How to Install Vinyl or Laminate Flooring Over Existing Ceramic Tile

Рет қаралды 760,334

Күн бұрын

In this video we show you how to install vinyl flooring over existing ceramic tile in a home entrance and bathroom. For this project, the goal was to reuse the existing trim so that it would match seamlessly with the rest of the house. Laying vinyl or laminate flooring over existing tile is a great way to upgrade a floor space without getting into messy demolition work.
Make your life easy with these amazing tools on Amazon!
- Cordless Drill and Impact Driver Combo Kit: amzn.to/3DQLLaA
- Cordless Circular Saw: amzn.to/40CSWNi
- Compact Table Saw: amzn.to/3Ye6tJH
- Oscillating Multi-Tool: amzn.to/3RLumGa
- Rip Cut Circular Saw Guide: amzn.to/3DLittZ
- Deluxe Sliding Mitre Saw: amzn.to/3YxFOqZ
- Compressor and Brad Nailer Combo Kit: amzn.to/3XcWIKy
- Folding Work Bench: amzn.to/3lhVOz8
- 5-in-1 Stud Detector: amzn.to/3I6HqlY
- 30-foot Tape Measure: amzn.to/3IgHHTP
- 48-inch I-Beam Level: amzn.to/3YzDWhu
The video describes all of the tools needed for the installation.
Multi-angle ruler for complex cuts: amzn.to/3Y6sf22
Tips & Tricks:
- Create "tapping blocks" out of a piece of flooring to use with your mallet so you don't damage the surface or edges of your new floor
- Investing in a "pull bar" can save time and help with tricky sections during installation.
- For installations over existing ceramic tile, make sure your tile is in good condition. Broken, loose or damaged tiles will not make a good foundation for the new floor.
- Leave a small gap between your new flooring and the wall to allow for expansion. This gap should be small enough to be covered by the trim.
- Make sure your work area is as clean as possible before you start laying floor.
SUBSCRIBE and turn on Notifications so you don't miss any upcoming videos!
Amazon links are affiliated. If you click on it and make a purchase, the channel may earn a small commission. It doesn't cost you anything and helps support the channel. Thank you for your support!

Пікірлер: 428

@DIYDudes 3 жыл бұрын

Check out the closet renovation video here: kzfaq.info/get/bejne/jrSIfLej1tOVo3U.html

@karend.9218 2 жыл бұрын

I’m 1:25 in and I can tell these guys are good at their work. Game recognize game.

@DIYDudes 2 жыл бұрын

Thanks for the compliment!

@pamellaarias 2 жыл бұрын

This is the perfect how-to video. It’s easy to follow, clear and precise, and the handsome hosts are a bonus gem!

@DIYDudes 2 жыл бұрын

Thank you!

@lucyw.mcmellan7274 2 жыл бұрын

This is exactly what I plan on doing in my bathroom update. Very well demonstrated and explained. Thank you very much. 👍🏼

@DIYDudes 2 жыл бұрын

Glad you liked it!

@just_shaeee 2 жыл бұрын

How did it go?

@tinablair6262 2 жыл бұрын

@@DIYDudes the other videos i watched fill the grout lines. Why didn't you fill the grout lines first?

@zaneblane8160 Жыл бұрын

@@tinablair6262 ..same question here..

@fredaapinko6160 3 ай бұрын

Me too

@hanzohattorri2471 Жыл бұрын

Thank you so much for this video!!! I didn’t want to remove our existing tiles in our bathroom. This is very detailed so I will follow your suggestions.

@DIYDudes Жыл бұрын

Thank you !

@ish-shamelwilliams2516 2 жыл бұрын

This is exactly what I needed. The video was well laid out. Gave me the confidence to try this soon. Thank you👍🏾

@DIYDudes 2 жыл бұрын

Glad we could help. Good luck!

@mzwisdom7504 3 жыл бұрын

Thank you. This idea just came to me. I did not want the mess of digging up tiles in a lived in house.

@nothingbutthebest3051 3 жыл бұрын

Yes it’s less mess and speeds up the renovation process a lot as well. Good luck and thanks for watching!

@mzwisdom7504 3 жыл бұрын

@@nothingbutthebest3051 should we use backing on the concert flooring?

