How To Install Window Air Conditioner Support Bracket -Jonny DIY

Рет қаралды 396,429

7 жыл бұрын

Step by Step How to Install a Window A/C Support Mount Bracket. This is Important to Support the Heavy load of Weight that the Unit puts on your Window & Framing.
TOOLS & SUPPLIES
Air Conditioner Support Bracket 80lbs- amzn.to/2rir0A1
Air Conditioner Support Bracket 160lbs- amzn.to/2rQ6Fmr
NO DRILL A/C Support Bracket- amzn.to/2Fz1hIS
8,000 BTU Window A/C Unit - amzn.to/39u5xde
Cordless Drill Set- amzn.to/3dH5dcZ
Drill Bit Set- amzn.to/2fSpMYz
Household Tool Set- amzn.to/2xoyu5c
Measuring Tape- amzn.to/2supid8
Torpedo Level- amzn.to/2qVsDA0
Safety Glasses- amzn.to/2ez41Jw
How To Install Window A/C Unit Video
• How To Install Window ...
How To Fully Clean Air Conditioner & Improve Cooling!
• How To Clean Window AI...
If you Enjoy the Channel Consider Helping Support it by Donating below & by Subscribing.
PAYPAL DONATION www.paypal.me/JonnyDIY
Thank You for watching, Please Subscribe & Click BELL Icon To Enable Notifications for NEW Upcoming Videos, Give a Thumbs up, Comment & Share, I'd appreciate it tremendously! :) Remember to Keep on, Doin it Yourself!

Пікірлер: 355

@JonnyDIY 6 жыл бұрын

*Tools & Supplies Used* Air Conditioner Support Bracket 80lbs- amzn.to/2rir0A1 Air Conditioner Support Bracket 160lbs- amzn.to/2rQ6Fmr NO DRILL A/C Support Bracket- amzn.to/2Fz1hIS 8,000 BTU Window A/C Unit - amzn.to/39u5xde Cordless Drill Set- amzn.to/3dH5dcZ Drill Bit Set- amzn.to/2fSpMYz Household Tool Set- amzn.to/2xoyu5c Measuring Tape- amzn.to/2supid8 Torpedo Level- amzn.to/2qVsDA0 Safety Glasses- amzn.to/2ez41Jw If you Enjoy the Channel Consider Helping Support it Patreon- www.patreon.com/JonnyDIY Paypal Donation- www.paypal.me/JonnyDIY *Thanks for Watching! Consider Subscribing & Clicking the BELL Icon for all NEW Videos!*

@rjmarvin7533 6 жыл бұрын

You know it’s simple when the video begins during the day, transitions into night and ends in the day again.

@JonnyDIY 6 жыл бұрын

haha its not too bad. Started the project at dusk on a hot night then stopped for dinner & finished up the next morning

@tehahn1 4 жыл бұрын

yeah.l caught that really quick YAHOO!

@bane_mane_473 3 жыл бұрын

I started mine tonight but have to drill into brick and need to get a mason army but/screws, so I’ll be finishing tomorrow (hopefully)

@Eric-tc5zq 3 жыл бұрын

What about the other 8 pieces that came in that box. This guys seem awesome to have a beer with..... I’ll pass on the DIY😉

@daffymommy 5 жыл бұрын

2 years later and this video is STILL helping people. I'm about to install one of these for my window AC and the instructions made no sense. Thank you for making it clear and easy to do!

@JonnyDIY 5 жыл бұрын

No problem Emily. Thank you for the kind words.

@gregratcliff9831 4 жыл бұрын

That Girl is a Can Do Kid! Lol. Just picking and good luck. I'm heading to fix my Daughter's A.C. now. God Bless All!

@sandrad7447 7 жыл бұрын

So I installed my first AC today, and the bracket to support it, thanks to your video. The written instructions seemed incomplete and somewhat confusing, but seeing you do an install made everything so clear. I am not super handy, but managed to install the bracket and the AC unit in a very non-standard window. I truly appreciate your having taken the time to make and post this video. It is supposed to be 90 tomorrow (very rare here), and I will be cool and comfy thanks to my new AC and you. (The bracket I installed was an A/C-SAFE brand, Model AC-080, but it appears to be pretty much identical to the unit you installed).

