You gotta love the old school emergency brakes in a Toy.

Another super cool upgrade. Very cool Jon. I just got a 92 2wd with very low miles that I cannot wait to make these upgrades too!

This is exactly what we are having to do right now! Same old cluster, same year! You are the man for this video!

Best description of how to take apart the dash assemblies I have yet to come across. Many thanks!

Just used your tach wire tip and it worked like a charm. Thanks!

Thanks for the info, Been wanting to do this for a long time, but was intimidated. Didn't know where to start. Will keep this video when I get brave enough to attempt it.

Sweet, this is a great update. I'll get me one of this cluster for my truck, I'll probably need your help the oil pressure gauge.

Answered my tach question. Thanks!

I did this swap and the speedo and odo did not work, I think it was a bad unit?

i’m having trouble with the volt meter after this conversion, any ideas ?

Can an sr5 cluster be installed with a 22re motor with no oil pressure sending unit needing replaced correct?

The turbo cluster in the 1985 turbo that is digital is out of this world. Also the fact it has an altimeter.

Do you have a video showing how you put your stereo in? Having trouble finding constant 12v in stock wires.

That easy plug and play?? plus a sending unit change out for the oil pressure

Thank you for video, it is very helpful. I'm just about to swap mine and I checek the wiring

Thanks man. This really helps 👌

I have 1994 toyota pickup. I am looking for a the dash that is over the cluster. Does any one know if I can us a 4runner one ?

Great video: Thank you!

Thank you for the video bud, fuckin mint tutorial.. doing a swap from a forerunner dash to my sr5, definately saved me some time

I got my new sr5 cluster in but even with old oil pressure sending unit unhooked it still runs my oil pressure gauge up. My question is if I install the sr5 sending unit do you think that would solve the problem

Hey buddy I did everything in the video, and everything works except the speedometer, I hooked the wire on the back of the cluster and the rpm works..I even bought two speedometer from the junkyard and still , the speedometer not working.. What can I do?

I have a '93 4x4 and am trying to figure out what i need to swap a shifter bezel from the same era 4runner into it. Any knowledge on that subject?

I just swapped the cluster of my 91 pick up watching your video and it worked perfect the tac but the speedo doesnt work. The new cluster its an electronic but not the old one... Any suggestions so i can make it work or do i have to find the cluster with the old sistem?

in the middle of tearing apart my dash and putting the cluster back in the speedo cable is too short for me to have hand back there to plug it back in, noticed you dont seem to have speedo cable in the video, is your cluster wireless?

I need help! So i did everything that you did and everything works 100% except for a frigging brake light, its on all the time. Oviously when the parking brake is on it illuminates brighter, but whe i disengage the brake it is still on but not as bright. Fluid is all the way to max so it shouldn't be the fluid, also with the old cluster i did not have any lights what so ever. Any ideas? please help. I hate having lights on the dash.

Amazing video my 93 pickup came with it.after converting it into carbureted engine my 93 Speedo does not work anymore..I looking to do a cable swap.

I have a question, the oil pressure sensor that I need to put has to be the one that had the 4 runner of sr5 where I removed the cluster

Hey GBH, i have an 89 toyota pickup 4x4 that the speedometer went out about a yr ago and i finally found me a local instrument cluster it is out of an 92 toyota pick up also a 4x4 and im wondering if it is going to work and what modifications i am going to have to make/incounter.?? Please help, im not all that good mechanic wise...thank you very much..

If I tap into the yellow wire will I still have to do the potentiometer step or does that skip all that?

This worked for me so thanks for the video. Quick question: my fuel gauge doesnt decrease when I shut the truck off like it did with the old clusters fuels gauge's, is that normal (does yours do this)?

I replaced my cd player and everything turns on but no sound. Did you have that problem or know what it could be? I just bought a cluster and going to install soon. This helped alot thanks.

If the replacement gauge cluster came from a V6 does the truck getting the replacement gauge cluster also have to be a V6 or can it be a 4cyl??

I installed the cluster but the oil pressure gage do not work, I did replace the oil pressure sensor but still no work, any ideas please...

awesome video thank you

would a 4x4 pick up truck with a 22re motor in it .. can the Guage cluster fit in a 1992 2wd pickup ? and how do u adjust the pentometer

I have a 95 Toyota Pickup, my speedometer and tachometer does not work but the fuel and coolant meter works. Do you know what might be the issues?

I checked the wiring and and my pickup is not prewired for the tachometer, can you please tell which wire did you tap in the distributor coil? I think I heard you say yellow wire but I'm not sure. Please let me know

Question: Why and how does your 94 toyota have those push out cup holders? Is that something you buy? You made? Please tell me.

My speedometer seems to not be working, I put this into a 93 Toyota pickup. Anomuonr k or what I could do?

how do you change the Odometer numbers to match the vehicles true reading?

I`ve never seen a Toyota engine that didnt have oil all over it ..congratulations!!

I would have liked to have done this swap - but my just inherited '93 Xtra Cab DLX already has it! Must have come with it, since my stepmom wouldn't have changed it, and she got it from the dealer. Weird;)

Garage Built Hondas bro I did this to my truck and I've tried several oil pressure sending units to make oil pressure gauge to work but they don't work by the way they are used o didn't buy a new one because I don't know if the harness pin outs are the same or need to modify any to make oil pressure gauge to work any help is aprecciate it everything else worked!