@nothingbutthebest3051 3 жыл бұрын

@@mzwisdom7504 do you mean underlayment under the vinyl planks? If so check the recommendations for your flooring but likely yes, ours had a quality one built in and the manufacturer actually recommended not using an underlayment so we didn’t

@mzwisdom7504 3 жыл бұрын

@@nothingbutthebest3051Yes that's what my term meant. We will make a inquiry before installing the vinyl planks. Thanks

@brettcrock 2 жыл бұрын

A few suggestions.... Use a trim bar, not a pry bar. Also, pre tape the end of your trim bar and pry side to side and not back and forth . Also, a large putty knife or dry wall float up against the surface of the wall so that when you pry the trim off, you won't damage your dry wall and put holes and dents in it.

@DIYDudes Жыл бұрын

Thank you

@VeesFunkyAZZshop 11 ай бұрын

you make it look and sound so easy, but in reality one really needs to know what they are doing to avoid mistakes that could cause further damage and issues. speaking from wisdom.

@juliananton7800 3 жыл бұрын

Loved the before tile 😂

@kyfarm 3 жыл бұрын

Really! And there wasn't a thing wrong with it. :)

@tkash1988 2 жыл бұрын

I noticed you did not use anything to level the floor (Ardex, etc.). How do you ensure the underlying grout lines won't become indentations in the LVP?

@DIYDudes 2 жыл бұрын

Our flooring was pretty rigid, so it wasn’t an issue… I’ve done it with thinner floors as well and hasn’t been an issue

@michellethomas6557 3 жыл бұрын

I've installed floor before but there were some great tips in here. Thank you

@rbs1521 3 жыл бұрын

Glad we could help, thanks!

@kiayang1992 3 жыл бұрын

Your video is exactly what I plan on doing to my newly purchased home! Some other videos recommended using underlayment even if the vinyl planks already have an underlayment attached. The additional layer would be to reduce noise since the pre-attached underlayment is usually garbage (their words, not mine). Would you recommend using additional underlayment or do you find it not needed since you're already laying it on top of tile?

@DIYDudes 3 жыл бұрын

Hey. I think it really comes down to the type of flooring you purchase. The product we used was quite thick and the bottom layer's made from a durable rubber material, so we didn't feel that any additional underlayment was needed. The floor is still looking good and there are no issues with unwanted noises or anything like that.

@kiayang1992 3 жыл бұрын

Thanks for replying! That's good to know.

@neilmurphy3239 Жыл бұрын

Good job lads lots going on there with different areas fitting wise looks nice 👍

@DIYDudes Жыл бұрын

Thank you they are still holding up great

@sharonsue441 3 жыл бұрын

I sure wish I could get you two to do my villa floor!! (Sebring Fl.) I will now be searching for a company to HOPEFULLY be as good as you two are!!!

@nothingbutthebest3051 3 жыл бұрын

Good luck and thank you !

@brettcrock 2 жыл бұрын

Also, run the planks the direction of the hall ways. Not side to side if you can avoid. It has better chi or flow.

@ANTHONY-rp3ud 3 жыл бұрын

amazing job guys!! now i need you two to do my bedroom!! lol

@rbs1521 3 жыл бұрын

Thanks, cheer!

@fredaapinko6160 3 ай бұрын

Nice,I am trying to put stick on tile on top of tile in bathroom and laundry area.hope I can do this instead of sand the floor down before installing stick on tile please

@DIYDudes 2 ай бұрын

Thanks for watching. Check the manufacturer’s recommendations on the tile… it might not stick to certain surfaces good luck!

@danielletabone7731 Жыл бұрын

I finally found a flooring I like after looking at samples from several companies but my son is telling me the 12mm is going to raise the floor too high off of my new tiled floors. I just built my house and hate the tile is the thicker laminate an issue?

@DIYDudes Жыл бұрын

No I don’t think so. I would just consider the trim tie ins and the changes in elevation to what ever floors it ties in ton

@xKris93 3 жыл бұрын

Man that was satisfying to watch

@DIYDudes 3 жыл бұрын

Thank you!

@edengills6609 11 ай бұрын

I love this flooring! Could you share the brand and where you got it from please ?

