Listen to this video while installing the decal, and it was peaceful. I also sang while the birds chirped. A deer came out of the forest, and I fed it straight out of my hands. Some old lady in a hood had a stick. Waved it and said bibbidi bobbidi boo. The decal on my vehicle magically applied itself. She picks up a possum whom she claimed was a rat and turned it in to my own driver. She looked at me and winked. I said, "Why did you wink at me. She said, "Look down. Boys, you will not believe this. I had on glass air Jordan's. GLASS! Can you believe that? Anyway she gave me tickets to a ball so I went. Now I'm a Kardashian. Yes, boys, I married caitlyn Jenner. I was impressed. Hers was bigger than mine. Best video ever. 🥰😍😍😁

The ambient music in the background is peak

Installing today. This one is so much simpler than all of the other ones that I have watched. Thank you so much. I was so nervous, but now I'm ready. Just gotta get some masking tape. Have everything else. Going to follow ur directions to a T. 🤗🌹

whats with the crazy relaxation music. Should i listen to it in my sleep haha

Everything was explained beautifully, but I had a hard time hearing some of the instructions at the beginning because the music was a bit too loud.

Thank you so much for this clear advice, I’ll be doing this in a couple weeks with wide gloss black stripe then thin green stripe on the outside

Great video I do pinstripe but I've never done one this big so thanks again.

Very good and helpful details on installing rally stripes. Thank you!!

For whoever it helps, I've been through a couple of the gloss yellow vinyl stripes. Had them on Mercedes Obsidian Black and Mercedes Selenite Gray Magno for 1 year 3 months and 1year 1 month respectively before taking them off. Both cars were parked outside all the time in direct sunlight, as well as snow and rain. Vinyl came off spotless, no fade, no residue after a wipe down with alcohol. Now I'm applying silver and gold for a change, but you can trust these guys! Oracal 651 is used for the gloss colors, and 3m Scotchcal 50 is used for the metallic colors. To uninstall you can simply peel off as long as the temps are greater than 65 degrees pretty easily. For even more ease, pour some warm water to bring it to 75-85 degrees or use a heatgun. Don't leave on longer than a year roughly to be safe!

Music is “ Max richter “ great stuff when When I work on my M3 Thx for the video !!!

Thanks! Great video! (even with the creepy alien landing music in the background)

Good instructions, my only complaint was that the music caused me to make an appointment for a massage.

This one seems like the much better way then the last 3 videos I watched. Excellent!

Dope! Seen a few videos on this but these is the best one.

Good video apart from the cleaning part. You cleaned the side of the vehicle but fitted the graphic to the bonnet lol.

Perfect video, I’m even working on the same 1st gen Colorado coincidentally lol

I will say it again People that play music when they are TRYING to explain how to do something is BS People cant hear you for one and the Music is Distracting for two so I will find another Channel that can do a better Job with out the Music.

when we have an adhesive side, do we need to apply a heat gun?

The music is a little loud and almost drowns out the voice. Would have been better without the music

The music needs to go. Can't hear the vocals a lot of the time, plus they are way distracting!

What type of alcohol do you use to clean the surface? Also, will that soap and water damage the paint??

Thank you so much for this video . ❤

to much background music. could not hear what was said.

Great tutorial!

Thank you for the video, you didn't mention about the temperature of the surface, does it matter?

Thats looks very nice! How many I will need for Pontiac Grand Prix 2004?

Thanks man don’t wanna ruin my black beauty 💪

Thanks for the video!

What’s the best vinyl to use for vehicles

Is it a different sticker from the wrapping paper? After disinfecting with alcohol, water is used instead of primer adhesion promoter, is it right to use water?

I added those wrap to my MUSTANG SHELBY GT500 now it keep as beast

Does it come off easily?

Does the alcohol remove the wax?

Awesome video

How to apply to interior panels, mojldings, etc

Great installation video for proper and professional step by step process, had to mute it tho. The back ground music was overtaking the instructer's voice and distracting.

Noise in the background is too loud it's hard hearing the the person illustrating put the stripes on

Very helpful video but the music made me feel like I was watching a horror video or something 😂 also couldn’t hear you over the music sometimes

can I do it without alcohol ?