@chainamarie03 6 жыл бұрын

Hey Jonny, I finally got both brackets in. I had it set up correctly all along. A friend came by and he was confused as hell by the instructions....but after the the problems i had with it. ...all he did was hammer the outter part down till the part with the rubber end fit over the concrete sill. Thanks again for all you help man!! You gained a subscriber!

@JonnyDIY 6 жыл бұрын

Awesome! So glad you guys got it figured out! Enjoy the Cool AC. Been bloody hot here too!

@justjohnmusicchannel8327 5 жыл бұрын

Great video! And thank you for mentioning the offset to the side depending on the weight and balance of the AC Unit. I would not have thought to do this ! Excellent!

@JonnyDIY 5 жыл бұрын

You're welcome John! 😀👍🏻

@patrickmcmahon9156 3 жыл бұрын

I wish u had a ledge outside my fourth floor apt ..lol. It's so easy when you could work from the outside in 😆. You def did make those confusing instructions easier to understand tho

@JonnyDIY 3 жыл бұрын

Glad I could help. 4th floor thatll be a bit more challenging. Better tie your tools and pieces so they dont fall all way down while working 😁👍

@AveryCorvus 3 жыл бұрын

They say that if you can't explain your craft to a 2 year old, you don't actually understand it. In this scenario, I'm the 2 year old, and this guy explained it perfectly in one shot, which was not what I was expecting when I started searching KZfaq, so I'm forced to conclude he really knows his stuff.

@JonnyDIY 3 жыл бұрын

Thank you for the kind words 👍

@Lionheart_He-Man 3 жыл бұрын

I can honestly say this video has helped us out tremendously for the second floor of my family’s house. I just now I have to get my plexiglass re-cut specifically for the dimensions of our new window above the AC

@JonnyDIY 3 жыл бұрын

Glad I was able to help you guys all out 👍

@gma904 6 жыл бұрын

Getting one of these TO DAY. It is 🔥 in my apartment. Thank you!

@JonnyDIY 6 жыл бұрын

Youre welcome, hope you get it sorted. Heat waves goin round are crazy hott!

@sensorystreetpediatricot5944 6 жыл бұрын

Thank you. That was very helpful. I just finished installing it with ease.

@JonnyDIY 6 жыл бұрын

youre welcome! Glad you got it done. Stay cool! :)

@nycblueyes10024 5 жыл бұрын

Thank you for this. I bought one yesterday, and your video is extremely helpful!

@JonnyDIY 5 жыл бұрын

You're welcome 😀👍🏻

@alexmedina7266 6 жыл бұрын

Thank you for This. Me and my mom placed ours. We mexican it out - I moved into a Slide Window duplex for the time being and was left with these slide windows..it sucked but we did it. She also enjoyed your Intro and ending. Lol 👍 Thanks

@JonnyDIY 6 жыл бұрын

Youre very welcome. Glad you two got it figured out and done. Haha thanks, I try and have a lil fun making these videos

@nidzavalentin8698 7 жыл бұрын

Thank you so much. I brought a similar bracket and the instructions were VERY confusing. I had to make some modifications but it's on there very securely.

@JonnyDIY 7 жыл бұрын

Yes you're totally right! The instructions were wayyyyy too complicated and confusing for this type product. I read over them at least a few times and figured a Video would help better explain the instructions. Glad you got it done! thanks for watching!

@chainamarie03 6 жыл бұрын

Jonny DIY lol, most of the instructions are in other languages.

@markfanli 6 жыл бұрын

Agreed! Bought the same product and gave up reading.

@dennyv6954 4 жыл бұрын

Jonny, you nailed it bud!!!! Thank you for clearing up the questions I had!!!!!! from DV in Dallas!