@Mel-mn9fq 2 ай бұрын

Great job guys. Weren’t you worried about the grout lines translating into the vinyl plank. Did you use a specific type of product to prevent this. Appreciate your advice. Thanks

@davidhanda4130 3 жыл бұрын

Good video

@DIYDudes 3 жыл бұрын

Glad you enjoyed

@classiseverything2me 3 жыл бұрын

Excellent work!!!

@DIYDudes 3 жыл бұрын

Thank you! Cheers!

@upulaherath7204 3 жыл бұрын

Crystal clear man, so good, peace! ✌️

@nothingbutthebest3051 3 жыл бұрын

Thanks Glad you liked it!

@yususfsayanisayani8579 3 жыл бұрын

Great job good way to Explain thank you gays

@nothingbutthebest3051 3 жыл бұрын

Glad you enjoyed it!

@peterparker7488 2 жыл бұрын

*gayz

@katerinalallouet2874 3 жыл бұрын

Great work! Looking forward to part 2

@jdmb03 Жыл бұрын

Always leave a 1/4" gap between tile and wall/fixture to allow for expansion.

@enriquevalladares5071 3 жыл бұрын

Profesional work

@DIYDudes 3 жыл бұрын

Thank you!

@wandakowalski7063 2 жыл бұрын

Great video! It would have been nice to learn what kind of tile you used!

@DIYDudes 2 жыл бұрын

Thank you… they were a life proof brand purchased at Home Depot

@arper2000 2 жыл бұрын

Great job Boy’s 👍👍👍👍

@DIYDudes 2 жыл бұрын

Thanks!

@ShahilaToronto 2 жыл бұрын

Amazing..great job

@DIYDudes 2 жыл бұрын

Thanks!

@necurrence1776 Жыл бұрын

I'm pretty sure the laminate will rattle without an underlayer of foil to even out the tiles. It's amazing how many "How to's" you can find these days that miss important topics. But good for you, you're making money even without knowing all these things.

@DIYDudes Жыл бұрын

Underlayment is built in to the tile and would be against manufacturers recommendations. The flooring has been installed for about two years and functions perfectly. Thanks for watching

@katz103 Жыл бұрын

Thanks! Great information!

@DIYDudes Жыл бұрын

Thank you!

@brettcrock 2 жыл бұрын

Also. Try and start and end your runs with larger pieces. You can do this by laying out a dry run or simply measuring and subtracting length off the longer beginning or end piece to even it out. It looks very professional and can make a huge difference.

@nodrama490 2 жыл бұрын

I’m about to to lay down vinyl flooring and that’s a great tip thank you

@DIYDudes Жыл бұрын

I agree

@lydiakotak181 3 жыл бұрын

Thanks , you make it look simple!

@DIYDudes 3 жыл бұрын

Thanks for watching!

@simplengbuhayvlog-t8q 2 жыл бұрын

Smooth and perfect..

@DIYDudes 2 жыл бұрын

Thanks!

@liverbird46 2 жыл бұрын

Excellent job. 👍

@DIYDudes 2 жыл бұрын

Thank you!

@keithhicks3358 2 жыл бұрын

Great job 👏🏽. Thanks 🙏🏽 for sharing . This is a great idea 💡.

@DIYDudes 2 жыл бұрын

Thank you!

@stevesharp3813 3 жыл бұрын

Nice job. Clear and simple instructions! thanks

@nothingbutthebest3051 3 жыл бұрын

Thank you!

@lindadavis3098 3 жыл бұрын

Beautiful? Great job

@DIYDudes 3 жыл бұрын

Thank you!

@brettcrock 2 жыл бұрын

Also. One absolute main point that isn't mentioned is that there warranties on these planks and depending on the thickness or "mil" size , and if the planks already have backing then you may or may not need "underlayment ". "Thin ply" , to smooth the subfloor is a required instruction to obtain the vinyl planks guarantee and or warranty if a problem should arise for any reason. Ultimately, it's much wiser to buy the good stuff with the backing so that you can avoid the "thin ply" . Infact, thin ply underlayment will VOID the warranty if the vinyl planks have this backing. If they don't have the backing, then NO THIN PLY UNDERLAYMENT WILL VOID THE WARRANTY. So read the box carefully before you make you decisions.

@wendywendy6270 3 жыл бұрын

Ecelent idea 💡🤔👌😄♥

@DIYDudes 3 жыл бұрын

Thank you!

