure out if I can do the 44° and 46° cuts using my miter box. I don't have a miter saw at the moment 😅

@smasherscricketclub5274 3 жыл бұрын

Amazing video. Thanks for the tips! Crazy coincident though. I have exact same wood and wall color combo in one of the rooms. Mind = blown!!!

@YOUFLOOR 3 жыл бұрын

Thank you. That's awesome

@SC-sz9ms 3 жыл бұрын

your youtube is officially my favorite. thank you and keep em coming!!! thank you!!!

@YOUFLOOR 3 жыл бұрын

Well thank you so much. I appreciate it

@ninawade3055 3 жыл бұрын

Thank You so much for the video, I’m going to use the 44 and 46 degrees for the my corners.

@YOUFLOOR 3 жыл бұрын

Awesome. Your welcome. Thanks for the comment

@kameronrobinson1345 3 жыл бұрын

you are AMAZING! i love how meticulous you are and the added tips. wish all pros were as detail-oriented as you then i would just pay someone to do all this. oh, and thanks for being efficient at the same time-lots of videos make you wait to get to the point.

@YOUFLOOR 3 жыл бұрын

I hear ya. I'm usually like fast forward to reason I came. Thanks for the comment and the kind words.

@kuklok1989 3 жыл бұрын

Thank you for a short and to the point video!

@brennenrourke1017 2 жыл бұрын

Like everyone else said…. That 44 and 46 trick is incredible! Thank you!

@YOUFLOOR 2 жыл бұрын

You got it. Thanks for the comment

@mistygoodman2821 3 жыл бұрын

Thanks for the tips! Great video!

@graniteforestdojo1372 Жыл бұрын

I skipped all the new ones and came all the way back to review this. Absolutely excellent! Thank you.

@YOUFLOOR Жыл бұрын

I appreciate that. One of the good guys. Btw do you have a karate channel. I am a 2nd degree in tkd

@BadAtGaming100 2 жыл бұрын

That 44 and 46 degree cuts got my Like and exactly why I’m looking you up whenever I have more home projects! Holy guacamole that is clever

@YOUFLOOR 2 жыл бұрын

Always a pleasure to help out. Thanks for the comment

@wezead7711 3 ай бұрын

I'm a female 71yrs boy did you help me out. Thank you so much

@shawshankkful 2 жыл бұрын

Excellent tips for a clean and professional finish! Thank you.

@YOUFLOOR 2 жыл бұрын

No problem. Thanks for the comment

@shamulo3766 Жыл бұрын

Great job thank you! I’m Learning how to do it because a guy came to do that in my home and he did a mess even installing the flooring!

@YOUFLOOR Жыл бұрын

Whoa sorry to hear that. You'll get the hang of it

@MM-sq5pf 3 жыл бұрын

KZfaq comment sections are the best way to observe the array of interpretations of a given stimuli by different brains

@richrellihen1908 Жыл бұрын

Your 44 and 46 degree explanation is a game changer for me.

@YOUFLOOR Жыл бұрын

Good to hear. Thanks for the comment

@JustJoshin648 Жыл бұрын

44 degree inside and 46 degree outside was absolutely perfect edges in my house. Thank you

@YOUFLOOR Жыл бұрын

Right on, brotha. Thanks for the comment

@timothymusson5040 3 жыл бұрын

Best video I’ve seen on this topic! Looking forward to learning more from you. Will definitely use an affiliate link when I can. I think I need some CA glue... :)

@YOUFLOOR 3 жыл бұрын

Sounds good to me me. Yes tomorrow I am going to shoot a video on returns. Thanks for the comment.

@jaytrosper5684 2 жыл бұрын

I guess I'll being using the 44 and 46 cuts on my next home!!! ...lol. Thanks for your help!!!!

@YOUFLOOR 2 жыл бұрын

You got it brotha. Thanks for the comment

@tsetendorjee9040 Жыл бұрын

This is a very good show for How To Install Quarter Round Like A Pro!👌👍

@YOUFLOOR Жыл бұрын

Thanks buddy

@Dave-nm3xc Жыл бұрын

Wow! Great job.

