HOW TO INSULATE A CABIN FLOOR AND KEEP IT RODENT FREE

No video

HOW TO INSULATE A CABIN FLOOR AND KEEP IT RODENT FREE

Рет қаралды 870,597

OFF GRID HOMESTEADING With The Boss Of The Swamp

Күн бұрын

Sharing my technique how I insulate my cabin floors and keep them rodent free.
Lots of people asking if they could use this in the walls and ceiling. Myself, I would NOT surround myself with it. A building needs to breath. At most, I would use it in the floor and ceiling but fiberglass in the walls. At 3.10 in this video you will how I install it during new construction. • Off Grid Cabin. The Wo...
Link to the FOIL INSULATION that I use in this video: amzn.to/2UcGOTy
Bubble foil and tape: amzn.to/3XwMMMw Tape amzn.to/3iH25U4
LINKS TO ALL THE ITEMS, TOOLS AND EQUIPMENT THAT WE USE CAN BE FOUND IN ONE CONVENIENT LOCATION. CLICK HERE FOR LINKS: www.amazon.com...
As an Amazon associate, I earn from qualifying purchases.
On my channel you will find videos pertaining to homesteading, gardening and living off the grid with fun DIY projects for self-reliance and SHTF emergency preparedness situations, with some campfire cooking and good old backwoods humor thrown in. Sharing knowledge and stories from over 30 years of living in the woods.
FOR MORE CONTENT AND READINGS FROM MY PERSONAL MEMOIRS, COME JOIN OUR FRIENDLY CABIN LIFE COMMUNITY ON PATREON: / bossoftheswamp
FRIENDS OF FRANKIE AND THE BOSS page: frankieandtheb...
MOST FREQUENTLY ASKED QUESTIONS:
Q: How do you have internet at your cabins? A: I have cell service at both cabins but it is spotty due to foliage and cloud cover. I can access the internet from my cabins but have to drive to a local wifi location to upload videos.
Q: How old is Frankie? A: Frankie will be 10 in April of 2018
Q: What video editing software do I use? A: Presently, all I use is Windows Live Movie maker but I’m considering trying imovie, Adobe Elements or SONY VEGAS PRO.
Q: How do you get your water? Did you dig a well? A: Presently, I haul water to the NY cabin but at the NH cabin, I drop a kettle into an old well that was dug by hand by the settlers in the 1700’s.
Q:What is your favorite brand of cast iron cookware? A: I prefer using vintage cast iron. My favorites are BSR and Griswold. If I had to buy new I would buy a Lodge Brand. I plan to purchase this dutch oven in the future:
Q: What do you use for refrigeration? A: We have a small gas refrigerator that we salvaged from an old Shasta camper and a custom icebox that I built into the cabin wall. We make ice on site with a propane freezer.
Video of icebox:
Video of Gas Refrigerator:
Propane Freezer:
Q: What do you use for cooking and heating? A: We use a Kitchen Queen 380 for cooking and heating during the winter months but we also have an antique gas stove in the cabin for when we don't need the heat from the KQ.
All video content is protected by copyright. Any unauthorized reproduction or posting will be subject to a users fee. Copyright JC Desclos 2017 All rights reserved.

Пікірлер: 1 300

@jessehuff3876 6 жыл бұрын

I have been in pest control for years now. I can not tell you how many thousands of dollars I have made from removing soiled insulation. I have done $20k cleanouts. This does make perfect sense. You are the only guy that has made the perfect video on this subject. I will be sharing this many times. Thank you.

@thebossoftheswamp 6 жыл бұрын

Ever since I started using this, everything else seems stupid. I've wasted so much money in the past. Thanks for leaving a nice comment. Cheers :-)

@michaelmorrison197 4 жыл бұрын

Do you have any tips for when ripping strips? I was going to order a 48*125 ft roll, and then will need to rip strips for between joists under cabin just like you did. Looking for any time saver techniques.

@TeenageLiberator 2 жыл бұрын

@@michaelmorrison197 I just did this. I used a tape measure and painters tape. I measured 16 inches and wrapped the tape around that mark. I then used a long blade to cut around the edge of the painters tape. If you measure carefully you should be able to cut your 48in roll into 3 perfect 16in rolls.

