How To: Install Suspension on your E90/E92 BMW!

Рет қаралды 62,664

2 жыл бұрын

Today, I show you how to install a full suspension kit on your 3 series BMW! This is a condensed tutorial with tips and tricks so you can get the job done yourself at home, and save money instead of going to a shop! If you have any questions, or knowledge to add, please leave a comment down below!
Note: This video description contains affiliate links. If you click on one of them and make a purchase, I may receive a commission. This occurs at no extra cost to you, but helps keep the channel going!
Strut spreader socket - amzn.to/3HybgNu (affiliate)
Thanks for watching! Don't forget to check out The Bimmer Barn store to grab some merchandise, and get exclusive access to EXTRA content through our Patreon! :)
thebimmerbarn.com
patreon.com/thebimmerbarn

Пікірлер: 83

@GrooveDigger808 2 жыл бұрын

The reason you struggled to get the front strut to clear under the fender - and the reason the knuckle didn't drop any further when you loosened the tension arm bolt to subframe - was because the brake line was completely tight and being stretched by trying to force it downwards... If you remove the caliper, so the brake line isn't limiting the movement, and unplug the wheel speed sensor, the knuckle can then drop down as far as you want. You'll want to loosen the control arm to subframe bolt as well to save that bush also being twisted - unless M3 LCA which have a spherical bearing.

@kylebui6061 2 жыл бұрын

You are uploading back to back everything I am planning to do this week..LOVE IT! Keep up the quality videos (:

@fasteat1 2 жыл бұрын

Nice vid! Went with the exact same Konis along with M3 arms and OEM Sport Springs and I love it!

@regulardude2011 2 жыл бұрын

Oh dude! That is neat. I gotta pre-assemble my shocks and springs. Not a big a deal. Watching your video to get an idea of what it takes to change out my beat up shocks/struts

@jasonbourne1119 2 жыл бұрын

Thank you for the video! This is my next upgrade for my e90

@upshift2690 Жыл бұрын

I need mine to sound like this, looks good with stock wheels and lowered. That’s next on my list plus the abc at some point

@Nico_335i_DCT 2 жыл бұрын

Very nice setup Chris. Have an amazing day too! Dutch regards, Nico.

@TheBimmerBarn 2 жыл бұрын

Thanks Nico :) I mean it when I say it!

@mtridgee11 2 ай бұрын

Great Video Dude, Stright Forward!

@user-xm6oq9gz9u Жыл бұрын

I have the same setup coming. I bought from strut. I hope I like the ride

@henryluis8948 2 жыл бұрын

Nice video as always👏🏽👏🏽👏🏽👏🏽

@TheBimmerBarn 2 жыл бұрын

Appreciate you 🙏

@benb5489 9 ай бұрын

Thanks I have to do it on mine 👌 have to find a kit in France 😅 take care

@Godobojo123 2 жыл бұрын

Do you need to upgrade anything else when putting coils on these cars such as control arms or bushings or anything of the sort? I have an x-drive model not sure if that matters

@mrmackee123 2 жыл бұрын

What content on this channel 🔥

@TheBimmerBarn 2 жыл бұрын

Thanks mate 😊

@QuickDraw247 Жыл бұрын

Thanks for sharing - in envy of your hydraulic lift ramps! What is the model?

@Onizukachan915 2 жыл бұрын

Amazing how much easier the e46 and the f30ix are to do suspension on.

@teezy_s 2 ай бұрын

6:50 .. that brake hose about to leave the chat like Drake ....

@hanynowsky 5 ай бұрын

What s your return on experience for Koni Active Special. I have them on my E60. Way better than stock in terms of dampening and comfort while cruising but somehow buggy at lower speeds

@scottmcdowell5586 Күн бұрын

Nice job! I am curious to know the name brand of the struts/shocks/coils? Thanks!

@brandoncheca6555 Жыл бұрын

Can I get the link from where you bought it?!

@luckyhack78 2 жыл бұрын

Good job ! Strange for Eu like me to see diesel engines in USA

@keeganbecker1254 2 жыл бұрын

where can i find that carlift??

@pugs1377 2 жыл бұрын

Nice. Not much of a drop. I wound up going with dinan springs on my 335 xdrive. They had the least drop of any lowering springs. I was going to go with bc or fortune coilovers but they were on back order for several months at the time so being impatient I got the dinan springs and koni yellows. Awesome ride compared to the 100k stock struts

@TheBimmerBarn 2 жыл бұрын

Definitely! And honestly there's no point in coilovers unless you need to go very low, or will be tracking the car. Thanks for watching Pugs 😎

@moebeing1190 Жыл бұрын

@@TheBimmerBarn When you coilover, are you saying, new springs weren't necessary ? In retrospect of coarse.

@JB-B58 Жыл бұрын

Update on the ride quality ??

@davejohnson6144 2 жыл бұрын

How comfortable do you feel the Active Koni shocks are ? Im thinking about getting them because I feel the stock sport suspension is too jarring.

@hanynowsky 5 ай бұрын

Way better than stock. I have them on my E60

@BlessedtoFly 2 жыл бұрын

Good video. I had already decided on the Koni special actives before seeing your vid. Would have liked to hear more about the ride performance at the end. I'm at 280,000 miles on my 335D and it has been a great car. Hope to have a like new bimmer after a little more work.

@BlessedtoFly 2 жыл бұрын

Installed today along with new bushings kit from ECS. Ride is amazing. Super smooth. The Koni Special actives made my 280k mile E90 ride like a new car.