@bobosdreams 2 жыл бұрын

This is life pro tip! You are a good teacher. Thanks for sharing.

@YOUFLOOR 2 жыл бұрын

Appreciate it. And thanks for the comment

@mikenunya6031 2 жыл бұрын

Im only a third of the way in and on the part where you explain the sticker to the left or right... Small details like that make the difference between a good and great tutorial. Great job.

@YOUFLOOR 2 жыл бұрын

Thanks man I appreciate that. Glad I could help. Thanks for the comment.

@grahamtolley4368 2 ай бұрын

Dude! Your 44° 46° tip is a game changer. Thanks!

@YOUFLOOR 2 ай бұрын

Np . You got it. Thanks for the comment

@johnbarber2175 3 жыл бұрын

Great job! I like it.

@lifesaninsidegame7751 3 жыл бұрын

This video was a lifesaver. Thank you.

@YOUFLOOR 3 жыл бұрын

You got it brother

@travisfisher6056 2 жыл бұрын

Really needed this lol!! My trim skills really suck so far!! This is a big deal🙏💪👊

@YOUFLOOR 2 жыл бұрын

Tha k you sir. Glad to help

@ricksflicks- 3 жыл бұрын

Awesome work, thanks for the sharing the knowledge!

@YOUFLOOR 3 жыл бұрын

You got it brotha

@Vetterrs21 3 жыл бұрын

This has been the most useful video ever thank you please keep it going

@YOUFLOOR 3 жыл бұрын

Yes sir. And thank you for the comment

@DjSuperK 3 жыл бұрын

Nice just what I was looking for

@brettrobertson4089 Жыл бұрын

This is really funny cause my cousin who's teaching me has said this exact same thing 🤣

@jdhaas4231 3 жыл бұрын

Excellent, very informative. Thanks

@YOUFLOOR 3 жыл бұрын

Thank so much

@pitmasterhog8726 3 жыл бұрын

Great video. Thanks for the tips. 44 & 46!

@YOUFLOOR 3 жыл бұрын

You hot it my man. Love the name. Thanks for the comment

@seananderson5450 3 жыл бұрын

Thank you!!

@LiveEasy 2 жыл бұрын

Exactly what I needed. This is great. Thanks!

@YOUFLOOR 2 жыл бұрын

You got it. Thanks for the comment

@roseandrope 2 жыл бұрын

This is so helpful! We just bought our first home, and we're going to be DIYing so many things. Your video is a life saver! Thank you! All the likes! And subscribed!

@YOUFLOOR 2 жыл бұрын

Thank you so much. And thanks for the support. Good luck on your projects

@tonymize5318 2 жыл бұрын

How do I determine the angle to cut for a non standard joint? A room I need to do doesn’t have all 44 degree angles. Thanks

@YOUFLOOR 2 жыл бұрын

I have another video which is kinda a part 2 to all the questions I had from This video. It's shows me using a miter finder to dile in on a precise angle and turn your saw to the right spot to get that miter cut. Hope it helps Thanks for the question kzfaq.info/get/bejne/l8ibh7WVx7XIYn0.html

@harveyfedykful 2 жыл бұрын

Thank you Sir. Excellent teacher!

@YOUFLOOR 2 жыл бұрын

Thank you. Good luck on all your projects. Thanks for the comment

@tomhenschel1104 2 жыл бұрын

Dude you’re a master of your craft and as a teacher. Thank you for sharing your incredible knowledge.

@YOUFLOOR 2 жыл бұрын

That's awesome. Thank you sir. And thanks for the comment

@davidknudson5166 2 жыл бұрын

Thanks for your excellent tips on installing quater round

@YOUFLOOR 2 жыл бұрын

You got it my friend good luck with your projects

@tgray8593 3 жыл бұрын

Thx for the 44 degree cut info...i will try that out.