@brettcrock 2 жыл бұрын

Also, you can save a lot of time and caulking clean up if you pre caulk the back top of the trim. So that when you press it in place, it will caulk your trim . Test one piece with the bead of caulk and practice till you get the right amount at the right height of bead placement.

@DIYDudes Жыл бұрын

I could see that being tough … and might try it though

@samirasfar7803 2 жыл бұрын

Thank you so much for your video, my question what about the tile level,

@DIYDudes 2 жыл бұрын

Tiles need to be level. Thanks for watching!

@christophermendoza1497 2 жыл бұрын

Should you fill the grout gaps to level off the floor before installing the floating vinyl tile? Or Should you lay an underlayment? Or maybe it is not necessary for either? haha TIA

@DIYDudes 2 жыл бұрын

Follow the manufacturer recommendations regarding under layment… ours recommended not using it because it was built in… If your plank is pretty rigid I wouldn’t worry about filling in the grout. Thanks for watching!

@richardbolton1461 3 жыл бұрын

Great video. How “deep” are the grout lines on the existing floor? I’m looking to do bathroom and have a similar existing floor. Are there any issues w the grout lines?

@DIYDudes 3 жыл бұрын

Hey, glad you liked the video! A typical grout line shouldn't have any impact as long as it’s installed correctly and recessed below or flush with the existing tile. A small gap like a grout line isn’t really enough to have your floor considered not supported. That said, if you did have an unsupported floor you could get some noticeable bending or bouncing in the floor. If you needed to fill a small gap or other hole in the the floor you can use a cement based self levelling floor product. For our project, the grout lines were standard (recessed) and the existing tiles were in good condition. Overall the new floor is performing well without any noticeable bending, bouncing or other issues.

@richardbolton1461 3 жыл бұрын

@@DIYDudes Thanks for getting back to me, very much appreciated.

@DIYDudes 3 жыл бұрын

@@richardbolton1461 No problem... good luck with your project!

@steverichardson4793 3 жыл бұрын

Hello, I had the same question : ) So no problem with a typical grout line, that's good point. Could it be bad after a time thought (months or years later ?)

@justinthomas8451 2 жыл бұрын

@@steverichardson4793 yes it will be a problem after time. I would put self leveling compound over the tile. Otherwise you will most likely void manufacturers warranty on the product and will have issues later

@gjones6445 3 жыл бұрын

Don’t you have to feather finish the old grout joints to avoid the vinyl flooring telegraphing eventually??

@nothingbutthebest3051 3 жыл бұрын

Our floor was very thick and rigid with a quality built in underpad and the depression at the Joints was minor, based on that we didn’t think it was required .. tbh I’m not sure that telegraphing actually does happen, I’ve only ever heard of it but never seen it.... maybe in a very thin floor like 2-4mm??? Have you ever seen it happen?

@brettcrock 2 жыл бұрын

Feathering applies to dips and large divets in the floor. Especially on the sub floor or laminate, where there is cracking or uneven surfaces. You can just use floor tile self leveling mortar or haydyte, which is self leveling concrete used between apartments to dampen sound and strengthen the sub floor.

@brettcrock 2 жыл бұрын

Again, the region of the build matters a lot when it comes to proper preparations and specific outcomes.. If the ground moves a lot, like in clay, then it would probably save you some heart ache later. . Haydyte would be the best option because it thins really well and self levels and set up is quick! You can pour and spread with a large squeegee. Take trim off first . It will level and spread to the side and fill in on its own so don't force it in the edges or it could possible cup as it dries .

@stankudlats3184 Жыл бұрын

@@nothingbutthebest3051 oo

@theresad1904 2 жыл бұрын

Just found this and I’m so excited so my big living area is all rectangular tile can I still use this method in a bigger area? Will the grout gaps mess with the new floor?

@DIYDudes 2 жыл бұрын

No they haven’t. We used a really stuff flooring. It might be a problem with the really thin flimsy stuff. If your worried you can fill them in with a mortar skim coat

@southeastcoastalphotography 2 жыл бұрын

I have a question about starting in the closet, why did you start there instead of in the foyer so that your half planks would be over there instead of a smaller piece where you actually see it all the time? I would think it would be make more sense to have the half pieces by the door just stylistically. Also I may be a little OCD so it might not bother most people. Thanks for the video I have hideous pink tile in my living areas and this makes doing something about it look doable.