Do guys have place in nc

that guy is right I like the music too

Good video

Thank You!

Thank​ you for the video but I couldn't hear the talking sound, the music is too loud, don't think the music is required for the instruction type of clip because we need to focus on the message you're explaining.

OK thanks for telling me This looks more complicated than I thought I'm glad I didn't attempt on my own

Do i need to meditate at the same time? The music be bussin

I'm thinking about applying racing stripes on my car but it's a on PCP, basically in 3 years I hand it back in and have 3 option 1) keep the car and continue my monthly payments 2) trade it in for a upgrade or 3) hand it in and walk away. So yeah the car is mine in a way but after 3 years I will be taking it back in and the garage want the car back as it was from the factory so can't leave anything on but you can remove the vinyl car wraps easily. I'm just concerned about it leaving a faded mark where the strips were, my car is white it's a 2013 plate. You recommend replacing stripes yearly? Thanks.

verry usefull nice job thanks

Great video tutorial! I never knew to use water when applying graphics. I would just line up, peel back, and lay it down. Had I used some clean water, I could have avoided a few air bubbles I think. Thanks for sharing this.

Very good video, but yes, music was a bit too loud.

Thanks!!!

Good video, nix the music!

👍

What's with all the racket in the background? I couldn't hear a word you were saying.

loose the music in the background great video though!!

Thank you

Every time I watch this, I can't seem to finish it. I wake up hours later face planted on my keyboard. I don't get it. :\

No music when tallking.

Really useful video so thanks, (but could have done without the music).

I can't hear you now that you put the music on here

I never used water because every time I did it always subtracted a year off the durability I been doing this since I was 9

Your plastic is glued to the vinyl so strong it won't separate. Vinyl comes with it, no matter what I try

I really wanna get Viper stripes on my car but I'm afraid I'm gonna screw it up if I do it myself

crazy music

what is this music in the backround? 😭😭😭

Ty

audio mix is useless! The track wouldl work well for 2001: A Space Oddessey"

Music is too loud, but a very informative video

"I am waiting for instructions Master"

Show the bubbles

Freakin Music is way too LOUD, I can't understand the instructions. otherwise , nice video

The music messed it up for me.

Background music is all I can hear sadly

I learned but you need to take the music off

I CANT HEAR WHAT HES SAYING WITH THE WERID MUSIC

The music is to loud!!!!!

It a good video... but that background music drowns out your voice... you can barely hear you speaking

Like someone said 7 years ago, the music is too fucking loud. Should have been remixed 6.9 years ago.

Good video, Terrible audio! The "Spooky" music does not enhance the presentation. In fact, it obliterates in in many places. Just stick with the instructions.. Did not come here to be entertained, but to learn.

OMG what's up with the new age music drowning out the narrator? If I listen to this when I'm falling asleep, will I wake up and subliminally know how to install racing stripes? Please post this without the music.

Why is there a funeral in the background?

Why is he using water

The background music is horribly distracting. Hard to hear the narration.

can't hear a thing you're saying because you've got random fucking pipe flutes smashing my ear holes

Had to turn the video off the music pissed me off, why !

whats with the background music lol, feels like hunted yo.

Why? Why have foreground music on an install video? Having the instructions in a background track makes no sense.

To much static in the back ground hard to hear

The music soundtrack is masking the voice soundtrack. Not good.

Simple, practical video but the massage parlor mood music was totally out of place and distracting.

I couldn't watch the whole video because of that damn music !!!

Sound mix on this is pretty rough. The music is a lot louder than the voice over.

knifeless tape

Lose the bacground music so you can be heard CLEARLY!

great but the music was getting in the way it real sucks

back round music was cool but shouldn't have been in the video

turn off music so we can hear the instructions

I liked the info but, I found myself repeatedly distracted by my minds desperate attempts to make sense of, or imagine some plausible explanation .... as to what on earth the person who added the background track could have been thinking

The relaxation music is distracting smh

what? remove after 1 year to avoid paint damage. guess i am paint shop then.