To be honest I literally just found you and the way you explain stuff is so good. Keep up the good work !!!

THIS IS PERFECT, thank you so much for not wasting time, best video on this subject I can find, about to upgrade a Colbolt with this kit and this was SUPER helpful, I will be checking out your other videos.

I really like this video, you explained all this very well, no filler, no BS. Much appreciated! I am about to do this job on my 04 Honda Civic DX, I'll have power windows for the first time! (11 years with this car, still running great). Cheers mate!

I like how clean and very clear you are when you explain everything, Thank you 👍🏿

I've been considering these for a while now. Thank you for the in depth video I will defiantly be ordering them

Awesome video. The makers of this kit should of definitely payed you for doing this video. I'm sure I can speak for 90% of the people in these comments your video convinced me to buy this kit.

I didn't know this was an option! I'm glad you shared! We have an '05 work truck that would be nice to have this in!! Thanks Ryan!

Excellent thank you. I was looking at this kit for my 1995 Land Rover defender 90. Now am going to give it go. Great video. 🙌🏼

I wasn't planning to do this in my Solstice, I was watching your power locks actuator video and this one auto played by accident and now you've convinced me. Good project for all my free time!

I am super grateful for how detailed you are. You are giving me a lot of confidence to try this myself.

Now this is what I call a good instruction video ⭐⭐⭐⭐⭐

Great video 👍 just ordered 2 sets one for my 91 honda crx and one for my 89 hatch back civic 😎💯 cant wait till they get here looking forward to this conversion

Great video! I'm just about to install this same kit on my s10 and found this video very informative.

I installed one in my car works pretty well I enjoy having power windows over my old cranks.

This is an excellent video. Clear and concise.

Very thorough walkthrough. Bless you sir

Such a wonder fully made explanatory video highlighting all aspects, makes it simple for novices, like me, to grasp and understand

Dude great video, I was looking for a tutorial video to install one on my tacoma, I’ve been doing some stuff to it, security dash cam, led lights in the bed, backup cámara and next will be this, thank you and GOD bless keep up the good work.......

Imma be honest, I didn’t need to know this information. Stayed because you did a great job breaking stuff down. 😂 I will probably never have to do this, but I stayed liked and commented. Thank you for your hard work

Thank you so much for the video, can’t wait to do my truck 😎

Thank you sooo much for this 🙏🏽 I was actually contemplating going to my local junkyard, removing and purchasing 4 door panels for the same vehicle that had power windows. This is much simpler, cheaper and less time consuming! Especially since I have to keep checking for the model and wouldn't know until after installing if they even work!

I was hoping this would come along 👍👍👍 I already install the tailgate assist ,door locks lol

Perfect explanation, thank you!

Good video. It was informative and Finnertaining. There was a section in there where you videod your hands and Finners which is usually hecka irritating to me but this was not. Thank you for doing such an informative video, you helped make my choice for my window actuators and the Finnershed product looks really good. All joking aside, killer video. thank you.

Excellent video. Very easy to follow and you described everything very well. Thanks. I used a similar kit on a Frontier I had back in the day after I got tired of manually cranking open the windows. LOL.

Simple and brilliantly explained 💕

GREAT VIDEO AND GREAT UPGRADE. I have the same truck. Keep u the great videos man. Big fan.

Great Video, just what I needed to guide me through fitting mine :-)

Thanks for this... I used to put these in new dodge cars in 1990 and 1991 when I worked for car stereo company... spal was the brand, amazing they are still the same, this was the best kind then and I still believe now.

That’s pretty dang slick. Great find and very good information. I should see if there’s room in my little Nissan work truck. I’d happily spend that to go from manual. Getting lazy in my old age. 😂

Very good video Easy to flow GREAT JOB Thanks

Outstanding!!!!!!!!!!!!

Excellent video. There’s a 2019 F250 crew cab work truck with the diesel engine and a whopping 7 miles that my local Ford dealer wants to sell for $35,000. The truck has no power windows and no cruise control. It seems that those two things can be added for fairly cheap. I don’t care if they don’t work the same as factory as long as they get the job done. $35K for a diesel work truck that’s brand new and can be converted to a fairly comfortable truck is starting to sound really good.

Brilliant, thank you

Wow great video 👍🏾

Great dude, thanks.

very good video. im gonna buy this for my ford f150. thank you.

Merci beaucoup pour votre vidéo.... J'ai une voiture ancienne. Cela fait un petit moment que je cherche à installer des moteurs électriques pour les vitres de mon véhicule. Je ne savais pas trop où chercher. Mais là c'est une révélation. Encore merci.

Great video man I wanted to let you no I couldn’t cover the old window handle so i made it were it could fit back so it looks manual up and down.but i have the new power switch installed in some blanks that was in my dash.wasn’t fun getting them to stay in place lol.

You're the best 👍

I think I will copy all your activity. It is exacting what I was looking for but for my old Alfa Romeo Duetto Spider 1989!

I suggested this product to my mother-in-law for her older car. She purchased one from Amazon and it did arrive fast but when we opened the box, the parts looks like it had been used before. Seems like they have sent a “returned” item. The white gears and risers were dirty and greasy, some of the screws & rubber bushings are missing. Even the power window motors are dusty and scratched. We are communicating with the seller but it has taken a lot of emails back & forth. We sent them pictures of the parts and lately pictures with circled notations. They are probably figuring out either to send a brand new box or just replace the missing and dirty parts. Hoping to get this sorted out so that I could install it this weekend. Btw, I installed the Keyless Power Door Locks without any problem. Awesome video tutorials and keep it up!

excellent tutorial

Great video.