@DIYDudes 2 жыл бұрын

The way the tongue and groove of the flooring joins together you need to start in a corner of the room and work your way across and over from there. Good luck!

@georgycolson9671 2 жыл бұрын

looks gorgeous~

@DIYDudes 2 жыл бұрын

Thanks!

@conniepleasantnails Ай бұрын

I am curious, is this tile you installed “luxury vinyl flooring” with a thickness of 6mm? I am considering using the same method in my small business. I found a beautiful product Lowe’s that I would love to use. I also noticed you didn’t fill in any grout lines in the existing ceramic tile. Is it because of the thickness of the vinyl flooring? Thank you

@jasa31 Жыл бұрын

This is great , a question please what is the floor tile is not even . what can one do . or is it ok to just lay out the planks ?

@DIYDudes Жыл бұрын

If the tile is not even you will need to make it even by removing select tiles or evening out with mortar It depends how bad the change in height is

@SirPrem8 2 жыл бұрын

I have a basement that has existing tiles. Some of the tiles are broken, they're not the thick ceramic types. But the cheaper thin home depot ones. I want to retire with the wood style vinyl tiles. Can I lay ot over my existing tiles? Also would I require some sort of glue? I noticed your tiles didn't have glue underneath? Great video btw, 🙏🏽♥️

@DIYDudes 2 жыл бұрын

Thanks for watching. If your concerned about your tiles breaking or continuing to break I would not law vinyl tiles over top as the floor will continue to crumble under the vinyl tiles and cause issues. Any vinyl or laminate flooring must be installed on a solid/level surface

@FrshPrnc598 2 жыл бұрын

What would you recommend for putting vinyl over uneven tile?

@DIYDudes 2 жыл бұрын

Just a thin set mortar…. Sand the edges when it’s still moist with a wet sponge

@allenmundia 3 жыл бұрын

Please include all the tools and vinly flooring you use in this video. I would like to build my washroom same as yours

@klinemiceli2838 2 жыл бұрын

Great video and job...👍

@DIYDudes 2 жыл бұрын

Thank you!

@anthonycordisco918 3 жыл бұрын

Can you recommend a product going over existing tile for a bathroom at a beach house (high humidity)

@nothingbutthebest3051 3 жыл бұрын

Anything that’s advertised as water proof or luxury vinyl plank would be best. Water proof is best any thing advertised as water resistant will still swell at the joints as those floors have a wood material core

@nicolaslair42 Жыл бұрын

After a few months, you don't see the lines / joins of the titles through the vinyl?

@DIYDudes Жыл бұрын

No that might be the case with very low quality thin floors but any normal flooring should be fine. It’s been installed for 2 years with out issues

@ElieAbouzeid 11 ай бұрын

Is there a need to put any underlayment between the ceramic tiles and the vinyl? Maybe for humidity?

@lolli2943 3 жыл бұрын

Is there a video of anyone using adhesive with vinyl peel and stick ? Mine are not sticking... but I don’t know how much adhesive to put on each tile

@DIYDudes 3 жыл бұрын

That's a good question. We haven't gotten into that yet but sounds like a good plan for a future video. Hopefully someone with the right experience will see your comment! Cheers.

@scottio40 3 жыл бұрын

use a spray can of carpet adhesive... works every time ))

@kellybryant6207 Жыл бұрын

Can this be done over existing laminate tile? I'd like to cover and update to a lighter faux wood instead of the dark faux wood that is there now..

@DIYDudes Жыл бұрын

Yes definitely could. It is very easy to remove existing laminate though. It’s a bit more work but you might be better off.

@sholadalcampbell5073 3 жыл бұрын

Would there be concern for moisture developing underneath?

@nothingbutthebest3051 3 жыл бұрын

No shouldn’t be a problem unless there’s a flood.... the joints on this floor are water tight

@jainvikas8 3 жыл бұрын

Is it possible to lay a glue-down version of LVT on old ceramic tiles? After laying if there is damage can that be repairable easily?

@DIYDudes 3 жыл бұрын

Yes as long as the glue has a clean level Surface to adhere to. Thanks for watching!