@JonnyDIY 4 жыл бұрын

You're welcome, glad it helped you out👍🏻 Hello from California! 🤙

@oscarxms 5 жыл бұрын

Thank you for a very helpful video. I appreciate it.

@JonnyDIY 5 жыл бұрын

You're welcome! 😀👍🏻

@chloes2741 3 жыл бұрын

WAY better than the instructions. I got moody from the heat and threw it in the towel. Lol

@JonnyDIY 3 жыл бұрын

Lol glad I could help! 👍

@jessewilson1441 Ай бұрын

Me too...me too

@blueskin7377 4 жыл бұрын

Simple , but good Job , Thank You So Much , I truly Appreciate this Tutorial

@JonnyDIY 4 жыл бұрын

You're welcome 👍🏻

@kathey1981 5 жыл бұрын

Thank you for the video! I couldn't find another video that shows this product being installed. I'm not one for instructions. Thanks again!

@JonnyDIY 5 жыл бұрын

You're welcome 👍🏻

@fenniecheng1961 2 жыл бұрын

*Really works well and Easy to instal **Fastly.Cool*

@JonnyDIY 2 жыл бұрын

Happy to help 👍

@zzipdog 5 жыл бұрын

Thanks, Jonny! Very helpful!

@JonnyDIY 5 жыл бұрын

You're welcome Donald! 😀👍🏻

@shannon3265 7 жыл бұрын

Great idea. Thanks for making this video.

@JonnyDIY 7 жыл бұрын

You're welcome, glad it helped you. Thanks for watching

@angeliquebass 11 ай бұрын

So thankful for your video. We just bought a bracket yesterday. We have the instructions lol but I didn’t want to do it wrong. Thank you so much for your helpful video I’m so glad I found it.

@JonnyDIY 11 ай бұрын

You're very welcome, happy I could help you out 👍

@medsan11 7 жыл бұрын

Bro, thanks for the video... truly helpful.

@JonnyDIY 7 жыл бұрын

No problem! Glad it helped. Stay cool :)

@tonycontreras2913 Жыл бұрын

Very good mate I just bought this kinda bracket and looked at the instructions and was going to return it Thankfully I came upon your video It was quick but to the point 👍🏽

@JonnyDIY Жыл бұрын

You're welcome, glad I could help you out 👍

@sean808080 7 жыл бұрын

Excellent video. So useful!

@JonnyDIY 7 жыл бұрын

Glad it helped! Thanks Sean!

@rudygarcia1764 4 жыл бұрын

Great video , very easy to follow , thank you !

@JonnyDIY 4 жыл бұрын

You're welcome, glad it was helpful! 😀👍🏻

@babersolanki7989 11 ай бұрын

Units was easy to unpack and slide out from the case. I installed this in the wall to cool my garage. I live in NV and it’s been cooling my garage pretty easily while being 105 degrees outside.

@JonnyDIY 11 ай бұрын

Nice! Yeah it's been a hot Summer 👍

@michelemcfarland5400 4 жыл бұрын

Thanks again and Very helpful....keep up the DIY's !!

@JonnyDIY 4 жыл бұрын

You got it 🤙

@chrisortiz8072 3 жыл бұрын

I just used a piece of left over decking from when I rebuilt my porch and seems to be working fine. I didnt have to make holes and that's was my goal

@JonnyDIY 3 жыл бұрын

Nice, yes just build a lil stand for it. Thats what Ive seen people make before they even had these things. These are good if you're on 2nd or higher floors

@dudeitsgunther 5 жыл бұрын

the instructions that come with this product are terrible. i watched this video and had it installed in 20 minutes. thanks dude!!

@JonnyDIY 5 жыл бұрын

You're welcome! 😀👍🏻

@tonycontreras2913 Жыл бұрын

Haha I agree was pretty difficult to read those stupid instructions this video was straight to the point

@mpetuous1 27 күн бұрын

Instructions a mess, this video great! Thank you!!

@LynchMob09R 7 жыл бұрын

You Da Real MVP for this video!!!