I have the 22re engine would it work if i swap the tech from a V6 4runner

Jon, great videos. i was wondering if you might know if a 1991 toyota t100 gauge cluster will fit aa automatic 1990 toyota dlx?

I just did this with my 1989 toyota pickup. it has a 5 speed swap. What speedometer cable should I use? And how should I go about with the tachometer?

Do you happen to know where the oil pressure sending unit is on the v6? That is the only thing holding me back from putting everything back together. lol

heya pals, i have an issue.. not sure if its with my truck or the cluster I got.. i used both the resistances noted in the video.. and I get this result: the tach goes from pegged at zero to approx 2500/3k RPM once i move key to position 2. once i start it, it only goes up from there when i press the gas pdl. also, none of the lights on the dash, nor turn signals work. any ideas?

Well that yellow wire work on putting a electrical tachometer for the RPM gauges to

Hi, I hope you can help me. I did everything but the temperature, oil, voltage and gas level are not working. I already check the gauges in a 12v battery and they worked correctly. However, when I install the cluster into the truck they dont work at all. Any idea? Thanks in avanced.

What exactly is a potentiometer and what does it do for the cluster?

Awesome video! What's that orange plug to the right of the ignition for? Im putting my 95 runner back together and for the life of me can't find it's home.

Hey bro what type of wire did you use for the tac to work?

Hey man I hope u still answer your comments. I have a 93 that the speedometer( it is electrical) does not work. I am looking into 94-95 cluster from a 4 runner just like the one you used. So I have a few questions concerning the new cluster. But if by any chance you still have the original cluster from your pickup(which is the same as mine) and you are willing to sell to me if it still works and does not cost an arm and a leg it will buy it. It will save me many headaches. 1st what is the oms on the RPM for a 4 cylinder? 2nd what it the part # for the oil sending unit and is it the same for 4 and a 6 cylinder motor? 3rd do i just connect the 4 connections to the new cluster and does everything works or is there some other thing I need to do so it works? Hope to hear from u soon. Thanks Robert

Does this cluster have to be fron a manual trans 4runner?

Hey bro. Great video & can’t wait 2 do this mod. Question. Can I fit a 94 4Runner cluster 3.0 4wd 5speed on a 94 pickup 2.4 4wd 5speed ? Will it work properly?

Do you know if the cluster from a 97 will work in 89

How did you get your odometer to match with your original mileage.

Hey I got a 1990 you think I could do this swap!

Any idea if I can swap the electronic speedometer out of my '94 pickup DLX 22RE cluster into the '95 4Runner SR5 v6 cluster I got at the junkyard? I've come across 7 of these 4Runner SR5 clusters in the junkyards near me -- ALL of which are for the cable speedo, which stinks since my pickup is electronic speedo. It's a bit of a shot in the dark, but I just don't want to go to the trouble of removing my DLX's cluster only to find out it won't work (if it indeed doesn't). Thanks!

What company makes that dash cover you got on it?

hey do you have a rear sway bar and if you do where did you get it

Do you have a clinometer for sale?

I have a 1989 toyota pick up could i install a sr5 clúster like yours?

What type of wire did you use to connect the tach?

Nice Video! I'm about to get that cluster myself but mh main concern is how exactly do you adjust the potentiometer? I read and saw pics of the link you posted but really doesn't say how to increase resistance?? I see that it says to check resistance but how exactly to you increase it or adjust? or am I missing something?

Ayeee yeee

set your old mileage on the new cluster?

You mentioned an oil pressure sending unit. What's that all about?

I did this but the speedo dont work my base one works but sr5 dont

Why exactly did you remove the glove box ?? There was no need on my 94??

Ok. If you come across another one of these clusters with tach shoot me a message. Thank you sir.

I have a 90 Toyota pickup and I am so mad I didn't read the description before I paid $40 for this cluster off of a 4Runner

Does the speedo and odo work?

do you have a speedometer cable?

Where can I buy one ?

Is that a 4 or 6 cylinder?

how much did the cluster cost?

where can i buy the cluster?

l have to install an after market cruise control on my 1991 toy. pickup ... is there any one in the Houston, Tx. area that can help me install this Rostra unit? ... l don't want a lot of trial and error. Better if someone with the experience to cut straight to the right outcome. Contact me here on you tube please.

how do l bypass electronic speedometer on a toyota pick up 1993?

Hope you switched out the sensor or you would blow the gauge out

This sucks, I gotta do all that just to replace the air vent next to the driver door!

what kind of dash mat is that

These things are hard to find. $20 is a steal compared to eBay prices. I tried looking in some junkyards, but no luck yet. If I had a ford this would be super easy, junkyards are filled with fords. The treasure hunt will continue..one of these days.

Can be work 95 4runner sawp to 95 tacoma

Me gustaría hacer lo mismo, también tengo la misma camioneta, ¿puede darme el número de pieza del grupo, por favor?

its diesal engine

quit stealing the clusters that us manual drivers need