@jimcrawford4413 2 жыл бұрын
I enjoyed this video...I have a 2001 GMC Sierra (best vehicle I've ever owned) with 260k. Going to fix it up with mods like this because I can't see paying 90k for a new one...thnx!
@MarioZermeno 2 жыл бұрын
Thanks, the support means a lot
@SuperBullyone 2 жыл бұрын
you are brave! You just saved yourself $300 dollars
@alfonsogarcia3626 3 жыл бұрын
U didn’t show how to install the needles?
@AtlantaSpeedometer 7 ай бұрын
Mario has done a great job at explaining most everything, but the procedure of needle removal/installation is 100% wrong. I’ve owned a speedometer repair company for the past 16 years(01/15/24). The video was edited from when he installed the needles. The stepper motors on this cluster are magnetic. The unit needs to be powered on during calibration and needle installation. The calibration needs to happen before the needles are removed. The part of removing the needles to the point of reinstalling is incorrect. The cluster must installed and powered on before marking and removing the needles, then install them in the same place when the cluster is powered on. This information only applies for the 99-02 year model GM full size, not for the 03-06/7 classic. 1988-2002 have magnetic aircore steppers and need different treatment than the notorious 03-06 models.
@Checooms 7 ай бұрын
Any chance you can do a video on this?
@AtlantaSpeedometer 7 ай бұрын
Sorry it's not our product@@Checooms
@chadkelley8617 3 жыл бұрын
How did you know where to align the needles?
@alh1007 2 жыл бұрын
He didn’t, that’s why he showing volts
@HF1.0 Жыл бұрын
You need to put a piece of tape down under each needle with a sharpie mark of where the needle was before you pop them off. When you put it back together, you align the needles to your sharpie markings
@jw11432 10 ай бұрын
@@HF1.0 Unfortunately, that won't do much good if you're swapping the gauge face like in this video. I'm guessing the way to go about this would be to take a picture of each needle's position, being sure that the camera correctly captures where the needle is pointing when you look at it directly.
@abrahamherrera1517 3 жыл бұрын
certain way to align the needles?
@twiztid1fiddy 5 ай бұрын
Yes
@Username-ng8jy 2 ай бұрын
lol watch how to set them. That dude Jeff does them.
@Low-bp6xt Жыл бұрын
What’s the link for the turn signal lights
@Hyperrborean 2 жыл бұрын
Your idle sits at 1000? I have an 01 Silverado and she idles at 500 Very random, but caught my eye
@davidaguilarg.7093 2 жыл бұрын
Oh yeah I didn't notice, my 2000 GMC Sierra also idles at 500.
@HF1.0 Жыл бұрын
That’s because he didn’t align his needles back the right way so everything is going to read more or less than what it actually is.
@DieRod Жыл бұрын
How do you change the color for the Odometer/Gear Shifter? Can’t find anything I have a 2001 Chevy Tahoe so I don’t have 2 sodar.
@MarioZermeno Жыл бұрын
So you have to buy a different face plate if you don’t wanna solder, the faceplate has a color tinted film to change the color
@omarvaladez9492 2 жыл бұрын
Question, i know the needles are white . But for them to light up white didnt u have to put in white bulbs ? Or ?
@MarioZermeno 2 жыл бұрын
Good question actually. I know having the white leds makes it 2x as bright I think I’d look at PI clusters IG page for some sample ideas.
@omarvaladez9492 2 жыл бұрын
With that being said u put red leds on ur cluster ? Any luck on figuring out how to get the warnung light/turn signals to light up to your liking
@gotcheese9163 3 жыл бұрын
Looks good
@marcovalle9410 3 жыл бұрын
My gas gauge n oil pressure gauge don’t work now after install🤦🏽♂️ any advise
@MarioZermeno 3 жыл бұрын
Damage to the stepper motors maybe? Any spin at all from them?