Thanks new subscriber!!!

Thank You ...

Very cool thanks

great video

Good video

thanks for your video is very nice explanation

Awesome video…. was looking for a way to somewhat “modernize” my 1988 Mitsu MM pickup… had no power options whatsoever Edit : power steering

Thanks brother, am connecting my L200 mitsubishi tomorrow. 2020

😀great har

I just did this today. Thanks for the instructions! I used a fuse tap for the power. Ford has a 15v fuse for power wondows and sunroof even if you don't have those options lol.

Could you please show how/where to connect the red wire to fuse box, that’s literally the only thing I can’t find anywhere

I use the wiring and the switches from the kit. I use the oem power regulator and use a pig tail to connect to that aftermarket one.

Great video. It will make my job much easier, *but* I wouldn't put the switches in the door pull like that. You can't put your hand into the pull, and on a windy day you need to hold on tight.

Sar best video

So cool

Great tips on removing the window handle. Sure hope those motors last longer than GM factory ones. Are there clips for removing the door panel? Like plastic push and pull ones?

Are they still working properly to this day? Great video man!!

lol now I'd like to see you close the door, I probably would've either grabbed a power window door panel from the junkyard or cut holes in the blank space above the door pull, but to each their own.

Recomend lubeing the rails on your window make it easier for the motor

Just use a cloth to remove the window crank, I normally use an old sock. Wedge it in the gap and just pull the sock until it hits the wire and just keep pullig and viola.

Great video! Absolutely supreme detail! I have the same truck ('01 Sierra) I bought the same kit and I'd REALLY REALLY like to know where you got your 12V ignition power. I'm going to do this install, plus the power door lock install you did soon (weather permitting). Thanks so much!

I have a question. If my truck has manual windows, and I installed factory power window buttons, could I run the wires, after they are ran to power/ground to the factory switch buttons? Regardless phenomenal video man!! You gained another subscriber! Thanks for posting a how to video the right way!

Nice video. I would add a relay with power directly from battery and have the ignition act as the signal.

I wish someone did an in depth video on the wiring part, that seems like the most complicated part.

great video. So a year after, how is this kit holding up?

How do you "connect the last red wire to the fusebox for ignition power"? How does that work? Are there terminations for bare wire at the fusebox? Does the wire have a clip or connector to plug into the fusebox? Ive done a lot of work on my van but nothing electrical yet. Great video, though! I learned a lot!!

Great video, the only thing I would do differently is add a relay for the power to the unit, use the ignition to trigger the relay.

Good.explanation.thanks... Is there anyting weakness form.this kit...

Great video. How are they holding up?

Hi great video I wanted to ask if you might know if i can take the electric window motor and all of the mechanism from one car and install on another car . For the matter I’m asking about a mazda lantis 333 i have two of them and the newer one doesn’t have power windows while the older one has them. Do I need to take some of the wiring too?

Can you do an update video on how the power works are working?

Is there a switch for the passenger side ,so your passenger can control that window ? Never mind i saw one in the parts illustration. Great vid btw.

Wow beautiful job on your video and you installed it on my very vehicle. Now were you mounted the switches doesn't it get in the way of you closing the door.

I need to know where to connect the wires

Holy shit!

If you got a stock switch for the vehicle could it work with that with some modifications

I installed this type of conversion a couple of years ago and they both have started to fail. So I ordered a set of replacement power regulators from A1 Auto for $75. Since I already have the switches I will just use them. You can get a set of universal switches from Amazon for $26. Yes, you will spend a little more if you buy the actual regulators and a set of universal switches, but you will get a superior product with better performance and reliability from the actual regulators. You will have to remove the manual regulators and install the power regulators. The good news is that the mounting holes are already there, so no drilling. Look for a video for your specific car or truck They run up and down smoother and not as jittery and noisy.

which this brand u used

Does it fit in wrangler 2008

Whats the dremel adapter u used to make the window crank whole bigger??

I bought a replacement window crank at auto zone and the teeth that grabbed the crank didn't last one turn. I'm concerned if the plastic quality will be strong enough to maintain hold on the door crank?

If i were to grease the window mechanisms will it still make noise

Hi what’s that tool called to disconnect the handles please

Question are these switches removable to install into a factory trim piece?

Such amazing stuff...could i buy 2 of these set for my toyota 4 door pickup ??

Can this use in conjunction with the manual winder as backup instead of the blank piece?

They are out of stock do you have another model you can recommend? Thanks

Can we just wire it from the speakers?

Hello man !! Did you use relay ?

Where did you connect the ground wire. I followed these exact steps. I connected the power wire to the ignition fuse and when I connected the ground wire to metal it sparked and blew the ignition fuse.

I bought a kit like this with lit up buttons, I rolled the window up and it was having a hard time then it stopped. Lights went out and I heard a pop. The in line fuse wasn't popped, and I'm plugged into an IGN port. No longer works and I'm stumped!

This seems to be a solution for my 2014 Titan S model, which currently has manual windows. However, manually they are quite tight to operate. Is this motor assembly stout enough to handle normal pressure?

I need help placing the red wire

How is it holding up?

How does passenger put window down

Would this fit a Chevy Silverado? 2008 where u order the kit from?