HOW TO INSTALL UNIVERSAL FRONT LIP FOR YOUR CAR

Рет қаралды 80,554

Күн бұрын

Thank YOU for visiting my channel!
If you enjoyed this content, please consider to support me by buying me a coffee: bit.ly/361D2kS

Пікірлер: 108

@neoguap 2 жыл бұрын

Finnally someone who can actually produce a step by step tutorial for how to install. People always skip certain parts and that's irritating

@ianfann 2 жыл бұрын

Thanks 🙏

@AngelRivera-lr2yx 2 жыл бұрын

Most useful lip install I’ve seen. Thank you

@ianfann 2 жыл бұрын

Thanks 🙏

@chickenoncheese 3 жыл бұрын

Hey great video! Where can I get this lip? Thanks

@nolimitspodcastt Жыл бұрын

What do I do if I made one side of the lip a little bit higher then the other side

@far-red 3 жыл бұрын

Nice SLX, mine is SLT im not a fan of doing such mod (cos im cheap) but i enjoying seeing other do it to their cars

@damonjohnson6671 3 жыл бұрын

60-100$ on amazon cdn

@2K1Breezy 3 жыл бұрын

Looks very nice👍 , going to get one for my car. Great video👏🏻

@ianfann 3 жыл бұрын

Thanks! 👍

@terrelldean9481 2 жыл бұрын

sorry to be offtopic but does anyone know a tool to get back into an Instagram account?? I was dumb forgot the account password. I would love any tricks you can offer me

@jackbowen8706 2 жыл бұрын

@Terrell Dean instablaster :)

@wonkamywilly2456 2 жыл бұрын

Had this on my forte until I broke 2 of them. Upgraded to the Aerotekk front and side splitters.

@deporcali23 4 ай бұрын

How did yours break if you dont mind sharing ? I installed mine yesturday and broke same day driving 80mph on highway 🤦🏻‍♂️😂 smh

@wonkamywilly2456 4 ай бұрын

@@deporcali23 same and the other time was snow.

@sitirazak8123 3 жыл бұрын

Hi ,can help to fix on my car.bought but not confident to fix on my own.will pay for it..thanks

@ezequielgarcia4591 11 ай бұрын

Hey they didn’t send me the screws could you help me out with the measurements??

@RaoWarriorGaming1194 3 жыл бұрын

Thank you 😊

@imfat8207 3 жыл бұрын

anyone got link to these type on amazon or somewhere?

@deporcali23 4 ай бұрын

Have you had issues with highway driving ? Any cracking ? I installed mine yesturday and now its gone from the middle ( cracked ) im guessing its bc its 4 pcs its not fully solid to be secured enough …. I mean ik its hard plastic but was expecting it to last more than 1 day 😂🤷🏻‍♂️

@adreyan512 2 жыл бұрын

Does affect the humps

@Ttunez83 3 жыл бұрын

Love the car and love your vids! Did you wrap the headlights? And also will you be adding side skirts to the car?

@ianfann 3 жыл бұрын

Thank you so much for your compliment. Yes in fact I did wrap part of the headlights but avoided wrapping the lens in order to comply with the law. And yes I did install side skirts, in future I'll do a short montage of my car and I'll post it on my channel, stay tuned.

@Ttunez83 3 жыл бұрын

ian fann awesome can’t wait! I was wondering if the 2017 Elantra side skirts will fit on the 2017 forte. It’s so hard finding a kit in the U.S.

@mohamedshafiq175 3 жыл бұрын

Hi bro, did you screw it in the body frame or there's already a grove for you to screw underneath the car?

@BNizam Ай бұрын

bruh. It is screwed in the bumper;

@lalhruaipuia6425 3 жыл бұрын

Can i use this on getz car

@gasperblight931 3 жыл бұрын

bro whats your car paint , and tyre rimm spec?, they look great

@ianfann 3 жыл бұрын

Bro, my car is vinyl wrapped with satin gun metal grey, tyre is 17" 225/45 and my rims are stock 17"

@JustMyFish 3 жыл бұрын

It seems to me you’re winning it 🤣

@ClassicAnt 2 жыл бұрын

Can anyone tell me where you get the tag he has hanging from the front? Not that specific one but just those in general…

@kaedensmith8500 Жыл бұрын

they are just fake tow straps

@danieldenev 5 ай бұрын

will this fly away at 250kmh?

