No video

How to install UHF PL-259 Solder Male Connector (Ultraflex 7 Coax Cable)

  Рет қаралды 16,855

Messi & Paoloni SRL - Coaxial Cables

Messi & Paoloni SRL - Coaxial Cables

3 жыл бұрын

The connector is suitable for Ultraflex 7, Extraflex Bury 7 and POTA-Flex 7.
FIND CABLES & CONNECTORS HERE: messi.it/en/ca...
But why to choose this connector?...
• Compression design with double seal that ensures better protection against infiltration of water, humidity and condensation.
• Easy installation and welding instructions included in the package (no braid soldering needed).
• Dramatic suppression of the background noise, improvement of screening attenuation and insertion losses.
• The surfaces are treated with a special alloy called Smart3-Alloy®: it is corrosion-resistant and hypoallergenic.
• The new designed pin prevents excess of tin and the consequent heating, which damages the dielectric causing an uncontrollable alteration of the electrical properties of your cable (differently from standard PL259 which is exposed to strong thermal stress).
• In typhical UHF (PL259) threaded RF connectors it is necessary to fill the center conductor pin with melted solder, Evo's rounded Pin eliminates the problem of solder burrs. Sophisticated machining improves the opening of the plug's bottom and facilitates introduction of the cable's conductor.
• Structural enhancements to the connector components, lead to EVOlutionary improvements in both assembly speed, solder saving, Insertion Loss, Return Loss and Screening Attenuation (SA).
• The new UHF Evolution can be used conveniently up to 6000 MHz, a well made PL259 is barely acceptable up to 2000 MHz. Never has a PL come so close to the famous "N" connectors for performance and reliability!
CREATE YOUR CABLE HERE: messi.it/dati/...
CONNECTORS: messi.it/en/ca...
HAM RADIO COAX CABLES: messi.it/en/ca...
Follow us on:
FACEBOOK - / messiandpaoloni
INSTAGRAM - / messiandpaoloni

Пікірлер: 17
@garystone6171
@garystone6171 5 ай бұрын
Man I just love M&P coax and plugs - just sooooooooo easy to work with, awesome quality and nice sealing...
@putteification
@putteification Жыл бұрын
Easy to install and solder even to coax with a hard jacket. Excellent price to quality ratio.
@ny4i
@ny4i 3 ай бұрын
I'm glad i watched this eventually. :) I just saw the hint about making the 5mm cuts in polyethylene cable (of which POTA Flex 7 is). That explains why I had so much trouble getting the silver component into the cable.
@rotti163
@rotti163 Күн бұрын
It's easy to insert without cutting. Use a short length of aluminium tube to push it in to the jacket
@ny4i
@ny4i Күн бұрын
@@rotti163 This comment is specifically about this cable The manufacturer s stating how to do it with either cutting the poly or heating it up. That works. If you are doing it without heating it or cutting on the Poly jackets, I'm sure M&P would love to learn your technique as what they say seems to work fine.
@rotti163
@rotti163 Күн бұрын
@ny4i I'm just pointing out that there is an alternative method. I'm not saying the video is wrong in anyway. It's just the way I did it on my POTA 7
@ny4i
@ny4i 23 сағат бұрын
@@rotti163 OK thanks. When I tried the brute-force it I broke the separator in half so you have better luck than with the poly outer layer.
@rodgerkaskhamsr6600
@rodgerkaskhamsr6600 8 ай бұрын
Very easy, too install. Well desined. Great product.
@VincenzoGagliano
@VincenzoGagliano 2 жыл бұрын
Grazie del video, prodotti top di gamma, qualità e professionalità altissima 👌
@giuseppelacausa1149
@giuseppelacausa1149 2 жыл бұрын
Sono degli ottimi connettori 👍
@Dallas-Rife-UDX-347-Tennessee
@Dallas-Rife-UDX-347-Tennessee Жыл бұрын
Do you have a video putting a PL-259 Commscope type on 1/2 inch Heliax ?
@AG8000
@AG8000 2 жыл бұрын
👍👍
@paulhastings3109
@paulhastings3109 3 жыл бұрын
Will your UHF PL-259 fit on RG-213 do you have a broker here in the US
@MessiPaoloniSRLAncona
@MessiPaoloniSRLAncona 3 жыл бұрын
Hello Paul! This is the UHF PL-259 Evo connector fittining for .400" coax: messi.it/en/catalogue/50-ohm-connectors/uhf-pl/10mm-coax/evolution.htm You can contact GIGAPARTS :)
@barryinn1778
@barryinn1778 4 күн бұрын
These are to hard to solder, you need a microscope to solder them, the holes are to small.
How to Fit UHF PL-259 Solder Male Connector (10mm/.400" Coaxial Cable)
5:33
Messi & Paoloni SRL - Coaxial Cables
Рет қаралды 17 М.
MESSI & PAOLONI EVOLUTION PL-259 CONNECTORS
13:09
Ham Radio Tube
Рет қаралды 8 М.
Challenge matching picture with Alfredo Larin family! 😁
00:21
BigSchool
Рет қаралды 24 МЛН
My Cheetos🍕PIZZA #cooking #shorts
00:43
BANKII
Рет қаралды 24 МЛН
N Solder Male Connector Installation for M&P Ultraflex 7 Coaxial Cable
5:14
Messi & Paoloni SRL - Coaxial Cables
Рет қаралды 33 М.
How to Install UHF EVO Connector (PL259) for POTA-FLEX 6 and RG8X Coax
4:06
Messi & Paoloni SRL - Coaxial Cables
Рет қаралды 3,4 М.
Installing a PL-259 (UHF male) on RG-58, RG-59, RG-8X and others (014)
7:36
Electronics for the Inquisitive Experimenter
Рет қаралды 14 М.
Pl-259 Solder On Installation Guide for RG8X Coaxial Cable Full HD
6:53
Max-Gain Systems, Inc
Рет қаралды 195 М.
How to fit PL259 connector for Coax (Warning: read description below)
4:13
Messi & Paoloni SRL - Coaxial Cables
Рет қаралды 28 М.
How To Install A Crimp On PL-259 to Coax
8:38
Ham Radio Tube
Рет қаралды 57 М.
PL259 install RG8 - LMR400 - RG213
7:42
Tripp Williamson
Рет қаралды 60 М.
Challenge matching picture with Alfredo Larin family! 😁
00:21
BigSchool
Рет қаралды 24 МЛН