@someearthbeaner619 8 ай бұрын

How much ??? Need to install suspension

@BlessedtoFly 8 ай бұрын

Don’t remember exactly. ECS Tuning has them for around $570. Did the refresh kit from them too for another $120. Still happy with them. Just turned 306K miles this week.

@Clappedout_films Жыл бұрын

Thanks bro helped me a lot but what if I wanted comfortable suspension? What would you recommend?

@TheBimmerBarn Жыл бұрын

Lowering springs and new oe struts if you want soft comfortable suspension!

@iamauser2198 2 жыл бұрын

I have done this job twice. Both times I had to unbolt the front tie rods to make enough room to get the front strut out. Are you sure no damage is being done to your front tie rod when you do the job like this? I don't have a shop manual so maybe I am just missing something here.

@TheBimmerBarn 2 жыл бұрын

What I do to get a little extra room was turn the steering wheel away from the side I'm working on. Also, removing the tie rod would definitely help, but then it's just a pain to put the new strut in IMO. The service manual recommends removing the "wishbone" (lower control arm) first in order to remove the strut. Thanks for sharing your knowledge and for watching, Stoney!

@rschneid1996 2 жыл бұрын

Good video. As a suggestion for the front struts removal / install, you can attach a spring compressor to the coil and compress the spring an additional 1/2" or so. This makes it easier to swing the assembly in and out.

@richcruz8924 2 жыл бұрын

Awesome… thanks for sharing. New to the channel 👊🏽. I’ll be doing my front and rear in the coming weeks as I jus put in an order with Cygnus - x1. Question… I’m all about replacing/upgrading parts while I’m in their. How difficult is it to upgrade/replace the rear subframe bushings and other parts? Where in FL are you at? Again, thanks for sharing 👊🏽

@TheBimmerBarn 2 жыл бұрын

The subframe bushings require a special tool and you must lower or completely remove the rear subframe to install. Sadly that's a job of its own! 😅

@richcruz8924 2 жыл бұрын

@@TheBimmerBarn thank you. I saw your video. I’ve done the front, and was wondering if the rear was just as bad 😄. Thanks again

@ts6141 2 жыл бұрын

@@TheBimmerBarn you can make a tool from parts available from a hardware store....BUT it's still a JOB, took me about a month over winter to do them in my 335iS

@lpjdnfamily 2 жыл бұрын

Were the springs you removed sports suspension springs? I noticed the Eibach springs didn't lower the car much from it's original height.

@thebmwM 2 жыл бұрын

Hello JDN , this is my ride , I didn't want to drastic of a drop , I have my family in it occasionally just wanted something a little bit lowered but nothing crazy , this was the right combination after searching.

@randyr.8536 2 жыл бұрын

@@thebmwM how much was the whole suspension kit?

@zureai 10 ай бұрын

Anybody know if I can use e90 suspension on e92? Someone is selling coil overs for the e90 but I'm not sure if they fit on e92

@crazy4gta1 7 ай бұрын

You should be able to. Check the part numbers between the cars and see if they match just in case

@nikopalonen92 2 жыл бұрын

335D E90 is cool, but 330D E91 LCI Manual is just as capable and wagon increases cool level no doubt.

@BimmerMafia 2 жыл бұрын

Capable but not nearly as fast. Don’t get me wrong. Launching out the hole that 330 torque gets it. But after 60mph. The n54 will pull considerably

@celiocalves 2 жыл бұрын

What is your feedback about the suspension? I'm undecided between Bilstein B12 (B8 struts + eiback pro kit springs) or your kit. PS: I have a e90 335d too :D

@rc666 Жыл бұрын

Forget Koni.

@rawlexgardner6053 Жыл бұрын

What is that jack that lift the car?? thtz nice

@TheBimmerBarn Жыл бұрын

Those are Quickjacks, I have a full video on my channel!

@alfredoviccon1702 5 ай бұрын

Hey ! where are you from? Good job !

@BassFraud 2 жыл бұрын

This 335 looks clean ! I need to do this upgrade on mine lol How much is this kit? Looking for a budget friendly option for new shocks . Might just source a junkyard

@TheBimmerBarn 2 жыл бұрын

The kits are price individually, so you can try reaching out to the company. You can also get factory style struts for cheap on ebay if you need something to hold you over. Good luck, maybe you'll find some used sport shocks or coilovers at the junkyard!

@BassFraud 2 жыл бұрын

@@TheBimmerBarn thanks man always appreciate your feedback & advice 👏🏽

@daithi154 10 ай бұрын

The timing chain rattle is yikes, id be scared of that on my n47 lol

@albaro08a Жыл бұрын

Those poor brake lines lol

@worldoftanksreplays1734 Жыл бұрын

-2cm and -3 cm ?

@umbertosannella 2 жыл бұрын

How did he get the window shades????

@TheBimmerBarn 2 жыл бұрын

Factory option, very rare to find. A BIG flex for sure 💪

@umbertosannella 2 жыл бұрын

@@TheBimmerBarn I’ve seen the retrofit but you gotta like cut the window sooooo

@michaell.445 Жыл бұрын

Video starts @4:18.

@user-xm6oq9gz9u Жыл бұрын

How did you tighten the rear top bolt without it spinning? I tried with a impact but it’s spinning

@TheBimmerBarn Жыл бұрын

If it spins, you'll need to put a vice grip on the shock in the wheel well to tighten it. it should grip up and you can tighten it the rest of the way. Hope that helps!

@user-xm6oq9gz9u Жыл бұрын

@@TheBimmerBarn thank you for the response.