@JonnyDIY 7 жыл бұрын

Thanks for watching! Glad it helped you

@lorenzocaracixtos547 2 ай бұрын

Good job man. Thank you for explaining to us.

@JonnyDIY 2 ай бұрын

You're welcome, glad I could help 🙌👍

@julialindsey5165 6 жыл бұрын

Thanks for the simple and clear video! I have a question, is it possible to use this type of ac support when my walls are brick?

@JonnyDIY 6 жыл бұрын

Yes you can. If the window sills are brick or cement youll have a harder time drilling the holes but still possible. To be honest though if you have cement or brick sills you could probably get away without a support as long as the AC isnt super heavy. Thanks for watching

@armandsrevelins1624 3 жыл бұрын

Just what I needed thanks. Video is so much better than the manual and diagrams

@JonnyDIY 3 жыл бұрын

You're welcome. Glad I could help 👍

@davevrox3023 Жыл бұрын

❤ Thanks Brother. I realized I needed a board. I just put the A/C in anyway. Fix it later. Same exact item. 😊

@JonnyDIY Жыл бұрын

You're very welcome. Happy I could help you out 👍

@davevrox3023 Жыл бұрын

You made it super easy to understand. Kudos!!!! 😁👌👍

@victorlin8098 3 жыл бұрын

Thank you very much for your sharing!!!!!

@JonnyDIY 3 жыл бұрын

You're welcome, glad I could help 👍

@user-em6ie2be7x 3 жыл бұрын

Thanks for info it'll be quick & easy.

@JonnyDIY 3 жыл бұрын

You're welcome 👍🏻 glad I could help

@gretch582 4 жыл бұрын

Great video. Informative and to the point. I do have one question. What happens when you take the A/C out of the window. Are you left with holes on the outside of your window or does that first block that mount outside the window stay there permanently.?

@JonnyDIY 4 жыл бұрын

Thank you. Yes you can just leave it there after you remove the AC at end of Summer 👍🏻

@Brooknamsfinest 6 жыл бұрын

i just did it ! your video helped a lot, thanks man !

@JonnyDIY 6 жыл бұрын

Awesome, youre welcome. Glad you got it done! :)

@waltleon3480 5 жыл бұрын

Thanks brother for the tips

@JonnyDIY 5 жыл бұрын

You're welcome Walt 👍🏻

@LS-gh1vk 3 жыл бұрын

Thank you for the help!

@JonnyDIY 3 жыл бұрын

You're welcome, glad to help 👍

@milesmorse2349 7 жыл бұрын

thanks man big help !

@JonnyDIY 7 жыл бұрын

Glad it helped Miles! Thanks for watching

@kikik1129 4 жыл бұрын

This truly saved my life you're doing the lord's work haha

@JonnyDIY 4 жыл бұрын

Haha glad it helped you out. I know the heat can be brutal! 🥵 my area's in a heat wave right now

@Crystal-ee1lv 3 жыл бұрын

Thank you! I just bought one and was kinda confused on the instructions. Some superheroes don’t wear capes. 😉

@JonnyDIY 3 жыл бұрын

You're very welcome, glad I was able to help you out some. And thank you for your kind words 👍

@paulgray3444 3 жыл бұрын

THANKS for doing this! :) Good job! :)

@JonnyDIY 3 жыл бұрын

You're welcome, glad I could help 👍

@michaelbrogan12 7 жыл бұрын

Thanks man!!

@JonnyDIY 7 жыл бұрын

No problem, glad it helped. Thanks for watching & commenting :)

@paulmannino529 Жыл бұрын

Thanks for the help.

@JonnyDIY Жыл бұрын

You're welcome, happy I could help you out 👍

@ElJoshPaul 3 жыл бұрын

Thank you for the video

@JonnyDIY 3 жыл бұрын

You're welcome, glad I could help 👍

@chrissNyC 5 жыл бұрын

I Live in the 24 Floor will I be able to do All the things you just did or does this work for ground floor ac installation?

