The cause of the water pump engine that cannot suck water is because there is a damage to the water pump engine. The water pump machine itself is a machine that is used to suck water and move the water to different places. This water pump machine is also often referred to as an alkon keongan water pump. These snails are often used in agriculture and industry, especially for irrigation problems and also excessive water disposal. The machine that functions to suck this water does sometimes have problems. And one of the problems that often occurs in this snail pump machine is the loss of suction power even though the machine is on so it cannot be used to suck water. The main cause is that several components have been damaged, resulting in water not being able to rise into the pump tube or not being sucked in by the alkon water pump machine. Another cause of the alkon machine that does not suck water is a lack of understanding about how to use the water pump machine. So there is a possibility of an error in the installation of the hose, so that there is a wind leak in the suction hose line which causes the water to not be sucked in. To solve the problem of a water pump engine that does not suck water, it is necessary to check and in this video we provide an installation method to replace the snail shell, please check it out. Don't forget to click the like, share, and subscribe buttons for this channel so that it can continue to grow and provide other useful info. We are from one of the home industries in Tulungagung, namely Tusen valve and water pump factories are trying to meet the needs of equipment in the field of plumbing and irrigation...