@jainvikas8 3 жыл бұрын

@@DIYDudes Thanks, but will it damage old ceramic tiles, when repairing the glued LVT or is it better off using click LVT?

@kellyrace4264 9 ай бұрын

Looks amazing

@DIYDudes 9 ай бұрын

Thank you!

@M_Ladd 3 жыл бұрын

Why did you have to remove the rails? Where you installing another type of door?

@nothingbutthebest3051 3 жыл бұрын

Hey m Ladd. Good eye! We actually did an awesome open built in closet! kzfaq.info/get/bejne/jrSIfLej1tOVo3U.html check it out

@paulstephens9274 Жыл бұрын

Guys - old GC here did lousy job with 2x4” tiling my backsplash having major lippage. Will try Prism grouting in to see if helps otherwise need cover. Thought of Venetian texture or micro cement overlay. Or do what y’all be doing with vinyl. Have a sheet to use or could get Traffic master 12x24”peel&stick VT and do a skip trowel texture over Thoughts?

@dopenesskid Жыл бұрын

I'm trying to do this to my living some tile is crack will I have any issues

@DIYDudes Жыл бұрын

I would remove the cracked tiles and refill the gap with self leveling cement? You need to have a solid non moving base

@deanabossio3091 8 ай бұрын

Looks very nice. Just curious as to why no use of adhesive? Thank you!

@DIYDudes 8 ай бұрын

It’s a floating floor so it’s designed to be able to move (expand and contract slightly with temperatures). Glue would stop it from moving and the joints would separate over time

@Ed_Gein Жыл бұрын

so laying over the grout lines wont be a problem for stability? in a small bathroom 6x6 floor is it too difficult to use full size planks to move from therre into the adjacent bedroom?

@DIYDudes Жыл бұрын

No issue with stability. And the transition is ok between rooms. With the big planks. Good luck!

@tonyizor 3 жыл бұрын

Love the look of those tiles..can you post a link here to them? Thank You!

@nothingbutthebest3051 3 жыл бұрын

Hey tony sorry but I can’t find them on the website, we got them from Home Depot. Hope that helps

@giannascarpelli7256 2 жыл бұрын

We are doing this in our bathroom. What do you recommend doing about the tile that meets up next to the tub? Leaving a 1/4 inch will leave a gap and instructions say to use this compressible foam and a silicone sealer over it to waterproof so how would you cover this without looking terrible?

@DIYDudes 2 жыл бұрын

Leave a 1/4” gap install piece of pvc quarter round trim to cover the gap (pvc won’t mold like wood) and silicone the edges to prevent water getting under. If done this before and it looks great

@kenkobra 2 жыл бұрын

Looks really good. Next time, break the toilet into two pieces to make it easier on your back :)

@DIYDudes 2 жыл бұрын

Lol thanks

@aimanharith1248 3 жыл бұрын

Good video 👍🏻👍🏻

@DIYDudes 3 жыл бұрын

Thanks!

@shibainudegenerate7129 Жыл бұрын

If I was doing this in the kitchen and only going as far as the kick boards should I use adhesive for stop the tiles sliding or separating

@DIYDudes Жыл бұрын

No. Don’t glue it down, it’s meant to float. You’ll have to use a small trim board to cover up the gap at the kick plate. Good luck!

@shibainudegenerate7129 Жыл бұрын

@@DIYDudes thanks 👍🏼

@DIYDudes Жыл бұрын

No problem!

@mesawolfpack Жыл бұрын

Question, can install wood laminate flooring over a previous grouted floor after lifting the ceramic tile. The grout is flat. Or do you get the grout removed, big job!

@DIYDudes Жыл бұрын

If the floor is level and solid you can lay on top of it. … if you e already removed the tile I would go ahead and remove the mortar bed as well

@mitchelblaser5232 3 жыл бұрын

Awesome video! I am actually installing the same vinyl tile. I was wondering if I have to cut one side of the line when using the miter saw. I am thinking that if I cut exactly in the middle, the thickness of the saw blade will make the cuts slightly less that exactly half. Thank you!

@nothingbutthebest3051 3 жыл бұрын

We just cut it right in the middle, we had 1/8” split between two pieces so 1/16” off of each half. The amount is so minor you can’t even tell, good luck!