@JonnyDIY 5 жыл бұрын

You can do from inside, just maybe tie the bracket to something so you dont accidentally drop it out window

@katastrophe7764 4 жыл бұрын

What can I use with on an older home with that brick ledge right at the bottom of the Windows outside?

@JonnyDIY 4 жыл бұрын

honestly you dont always even need a bracket if you have a large enough and strong window sill. You want to make sure its slanted outward for drainage though. If you had to have a bracket you could still install this but with concrete screws

@Cathairez 3 жыл бұрын

I want to try one of these, but i'm wondering if it'll work with vinyl siding since the siding has a bit of a give to it.

@JonnyDIY 3 жыл бұрын

Could always put a thin board under the arm to distribute the pressure

@DROxERA 7 жыл бұрын

i have this same bracket but i dont have a drill is installing this with a screw driver possible ?

@JonnyDIY 7 жыл бұрын

Id try and borrow one if possible. If not you could use a hammer & nails or use nails to pilot the holes (dull nail tip to avoid wood splitting) & hand screw in

@jayvail6705 6 жыл бұрын

Thanks so much, so much better than the directions that came with it

@JonnyDIY 6 жыл бұрын

youre welcome, glad it helped you out :)

@losttribel 6 жыл бұрын

Thank you

@JonnyDIY 6 жыл бұрын

Youre Welcome. Glad it helped! :)

@lisahyatt808 6 жыл бұрын

Thanks, helped but we still have a problem because the outside window sill sticks out really far from the wall and the bracket can’t reach the outside wall. Any ideas?

@JonnyDIY 6 жыл бұрын

Hmm well if the bracket part that the AC sits atop is long enough and just the arm part isnt long enough you may have to buy a piece of wood that you could cut to fit. Maybe a piece you could cut to fit in between the original part and the AC bracket. Sort of like an extension piece. Then just screw the two together

@jeanclaudevandam4974 5 жыл бұрын

I want to install one of these but I don't have a sill on my window to drill the bracket into. The window is flush with the vinyl siding. Any suggestions? Thanks for the video.

@JonnyDIY 5 жыл бұрын

Hmm maybe screw a block of wood to the wall. You may need to build s custom support

@lunatone3333 6 жыл бұрын

Hi sorry to bother you... Does the leg of the bracket get tighter against the wall when the AC sits on it?

@JonnyDIY 6 жыл бұрын

No bother. Yes it should tighten up as the weight of the AC pushes it tight against wall.

@mr.skeptical3071 4 жыл бұрын

Easy! Thanks

@JonnyDIY 4 жыл бұрын

You're welcome 😁👍🏻

@jadey5476 4 жыл бұрын

How would I do this if I have a sliding window do I need to modify the directions any sort of tips or help would be greatly appreciated really good video btw! :)

@JonnyDIY 4 жыл бұрын

Thanks. No modifications I can think of other than needing a piece of plywood or ridgid foam to seal up window above AC unit 👍🏻

@hopelemley4703 7 жыл бұрын

Is there a way to install if you don't have a sill wide enough ?

@JonnyDIY 7 жыл бұрын

If youre talking about the opening of the window. It needs to be wide enough for the A/C Unit but if the sill depth is smaller that's ok. This bracket only uses 3 screws that mount sideways so your sill could be small only a couple inches and this bracket will still work. You could always screw a piece of wood down to the sill to make it bigger as well...

@llewis8254 7 жыл бұрын

So I got the Frost King bracket that does not require tools and the directions are even more confusing! Have ya got a video for those?

@JonnyDIY 7 жыл бұрын

Hey L Lewis. Sorry I dont currently have a video on that one, but I just checked out a picture of it. Looks like its designed that you put the wide part of the bracket inside your house and extend that part slightly wider than your window opening. So it uses gravity/weight of the A/C unit to hold it in place. That seems to be the only difference than the one I installed in this video. Follow all my other instructions about the levelness etc. Then just install ac unit as usual. Good Luck!

@Anony1990 2 ай бұрын

Bro my window and sill are at the same level . Do i still need to add the blocks mentioned in at 1:34 . Can i mount the bracket directly on my window sill?