@marcovalle9410 3 жыл бұрын
@@MarioZermeno yea they spin just noticed I might have put the needles in wrong
@omarionlewis2362 Жыл бұрын
yea all my needles are fucked.
@alfredoreyes8661 3 жыл бұрын
where can i get the red bulbs?
@cooperaldrige Жыл бұрын
Great video!
@ELponce4423 3 жыл бұрын
Did you use red leds for the t10s or white leds ?
@twiztid1fiddy 5 ай бұрын
T10 they are white the overlay is red
@ruby_z71 5 ай бұрын
Is there any red SS overlays for a 03-06 silverado that have a red screen over the PRND?
@twiztid1fiddy 5 ай бұрын
Yes google 03-06 Silverado overlay
@henrytoledo4103 2 жыл бұрын
Dam that Escalade face is pricey
@luisortiz2531 Жыл бұрын
Where can I find the Escalade lens?????
@elseco2341 2 жыл бұрын
Send the link to the turn signals u didn’t leave a link bro
@JuanMunoz-kf4ll 8 ай бұрын
What year is the after market Escalade lens? Is there a new link for the Escalade lens?
@twiztid1fiddy 5 ай бұрын
2002
@jaimea9151 Жыл бұрын
Did u order just the red and the gear selector was blue on the website but with the red face ?
@twiztid1fiddy 5 ай бұрын
Overlay is red not the bulbs
@oscarestrada4922 11 ай бұрын
4:27 where can I find that size of led for the turn signals
@twiztid1fiddy 5 ай бұрын
T 10
@JMASON-qy7ki 3 жыл бұрын
How much was the kit
@rafaelrosas2918 2 жыл бұрын
Can u put a 120 moh face on that one that reads only 100 mph??
@MarioZermeno 2 жыл бұрын
I think so. they have a option on their website. Check it out
@rafaelrosas2918 2 жыл бұрын
@@MarioZermeno thank u
@miguelrocha6744 3 жыл бұрын
How did you find the red Cluster bro ?
@carlosherrera8541 3 жыл бұрын
In the descriptions
@donyailposey6133 3 жыл бұрын
How u get the display to be red, is the tint?
@MarioZermeno 3 жыл бұрын
Yea it comes with a tint film on the face overlay
@ELponce4423 3 жыл бұрын
Mine came blue is there a way to get a red one do u have to let them know u want red ?
@taronhowell2523 2 жыл бұрын
Where do i order this from
@levilindsey8851 2 жыл бұрын
What color are you leds under the cluster?
@MarioZermeno 2 жыл бұрын
Good question. White
@levilindsey8851 2 жыл бұрын
@@MarioZermeno do you have a link to the LEDs you used?
@nbsaddiction1522 2 жыл бұрын
Would it be same for nbs tahoe
@carlosmillan6400 2 жыл бұрын
99-02 is the same 03-06 is different
@Bryannnbs 3 жыл бұрын
Where did you buy everything links?
@MarioZermeno 3 жыл бұрын
Links in the description.🥱🥱
@Bryannnbs 3 жыл бұрын
@@MarioZermeno thanks bro
@ErnestoDiaz-uy1hz 8 ай бұрын
I saw one on the internet for $20 not sure it's legit.
@davidsilva2318 Жыл бұрын
that overlay is wrong escalade for that generation
@manuelmix1282 2 жыл бұрын
Bro did you really pay $560 dollars for the lens cover because that what the link is saying
@MarioZermeno 2 жыл бұрын
Damn, that’s crazy I went and checked and no I only paid like $95 plus shipping for mine.
@downshiftaddicts366 2 жыл бұрын
This is one expensive cluster build
@MarioZermeno 2 жыл бұрын
It was “cheap” to me when I did it but I see now the prices went up a lot since then
TWA Motorsports
Рет қаралды 20 М.
Tahoe Steve
Рет қаралды 122 М.
Car Wizard
Рет қаралды 1,1 МЛН