@Southsidefulldetail 2 жыл бұрын

Looks so easy im gonna. Uy it to my wife's car

@jaychez5610 3 жыл бұрын

Any eBay or Amazon links to buy one similar to this? I bought one a while back but it’s way different from yours. It came with two center pieces that stack on top of one another but it doesn’t align with my car well...

@ianfann 3 жыл бұрын

Hmm I don't usually shop on Amazon so not sure if they sell it there but having said that, this is a universal lip and there are a few designs in the market for you to choose from and you will need to look at the dimensions, design and fit before you make your purchase.

@jaychez5610 3 жыл бұрын

Thanks for the reply... btw What’s this design called? And around how much does it cost?

@ianfann 3 жыл бұрын

Hmm, there wasn't particular name to the design I bought. It was just called universal front lip.

@jaychez5610 3 жыл бұрын

Alright well I appreciate it. Nice car btw!

@jamilali3695 2 жыл бұрын

Nice video tutorial man :) and by the way i think its called a front splitter, not a front lip, front lip is different to this hahahah

@ianfann 2 жыл бұрын

Thanks for the info

@claytonbugeja6791 2 жыл бұрын

did you make holes on the car bumper to attach the lid? or you had holes already? thanks

@ianfann 2 жыл бұрын

No need to make holes, just use tapping screws and screw to the bottom of the bumper

@robfirestone8442 2 жыл бұрын

Sis you still directly into the bumper frame on the sides? I am attempting to install one on my Kia K5, but want to ask first

@ianfann 2 жыл бұрын

Direct screw to the bottom of the bumper bro

@dreyusalexander718 3 жыл бұрын

I’m mind blown I’ve been using the hook on the Jack piece the wrong way lmao wtfff

@bryan6551 3 жыл бұрын

May I know how the lip is holding? Will it drop out when driving at high speed? And will kenna scrap when driving over hump?

@ianfann 3 жыл бұрын

So far the lip is holding up no issues and doesn't scrap the humps.

@bryan6551 3 жыл бұрын

What about LTA inspection? Got any issue?

@ianfann 3 жыл бұрын

No issues, I passed LTA inspection with the front lip on

@blackpanda7612 2 жыл бұрын

@@ianfann Thanks for confirming the lip is still holding up. For extra safety I'll use extremely strong double sided tape and probably screw in a few more self tapping screws. But have to say this is one of the most straight forward videos to follow. I'm really looking forward to fitting these parts myself. Thank you for sharing

@AlexEpikGamer Жыл бұрын

Do you have to drill to the car or is there holes in your car already? I really don’t know if I wanna drill holes in my car yet

@masonthegreat-1 Жыл бұрын

You will have to drill into the car. The plus side is it’s on the bottom so if you ever take it off no one will know unless they look underneath it

@KeylorSwift 8 ай бұрын

How much should I pay for installation of all this assuming I have the parts. 2016 Chevy spark Fender flares, front lip splitter, rear spoiler, mud flaps, window tint visors, full window tint, wheel cover, bumper fasteners, and paint correction on the hood which has some scratched areas and needs 2 stickers removed with a heat gun. Asked one shop so far and guy said somewhere around 8500. That seems kinda high.

@MMGDres 6 ай бұрын

Bro he overcharged you to the moon, find a small shop or honestly you can do it all yourself with some tools except for the window tint

@MMGDres 6 ай бұрын

If you need help doing it I’d be willing to help through the phone I’m 20 been a car painter for 3 years and know how to buff/ bodywork etc pretty good

@tumelokhesa3012 Жыл бұрын

Installed mine with not enough screws and it flew off while driving....

@mikeymike3910 Жыл бұрын

there's a big Gap though at the sides 😩

@MahaloFitteds808 3 жыл бұрын

Does that lip come with pre drilled holes?

@ianfann 3 жыл бұрын

Nope it doesn't

@metals99 3 жыл бұрын

I installed mine thanks bro for the guide! I am just concern if I should take the lip out during LTA inspection. Would you think this will be a concern? Thanks!