@JonnyDIY 2 ай бұрын

You can mount directly to sill if even heights 👍

@carolinamejia674 5 жыл бұрын

Quick question what do you do if you lost the plastic pieces to the bracket??

@JonnyDIY 5 жыл бұрын

U could use a small block of wood to level it

@musicluver1979 4 жыл бұрын

awesome - you're top 3 out of 4 videos shot @ Burnside LOL good vibes

@JonnyDIY 4 жыл бұрын

Good times, except for ur shin scrape 😳😧😬

@musicluver1979 4 жыл бұрын

@@JonnyDIY hahahaha

@diaperrash8952 6 жыл бұрын

Thanks bro

@JonnyDIY 6 жыл бұрын

youre welcome!

@chrispanuzzo4245 Жыл бұрын

Any suggestion on how to do it on a 2nd floor window?

@JonnyDIY Жыл бұрын

Could install from inside and or use an extension ladder. Either way be careful especially when setting the ac unit up on sill

@laurawoodman1063 2 жыл бұрын

Why is it not flush up on the a/c unit where does the weight lean on?? At the end there's still a gap? Is that right I don't want the weight of the ac on my windows...please clarify I'm putting 2 in on my 2nd story home tomorrow- thanks

@JonnyDIY 2 жыл бұрын

The point of the brackets is to transfer and displace the weight of the ac units from the sill to the outer wall 👍

@gabriellerobbins33 5 жыл бұрын

If your sill is vinyl, will this still work and be sturdy?

@JonnyDIY 5 жыл бұрын

Yes as long as you screw through the vinyl into wood or concrete underneath it

@xxvertcerizexx Жыл бұрын

Is it 3 inches for all ac units? What if mine seems smaller than yours? Is it still 3 inches from the middle? Mine seems to tilt more easily towards the right ride when i put it that far left. But an inch less and it seems pretty balanced. But maybe it shouldn’t be perfectly balanced on both sides? Maybe this is to compensate for the heavier side? I don’t know. Can anyone help?

@JonnyDIY Жыл бұрын

The balancing point will be different for every unit, so wherever it feels balanced you can place arm 👍

@rem45acp 3 жыл бұрын

I rent in an apartment building, and CANNOT drill on the window sill outside of my apartment. Could this be mounted by just putting the blocks on the inside of the window, and drilling there instead, on the window "stool" part?

@JonnyDIY 3 жыл бұрын

You could I believe, but you will need to put something to close the gap underneath the AC unit 👍

@cesarbarrios5717 4 жыл бұрын

Can you screw support on inside of window sill

@JonnyDIY 4 жыл бұрын

Yes I suppose if thats the only option. You will just need to put some foam to fill the gap on each side of bracket when window closed 👍🏻

@speedlearner 5 жыл бұрын

What material are the blocks made out of?

@JonnyDIY 5 жыл бұрын

some sort of hard plastic

@josephweydemann329 6 жыл бұрын

It looks great but. The mobile home I am renting has vinyl siding. I had to place blocks of wood to firm the bracket against the siding. Also mobile home windows and not the same as a 2x4 constructed home. There is no well built frame. There is no sash from the bottom window to come down and help secure the AC unit in place.

@JonnyDIY 6 жыл бұрын

Nice fix with the wood on the siding. Yeah you may need to use some plywood to block the sides and give it sturdier mounting

@brianfox2526 3 жыл бұрын

You suggest a 12 V drill to complete this install? Or does it need 20V? Thanks!

@JonnyDIY 3 жыл бұрын

Either will work just fine 👍 I use 18v or 20v but the new 12v is so powerful and light

@artnos 7 жыл бұрын

how do you do this if your on the second floor?

@JonnyDIY 7 жыл бұрын

From the inside. You only need to screw 3 screws into the Sill. Im sure youll have to make a couple trips downstairs when you inevitably drop things out the window though lol

@TheJayaldae Жыл бұрын

Under my window frame is red brick. Do I need anchors for the screws?