@YOUFLOOR 3 жыл бұрын

Yes sir. Keep in mind cabinets are built square so keep those miters on a 45°. Thanks for the comment.

@CharlesWalker02 3 жыл бұрын

Great video for the diy’er! Awesome job sir.

@YOUFLOOR 3 жыл бұрын

Ty sir

@GallavantingBlasians 2 жыл бұрын

Awesome! Just plain awesome! Thank you so much!

@YOUFLOOR 2 жыл бұрын

No problem. My pleasure. Thanks for the comment

@true615american2 4 жыл бұрын

Very informative video, thanks bro, keep up the great work

@YOUFLOOR 4 жыл бұрын

Thanks man. You kind word are very much appreciated.

@dennis17116 3 жыл бұрын

Great tutorial! 👍🏻

@eromalley Жыл бұрын

Fabulous! Thanks for doing this.

@YOUFLOOR Жыл бұрын

No problem. Thanks for the comment

@tommckenna602 9 ай бұрын

Great video, thanks for the pro tips! They helped me install some tight seams in my dads kitchen.

@YOUFLOOR 9 ай бұрын

Good to hear. Rock on. Thanks for the comment

@hopelessnerd6677 3 жыл бұрын

Very useful tips. Thanks!

@YOUFLOOR 3 жыл бұрын

you got it. Thanks for the comment

@asincere7015 2 ай бұрын

Hey , great job .😊

@blackdogproductions2044 3 жыл бұрын

great video man! Thanks

@YOUFLOOR 3 жыл бұрын

Thank you @blackdogproductions

@danhealyeverythingoutdoors7105 5 ай бұрын

Love the shirt !

@ihavebeenpaid 2 жыл бұрын

Excellent video! Great job!

@YOUFLOOR 2 жыл бұрын

Thank you

@gocybigt1 3 жыл бұрын

fkin awesome my man! ty so much for making my installation prep ez and enjoyable keep it up!

@YOUFLOOR 3 жыл бұрын

Thank you. Glad to hear. Good luck with all your project. Thanks for the comment

@marklaffey7972 3 жыл бұрын

Great video!

@YOUFLOOR 3 жыл бұрын

Thank you sir

@noquestions7443 3 жыл бұрын

Bro you are efficient perfectionist and experienced

@YOUFLOOR 3 жыл бұрын

Man that's awesome. Thank you for the kinds words and the comment

@DonneishaSmith 2 жыл бұрын

I love, love, LOVE how you have explained this!! I'm having to do my own quarter round and now I feel like I'll get the job done without too much stress! Thank you!!

@YOUFLOOR 2 жыл бұрын

Awesome!! You got this. Good luck. Thanks for the comment

@ZEPPELINATTACK 2 жыл бұрын

And by the way a word on your editing skills.... Perfect.

@YOUFLOOR 2 жыл бұрын

@Adam’s House Creations Thanks…so many people have different opinions on that!

@kathleenrutherford733 Жыл бұрын

Amazing how to tips! Wow

@YOUFLOOR Жыл бұрын

😊 thanks

@Fraxter3813 22 күн бұрын

Dude- I have done my 1st room with a beadboard, chair rail/ cove moulding and quarter round - using your system of notating numbering / naming your cuts. I will never not use that system! I still feel like I have to check my 1st cut on 1 side on wall before I cut the other side… until I get better. I have been doing the mitered returns, or trying to do them. U just solved the mystery of why those returns are not matching on some of the quarter rounds, omg I thought I was losing my mind. I love the material and appreciate your time. Idea for future… would love more on mitered returns for base, moulding, any kind of wood application. And how do you put in a baseboard transition when heights are different from one wall / room to another. Thanks and I will keep watching!

@Fraxter3813 22 күн бұрын

I just found more on your channel for the returns…. Thank you…

@YOUFLOOR 22 күн бұрын

Very glad to hear of your success. Thanks for the idea for the video. That would make a great tutorial. Keep on doing your thing and good luck to you on your projects