@nothingbutthebest3051 3 жыл бұрын

1/8” being the width of the saw blade

@AmatriceBand 2 жыл бұрын

A question. If the ceramic tile floor is not level , then it needs to be levelled for the LVP. Is Using self levelling concrete to do that ok ? Also is having an underlayment necessary under an LVP ?

@DIYDudes 2 жыл бұрын

definitely a self leveler is your best bet for leveling out the floor....... Regarding the underlayment check with your specific floor manufacturer but likely yes at the very least for sound dampening.... if there was no underlayment or no built in under layment the floor would be very loud to walk on.... good luck!

@Moriahcs1 3 жыл бұрын

The tile that was installed in my house isn't very level, not terribly uneven but enough that if I ran a chair across it it would catch in some places. Will that create issues for the vinyl installation? Also, the tile is large and fairly thick leading into carpeted rooms. If I install vinyl over the tile will it be too high to sit next to the carpet? The vinyl flooring is about 1/4 in thick. Thank you

@tannytate1 3 жыл бұрын

That's my worry with installing this too. I dread the thought of removing my old tile, but I'm thinking it will be too high once if I install the vinly. They didn't really touch base on this issue in the video. You said you had some uneven spots in yours for this you can use self leveler in those spots before you install.

@tannytate1 3 жыл бұрын

This guy explains how to transition from higher to lower or lower to higher pretty well. kzfaq.info/get/bejne/ldWEiKVqqrOXkWw.html

@tannytate1 3 жыл бұрын

The last segment in the video he explains how to transition from something that really high.

@rbs1521 3 жыл бұрын

The off the shelf transition pieces usually cover a 1/4 drop pretty easily. I would check the manufacturers recommendations on the transition rail and if it won’t cover you may have to add a thin piece of trim to fill the gap at the bottom of the rail that’s not covered, thanks for watching and we’ll try and include some more details on this in the next video. Thanks!

@tool-nh8mk 7 ай бұрын

Fantastic video, now when are you coming to my home? 😊

@DIYDudes 7 ай бұрын

Lol it’s diy, try it! Good luck!

@armandomartinez6718 2 жыл бұрын

Since you put the laminate over the tile did you need longer bolts for the toilet?

@DIYDudes 2 жыл бұрын

We didn’t need to because there was enough length on the existing bolts but yes. You may have to get new bolts and an over sized walk ring for the toilet

@jimmyb4956 8 ай бұрын

Just wondering why you cut the baseboards down? We just left ours and it went the thickness of the floor higher and covered the old caulking line just fine

@DIYDudes 8 ай бұрын

The only reason we did is the floor we raised tied into a floor we didn’t and the base board spanned between the two… I didn’t want to adjust the rest of the base boards in the house. Thanks for watching!

@trish10-in44 2 жыл бұрын

Question, should you remove existing tiles if they appear raised in places? I am all for laying vinyl plank over my existing tiles, but I don't want a lump from the old tile below.

@DIYDudes 2 жыл бұрын

Hey Trish you definitely need to make sure that the surface is flat/level You can’t lay on top of an uneven surface

@Z71Silverad0 5 ай бұрын

I have a master bathroom (Tiled) in the master bedroom (Carpet). I would like to be able to lay a new floor (laminate planks) over the bathroom Tile. Because I am removing the carpet in the bedroom and laying the Laminate flooring, I am uncertain if there is a possible way to transition from the bedroom( carpet being removed) and the bathroom/closet ( laminate on top of existing tile in bathroom.

@DIYDudes 5 ай бұрын

You would have to measure the change in height between the top of the tile and the floor under the carpet. Add your thickness of floor to each of those and then Make sure that a transition strip will cover the gap…. Otherwise you’ll have to take out the tile. Or add to the bedroom.good luck!

@dl1747 2 жыл бұрын

How can I make the cover waterproof? I have thick tiles with deep grout lines in my kitchen and in many areas, the flooring is uneven in height and thickness

@DIYDudes 2 жыл бұрын

Not sure what you mean sorry

@hollisey19 3 ай бұрын

what flooring did you use? name ? company?

@prophetseven728 Жыл бұрын

Would not the Grout lines of the old tile floor cause damage to new Vinyl floor?