@JonnyDIY Жыл бұрын

If screwing into brick you can get anchors or some tapcon screws

@josephweydemann329 6 жыл бұрын

Thanks that was great I live in Mobile home and the windows are not the same size as house windows.

@JonnyDIY 6 жыл бұрын

Youre welcome Joseph! Glad the video was of some help to you

@95turbogirl1980 Жыл бұрын

Same!

@Beenthere2xs 5 жыл бұрын

Thanks so much for this. I have the bracket you linked to on Amazon. The box says, "mostly indoor installation" and the image of an installed unit on their company website suggests that the concave block is somehow indoors, which it is not at all. Very confusing. Why doesn't the company make a video to clarify. They suck. You rock. Thanks again.

@JonnyDIY 5 жыл бұрын

You're welcome. Yes video instructions should be the norm by now 👍🏻

@dudeitsgunther 5 жыл бұрын

they really should just pay Jonny for the rights to this video hahah

@UEAdmiral 5 жыл бұрын

Thank you! Unbeknownst to me, my Grandmother bought one of these and lost half the parts. What was left was *really* confusing, and now I know nothing made sense because of the missing components!

@JonnyDIY 5 жыл бұрын

You're welcome, glad it helped you out 👍🏻

@BuddyBearCreator 4 жыл бұрын

3 of your top videos are @ Burnside

@jessereyes3302 4 жыл бұрын

Would this work on side sliding window??

@JonnyDIY 4 жыл бұрын

Woops sorry confused other video. Yes works with sliding window

@yvhirkush8485 Ай бұрын

Thanks man

@JonnyDIY Ай бұрын

You're welcome! Glad I could help 🙌👍

@stevejiminez7791 6 жыл бұрын

I don't have an exterior window sill can I install the plastic blocks on the inside window sill

@JonnyDIY 6 жыл бұрын

I believe so, only thing I can think of that will be different is you will have a larger gap to fill/cover around the bottom of window

@stevejiminez7791 6 жыл бұрын

Got it thanks

@zootedone1234 3 жыл бұрын

can you mount this on the inner window sill..inside the home..cant screw into my outer window sill due to it being hollow, newer windows...i dont want to drill holes and it dont work..now i would have water coming in down the walls..i could tape it,but dont want to take the chance.

@JonnyDIY 3 жыл бұрын

Don't think it's long enough to reach inside, plus then youd have a big gap in window. You may want to look at the "no drill" brackets or build somethkng custom from wood

@zootedone1234 3 жыл бұрын

@@JonnyDIY thank you.

@djsegwayname8156 3 жыл бұрын

Thx Mon! Clean up that room and do your laundry. Lol.

@JonnyDIY 3 жыл бұрын

You're welcome, haha I'll tell my Uncle, it was his messy room and laundry that needed folding hahah 🤦‍♂️

@MM-wb3jr 6 жыл бұрын

HEEEELPP your vid skipped the exact part I'm having trouble with. How do you tighten the screws or whatever so that the diagonal support legs are sturdy against the house? They just kind of dangle there and offer no support...

@JonnyDIY 6 жыл бұрын

you just unbolt the diagonal arm and adjust it inward or outward (moving it to a new set of holes) til its at a position where when the weight of the ac is atop of it it, presses the arm against the wall and gives support

@raheem12345 3 жыл бұрын

Bro same I need help with this exact part they don’t show how they tighten the screws for the part that rest on the wall and not all of us have power drills and a whole tool kit to do it that part is confusing

@fuzzybusiness3437 6 жыл бұрын

I live in the hood, how do you keep the window locked into place so no one breaks in with ease?

@JonnyDIY 6 жыл бұрын

Cut a piece of wood (broomstick, pipe, etc.) That fits above the window in the side channel. Make it that exact size so no one could lift window up. Or drive a couple screws partially in to the side right above window, but thats dangerous in case of emergency.

