*ASK QUESTIONS, GET WEEKLY TIPS, EXCLUSIVE VIDEOS AND GUIDANCE, ALL FOR JUST £2.99* www.onlinearcheryacademy.com/subscribe-to-online-archery-academy/
@richardmorriarty4333 Жыл бұрын
Hi! I shoot Right and My daughter shoots left and we just started. If I want to align her sight can I do it with my right or should I try with left eye?
@sebsch14404 жыл бұрын
Just wanted to add two other methods that are useful for sight to bow alignment: Put the sight extension in backwards facing towards yourself/the string. Now you have your sight pin very close to the string and are able to line them up on both sides of the sight sled. (Only works if the sight is machined well) Another Method: take a vertical (use level) strip of paper as target on low distance. Shoot at it with 18 and 70 m sight setting. Compare your left and right grouping
@OnlineArcheryAcademy4 жыл бұрын
Awesome, thanks for sharing!
@Piasecznik723 жыл бұрын
I'm using same method. Super easy.
@avafsasf4 жыл бұрын
You are productive, new video almost every day. Keep it up.
@OnlineArcheryAcademy4 жыл бұрын
Thanks! 😀
@pequodexpress Жыл бұрын
I saw an interesting video that recommends reversing the sight and lining up the pin with the string for lateral calibration.
@ZephrusPrime4 жыл бұрын
I always use a very thin piece of leather under my block against my riser. It helps it from scratching the riser from the screw marks and offers a nice snug fit for the block.
@OnlineArcheryAcademy4 жыл бұрын
Now that is a great idea!
@2ndAveScents8 ай бұрын
Where do you find a very thin piece of leather?
@codpug7 ай бұрын
@@2ndAveScentscraft store
@AnthonyBachtiar7 ай бұрын
Yeah in this video the long stabilizer was confusing me at first because it is aligned with the arrow point and the sight, but finally I can see the way you set them.
@vincentcausey84983 жыл бұрын
My sight is a panel pin I nailed into the riser. Maybe I should upgrade :)
@nanangk53p3 Жыл бұрын
Hi Im From Indonesia.. Tyvm Great explanation
@hamriajalil10123 жыл бұрын
Thank you for the clear explanation. Will check my sight now
@mikhailfong62344 жыл бұрын
Awesome. Great explanation. I always take it for granted. Will definitely check it.
@OnlineArcheryAcademy4 жыл бұрын
Thanks! Glad it helped :)
@arioskuter4 жыл бұрын
I think your setting's methode are usefull before drawing the string. Because it would form the new plane while drawing to maximum draw length, it could be another different plane than before.
@OnlineArcheryAcademy4 жыл бұрын
Thanks! I'm glad it was helpful :)
@luverneanimatics87694 жыл бұрын
Woah I never check this on my sight I thought it's pretty much align already its just like plug and play. Now I have to check this as well.
@OnlineArcheryAcademy4 жыл бұрын
Definitely worth doing, and it's really quick anyway :)
@jjpython Жыл бұрын
Nice, easy to follow video, thanks for posting
@franks41032 жыл бұрын
Thanks for this useful video!
@What-videos-to-watch-today2 жыл бұрын
Thank you so very much for this video! I just bought my first topoint unison as my first recurve bow and it did not come with a manual on how to set up the sight.
@brentwinterton52293 жыл бұрын
Great informative videos . I do have a question about what is the purpose of the extension? You set your site up at the end of the extension I’m curious as to why or when you set it up in the middle or front . I’m just starting and have seen many different locations on other bows at the range , cheers
@mathiashammar14 жыл бұрын
A simple way to check if the sight apature is aligned with the plane of the bow is to turn the sight-bar around 180 degree, so the sight apature almost touch the string. Fasten sight-bar, then use the "quick" adjust for elevation. Move the apature with elevation quick adjust from top to bottom. If string and sight is paralell from top to bottom your ok. If its not inline you need to figure out if its the sight mount/ sight that is out of plane or limbs or a mix of everything. Good luck.
@OnlineArcheryAcademy4 жыл бұрын
Great tips! Thanks for sharing :)
@musinKanto4 жыл бұрын
Using double sided tape (spinwing tape) on the sight stick a credit card 💳 with the magnetic parallel to the string. I’m unable to precise with any terms where to stick it but is on the back of the track on shibuya sights. is quite obvious. Card will also rest on the sight. The magnetic band on the card offers a perfect contrast to align the card with the string
@OnlineArcheryAcademy4 жыл бұрын
Great idea too!
@48JF5 ай бұрын
Good video…Someone already sad it below…when you mount the sight backward that the pin 📍 is closest to the string, you can actually measure the difference from button to top position 📏
@davidphillips65822 жыл бұрын
Thanks!
@hamishmccreight66392 жыл бұрын
When you attached the horizontal bar to the vertical bar of the sight, it was screwed right in the middle of the vertical bar. I assume that is the default starting point. Just wondered what might cause you to move the horizontal bar up or down from the default(?) central position........
@blainclatworthy54234 жыл бұрын
Actually, the best material to prevent the screws from coming lose is clear nail polish. It won't cause corrosion, but they won't come lose and easily removed.
@OnlineArcheryAcademy4 жыл бұрын
Haven't tried that before! I'll have to do that!
@blainclatworthy54234 жыл бұрын
I received this tip from a Veteran Gunsmith
@alimertc Жыл бұрын
loctite maybe?
@blainclatworthy5423 Жыл бұрын
@@alimertc Loctite causes corrosion, the nail polish doesn't.
@2ndAveScents8 ай бұрын
@@blainclatworthy5423one of the main benefits of thread locker is corrosion protection. It’s the number one thing mechanics reach for when we need to make sure a fastener doesn’t get rusted or galvanized or any kind of corroded in place. Don’t use excessive amounts and only use blue and you’ll be fine. Idk where these corrosion causing claims are coming from I’ve used the stuff for decades and it works perfectly.
@user-mo4vm5ve8q3 жыл бұрын
I am in a big confusion to order recurve archery sight . Please help me 🙏. Can I fit any archery sight in recurve bow. For example _ in club 700 recurve bow , can I fit club 500 archery sight
@JakeBullit1234 жыл бұрын
Hi Ashe,I notice you have a wing nut for your left right movement, I use a thumb screws on mine. Is that for a quicker coarse adjustment?
@OnlineArcheryAcademy4 жыл бұрын
It is! Good eyes! It’s always at the most inconvenient time that you need to do the coarse adjustment isn’t it?! 😂 so I decided to modify it.Great minds 😁 It’s so good 👌
@alexanderroland72244 жыл бұрын
Online Archery Academy
@OnlineArcheryAcademy4 жыл бұрын
Boo! What's up?!
@DanielBascomАй бұрын
What brand of sight is that. just bought one for my metal recurve and I still have a return window. That one looks like it adjust for canting left or right.
@jihanmeerasaib1435 Жыл бұрын
i have a question... if my form is good but my arrow keeps going down when I shoot, do I move my sight up or down? and if it keep going to the left, do I move the sight to the left or right? Thank you in advance