@DIYDudes Жыл бұрын

No, I would just make sure that you use a rigid core flooring of about 1/2 inch thickness and you’ll be fine without filling in the grout lines. We installed this for a year or two ago and it is holding up just fine. Thanks for watching.

@jackieho2848 2 жыл бұрын

What if the tiles are broken underneath ? How to deal with that ? Any tips ? Thanks

@DIYDudes 2 жыл бұрын

Localized removal and add a cement leveling product

@markmiller3210 Жыл бұрын

Can someone help answer this: We are installing almost identical plank flooring (8mm thick) in our mud room over existing hard tile. The tile currently buts up evenly with existing hardwood floors at the transition zone into the kitchen. What do I do at the transition zone as the newly installed plank flooring will now be 8mm higher than the existing hardwood floors. Any recommendations? Thanks

@DIYDudes Жыл бұрын

Yes you can get a transition to step down the height at the edge…. Just make sure the flooring you are using has available matching transitions.

@maryocecilyo3372 2 жыл бұрын

Obrigado!

@DIYDudes 2 жыл бұрын

De nada!

@damionwaller3176 2 жыл бұрын

freakin' Awesome dudes!!!!

@DIYDudes 2 жыл бұрын

Thanks!

@armandomartinez6718 3 жыл бұрын

What if some of my tiles are not completely level?

@rbs1521 3 жыл бұрын

Hey Armando I would take a straight edge or level and find the problem areas... then remove the bad spots only with a chisel and use some floor levelling cement or the set mortar to leave out the spot you had to remove a tile... good luck!

@riggz46 Жыл бұрын

How would I install an underlayment on top of that ceramic tile?

@franciscoguzman881 2 жыл бұрын

I plan on doing vinyl over tile but I currently have carpet in the rooms but I also want to do vinyl in the rooms how do I make up for the added height of the tiles to transition into the rooms?

@DIYDudes 2 жыл бұрын

You would have to buy a transition strip to address the height change. You can find them at your local building supply store

@stangomango8393 2 жыл бұрын

Any concern of losing height of the room/ceiling by adding floor over existing tile?

@DIYDudes 2 жыл бұрын

No. It was 1/2” so not a big deal

@tgreenejams Жыл бұрын

When doing this, can the gap caused by the grout impact the integrity of the new vinyl tiles on top of it? Should a floor leveler be used to bring grout lines up to being flush with the ceramic tile or is this not necessary? Thanks!

@kevinbowers8463 Жыл бұрын

Also wondering this... thanks!

@DIYDudes Жыл бұрын

Hey guys if you have a rigid core flooring then I wouldn’t worry about it. If you are using the thin 2-4mm flooring than i would consider it if your grout gaps are big.

@sbrave 3 жыл бұрын

Didn't know you could install over ceramic tiles. Why do so many break out the old tiles? Floor height, or?

@DIYDudes 3 жыл бұрын

This type of floor can be installed on any sound surface…. Change in height would be a big reason to remove though. Thanks for watching

@edgarestevez2074 3 ай бұрын

I'm thinking to do that, but .y question is I don't need to glue the vinyl tile to the existing ceramic tiles? Any answer is appreciated. Thanks

@DIYDudes 3 ай бұрын

No, this type of flooring should never be glued, it’s meant to “float” meaning it can expand and contract with temperature changes. Check the manufacturer’s recommendations

@kaylahford323 2 жыл бұрын

Hi! Thanks for the video. Did you re use the same trim or get a new one?

@DIYDudes 2 жыл бұрын

We ended up reusing all of the trim… be careful when you remove it

@jonathanchan564 2 жыл бұрын

@@DIYDudes On that same note, did you also cut the trim down for the new height? I saw earlier in the video you did mark it but wasn't sure if you just reinstalled. Thanks!

@DIYDudes 2 жыл бұрын

I did have to cut abit off of a few sections where the floor intersected trim from the existing floor… I just used a table saw

@junjiema4613 2 жыл бұрын

Do I need to do an underlayment? Would the seams from old tiles cause any issues?

@DIYDudes 2 жыл бұрын

They didn’t in our case, a normal depth grout joint is fine as long as you are using a rigid flooring… check your flooring manufacturer recommendations on the under layment