@rancid216 3 жыл бұрын

I installed my new window AC and bracket today. My support was a different brand, but looks just like what you used. Have to say watching your video was a big help over trying to figure out what the hell they were talking about in the instructions. Instructions should be just watch your video. LOL Only problem I had was I had the bracket installed and I put the unit on it and it was tilting back toward me. WTF. Damn unit wasn't flat on the bottom. There was a bulge on the outer end. So I had to lower the bracket down about an inch to compensate for that bulge. Problem solved and my bedroom is now a cool 66F and it's around 95F outside.

@JonnyDIY 3 жыл бұрын

Awesome, glad my video helped you out and you got it installed. Nice to beat the heat with the cool AC 🥶👍

@darrenfuentes5423 6 жыл бұрын

what if the sill is concrete?

@JonnyDIY 6 жыл бұрын

You could still install this type of bracket, but you will just need a concrete drill bit and a few concrete screws. But with a strong concrete sill you may not even need a bracket, unless it's a very large unit

@bahhaziz 7 жыл бұрын

did it take you 2 days to install that AC?

@JonnyDIY 7 жыл бұрын

Lol well I started on it late one nite then had to go to dinner, & finished it the next afternoon :)

@VernonMorris1 2 жыл бұрын

thx ! the freaking manual is in like 9 pt font or something . This video made it super easy to understand how to install it.

@JonnyDIY 2 жыл бұрын

You're welcome, glad I could help you out 👍

@speedlearner 5 жыл бұрын

Won't the water from the air conditioner eventually erode the house wall?

@JonnyDIY 5 жыл бұрын

the AC is sloped away from house and drainage on bottom of AC Unit will drain water condensation out without it getting on wall

@laurie-dk9zf 6 жыл бұрын

I have gotten as far as pre-drilling the hole for the concave bracket (2" deep per the instructions and the length of my drill bit) but the screws are 3" long! My cordless screwdriver/drill is chugging to get it down the 2". Do I need to get 2" screws? Wut?

@JonnyDIY 6 жыл бұрын

Hmm sounds like you need to charge drill up some. Try and drill as far down closest to 3inch you can. Maybe use bigger diameter drill bit. You want it the size of the smaller smooth part of the screw shaft. Ohh and rub the screw on a bar of soap or wax and itll drive in a lot easier

@laurie-dk9zf 6 жыл бұрын

Ha! This is day 4 of trying to do this because the battery and then the charger died, then I had to go to ebay because the charger is discontinued (that will tell you how old my Makita is--about 25 years)! I did end up getting a longer drill bit and using soap. I don't know what the magic was, but I thank you for your response and for putting up this video in the first place! Keep up the good work!

@JonnyDIY 6 жыл бұрын

Youre welcome. Haha I had a similar problem with some power tools last year. Had to get new batteries from the manufacturer, because they wouldn't hold a charge anymore. Glad you got it done!

@darrell1469 3 жыл бұрын

So my window sill juts out so much that I can't have the support hit the siding and still be remotely stable. Would you recommend a different product that I might be able to use?

@JonnyDIY 3 жыл бұрын

You could try putting a block of wood onto the arm to shim the wall out further. There are some "no drill" ac mounts. I think I put one in description. If the ac unit isn't super heavy and the sill is strong you can install without a bracket as well. Just be sure to slightly tilt outward for condensation run off

@darrell1469 3 жыл бұрын

Thank so much!@@JonnyDIY

@JonnyDIY 3 жыл бұрын

@@darrell1469 you're welcome 👍

@FunnyCatVidzz 4 жыл бұрын

What if you don’t have the support bracket?

@JonnyDIY 4 жыл бұрын

As long as your sill is pretty sturdy youll still be ok without it

@dianamunoz468 3 жыл бұрын

Not sure why I’m so confused I have a metal window frame and it sits on top of a brick window frame. Am I screwing this into the metal or the brick?

@JonnyDIY 3 жыл бұрын

You would most likely be screwing this in through the metal frame into the brick. So before screwing you will need to drill through the frame first with a metal cutting drill bit and then use a masonry bit to drill the brick.