How to install your AEG Rectangular Hood exhaust mode

How to install your AEG Rectangular Hood exhaust mode - Wall installation

Рет қаралды 119,122

Күн бұрын

In this demonstration, our experts show you how you can easily install your AEG Rectangular Hood yourself. It is quick and easy and you should be able to enjoy your new AEG appliance straight away.
HMAACH19IVE00001

Пікірлер: 20

@PatrickPlaggenborg 3 жыл бұрын

The upper part of the ventilation shaft looks like it’s installed upside down. The grill is covered by the bottom part but should be exposed instead.

@grayhalf1854 3 жыл бұрын

good spot!

@troffmeister68 2 жыл бұрын

@@grayhalf1854 yep the ventilation grill needs to be at the top , what a cock up he has completely covered it up , plonker

@thaitom449 2 жыл бұрын

Good pro....ventilation chimney top part is upside down 🤣🤣

@TheAllMightyGodofCod 2 жыл бұрын

Didn't you forget the ventilation pipe hose or whatever?

@picass0o0o 4 жыл бұрын

If just the walls were that easy to drill mine is concrete.

@agneloferrao8404 2 жыл бұрын

Did he install the top cover panel upside down? or am I wrong?

@troffmeister68 2 жыл бұрын

the ventilation grill needs to be at the top , what a cock up he has completely covered it up , plonker

@kipu01 2 жыл бұрын

@@troffmeister68 He instaled it correctly, the ventilation grill only have to be exposed if you set it up as a recirculation vent. You have to buy additiona parts like charcole filter additional ducting for a recirculation set up.

@troffmeister68 2 жыл бұрын

@@kipu01 nope i just installed a new neff one in my kitchen yesterday , replaced a faulty 8 yrs old model , new unit cost 299 comes complete , and you have to install it with grill at top , as the chimney is a sliding part depending on height of ceiling , the grill is never hidden , in fact the grill area has screws to attach to a wall bracket at ceiling height so grill is exposed at the top near ceiling

@chriscrumpton8496 2 жыл бұрын

Hood can be set up for internal circulation, this needs the vents at the top in order to allow filtered air back into the room. When using the extractor to vent to the outside through the wall the vents aren’t needed and can therefore be out of sight by placing them at the bottom. Screw holes are at top and bottom of inner so that it can be mounted either way up

@habiblee2603 4 жыл бұрын

Hi, I purchased a model: DPB2621S. Does it work with filters or a ventilation pipe?

@AEG 4 жыл бұрын

Hello Habib Lee, Can you please let us know your country of purchase? that way we can connect you with the best local team to assist. Warm regards, The AEG Team

@habiblee2603 4 жыл бұрын

@@AEG Belgium

@AEG 4 жыл бұрын

Hi Habib, please reach out to our local Belgium team via Messenger at the following link: facebook.com/AEGBelgie.Belgique They'll be happy to assist, and will be most familiar with the machines available in your country! Warm regards, The AEG Team

@agneloferrao8404 2 жыл бұрын

Mission possible 10

@hymavathikodur5238 4 жыл бұрын

Hi dear,for this hood ,we don’t need to put any holes on the wall?can we use like this

@AEG 4 жыл бұрын

Hi Hymavathi, would you mind letting us know your country of purchase? That way we can connect you with a local team who can best answer your question. Warm regards, The AEG Team