@ianfann 3 жыл бұрын

Hmm I don't think it would be an issue during the inspection

@iamsyrox7218 3 жыл бұрын

Can u send the link on where u bought it

@ianfann 3 жыл бұрын

Link to buy : bit.ly/3sXNBOJ

@indosinfamilyreview 2 жыл бұрын

Hi sir, did you pass your inspection for installing this ? TIA

@ianfann 2 жыл бұрын

Yes inspection pass.

@UziSal 3 жыл бұрын

Can it fit my 2015 mazda 3 sedan?

@ianfann 3 жыл бұрын

This is a universal front lip, but you will need to consult with your seller on this.

@UziSal 3 жыл бұрын

@@ianfann does universal mean fit all car?

@ianfann 3 жыл бұрын

Yup it should fit most saloon cars but please check with your local seller before buying.

@JackRR15 2 жыл бұрын

Idk how fast you guys drive but tape and self taps have never worked for me. Always had to use nuts and bolts.

@ianfann 2 жыл бұрын

nuts and bolts would be more secure

@itz_tsmooth1105 3 жыл бұрын

Can you send the link

@ianfann 3 жыл бұрын

Link to buy if you are in Singapore : facebook.com/superdbealsg/

@fabiancarrillo1134 2 жыл бұрын

Hey brother how’s it been holding up since?

@ianfann 2 жыл бұрын

I’ve since taken it down as I got into a small accident and it cracked

@angelicatenoso 2 жыл бұрын

What is the name of the equipment did you use like a gun? Thanks

@ianfann 2 жыл бұрын

You mean the heat gun?

@isaiac165 3 жыл бұрын

It's definitely way too wide for your car. Maybe need to cut/modify to bring the sides in. Looks like your car has front mini wings.

@ianfann 3 жыл бұрын

Hmm thanks, I might look into changing a new lip

@Teramydog Жыл бұрын

why are you wearing a mask along in the garage?

@xbrojasx2749 3 жыл бұрын

Where the link to get it

@ianfann 3 жыл бұрын

Link to buy : bit.ly/3egJFVt

@aaronamix5462 2 жыл бұрын

@@ianfann Link inactive.

@ianfann 2 жыл бұрын

Hmm looks like the seller has stopped selling.

@aaronamix5462 2 жыл бұрын

@@ianfann Watching your video. Good job. Kindly do a follow up so we can know how it performed after some months.

@ianfann 2 жыл бұрын

Ok sure 😊

@MrFamilyMoments 3 жыл бұрын

You should of took off your bottom stock lip on bumper first. Blocking your lip

@iaj7517 3 жыл бұрын

Great instructional video! You didn't need the music during your explanation! It is annoying! Otherwise great job!

@LenzShankz 3 жыл бұрын

installed on my bmw last week. completely ripped off and shattered to pieces when reaches 160km. this thing is not for speeding. btw nice vids.

@ianfann 3 жыл бұрын

Hmm, did u install lots of screws?

@xbrojasx2749 3 жыл бұрын

Bruhh 😂😂😂

@casuallycycling9339 9 ай бұрын

Lmao. That’s what always comes in my mind when i see these things. Like it’s a plastic with little screws on another plastic, any real downforce on the car and it will rip off immediately. Aftermarket lips are only for looks/ aesthetics.

@zeeunveil1324 Жыл бұрын

the bottom has to go in first... you have it reversed

@wopee1 3 жыл бұрын

🤣🤣🤣🤣👌

@jms7585 2 жыл бұрын

Step 1: use a better jack!

@zbyneksurovec 3 жыл бұрын

why are you barefoot tho..

@RiBA__ 3 жыл бұрын

Is it illegal? did your feelings get hurt? are you losing sleep over this? wtf do you care if a person is barefoot or not, ur saying it as if it’s forbidden to be barefoot in a video. this man just provided you a tutorial in which you can learn to install a splitter to your car and all you care about is this guys feet.

@noahjohnson932 3 жыл бұрын

@@RiBA__ damn bro calm down lmao

@brianwasmund7568 2 жыл бұрын

I'd love to have a shop that clean enough that I could go barefoot

@zepp3lin Жыл бұрын

Shoppe selling it cheaper than amazon.

@konarider1469 3 ай бұрын

You don’t have this lined up correctly at all. Especially the ends. They should line up with the edge of your wheel well not stick out a mile.

@setdetnet5001 2 жыл бұрын

It's not right, looks silly, way too wide. That's because it's universal. Better off spending a few more quid to get a custom fit which looks way much superior