@lorenaroma Жыл бұрын

Oh thank You so much! I am building the shed and was just looking for the answer of what to use in Alaska! So it sounds like skirting and that bubble foil! Can I get this at lowes? Home depot? And I love that cross bracing I was going to block straight across but that looks so much better and it looks like a work of art!

@unclejack41 Жыл бұрын

Why can't the mice still chew through the insulation?? It's not steel wool it's soft flexible foil. I'm not believing it.

@srf2112 Жыл бұрын

A lot of people that want to move from an urban environment to a more rural location have no idea what a problem field mice, rats and the like can and will be. Very nice and helpful video.

@mtadams2009 Жыл бұрын

I learned that myself about 25 years ago. I find using bate boxes all around that outside of my home works well. Nothing else did. I love Contact Blox.

@barrywassel3899 Жыл бұрын

Too true - I'm in a mountainish place for five months now from the suburbs, and already had a small red squirrel dig his way through my soffits into the attic. I might try the bubble-foil to block them !

@mixedmediaartgirl300 Жыл бұрын

That is why I love my mouser

@dwarden3 Жыл бұрын

I use this in 36" x 20' roll when I'm hiking for a bed roll/pillow. Light, easy to use & easy to clean. Rolls up in seconds and if I have to I can use as a signal. Also great for reflecting radiant fire pit heat.

@HalsPals Жыл бұрын

I completely wrapped my well house with bubble foil including the roof, sealed the seams with foil tape and made it airtight. The well house is in the 50s even when the outside temperature is well below freezing. Great stuff! It may even shield from an EMP or solar flare.

@xxdragan Жыл бұрын

Is that 50 deg without any heating?

@__td4712 Жыл бұрын

Your whole house?

@maddierosemusic Жыл бұрын

@@__td4712 His WELL house! Like where the well pump is.

@maddierosemusic Жыл бұрын

@@xxdragan I would think the well pump, being 220v, would throw off enough heat. Some guys have a 25 watt light bulb in the well house.

@mikewillower79 Жыл бұрын

How do you glue your sub floor if the foil is on top of floor joist with out glue your going to have a squeaky floor

@NeverTakeNoShortcuts Жыл бұрын

Did this to my old hunting cabin. I made a huge difference. I added two layers, one with a 1 inch air gap under the floor boards, the other layer over the floor joists. Highly recommended

@wbriggs111 Жыл бұрын

I won't have to wear my aluminum foil lined hat inside anymore.

@sarachapman5206 Жыл бұрын

May I ask where you found it and what the brand name is? Trying to locate in my area.

@sarachapman5206 Жыл бұрын

also can this be used in ceilings as well as flooring?

@jenniferhagen4760 10 ай бұрын

@@sarachapman5206 I just found some at Home Depot

@rexmundi8154 Жыл бұрын

I renovated a Spartan travel trailer and mice had stripped every bit of insulation out of the inside and balled it up in the floor. I spray foamed the floor, walls, and roof then went back with this foil insulation as extra insulation in the roof. The thing was an oven before, now it’s comfortable most summer days with only natural ventilation. A single electric radiator heater keeps it warm in the Kentucky winter.

@zippydo2678 Жыл бұрын

Another hint about rodents. I put 8” metal flashing along the bottom edge of my mobile home skirting and it worked wonders for keeping the pack rats out. They did not seem to figure out that they could chew through just above the flashing. Believe me, we had endless packrats where I lived and this did work.

@greenfield1944 Жыл бұрын

I agree with you. R value calculations don't take into account the transfer of air mass. You can have a high R value but if the building is not "tight" it won't do any good. You proved that with the skirting. I'm an Engineer BTW, and I've built a few camps myself, and a few few houses and some barns. I'm 69 and still building stuff.

@arthurschuler8906 Жыл бұрын

In 1990 I did put it between the central heating radiator and the single window glass. In heavy freezing weather the glass frooze behind the hot radiator which stood a few centimeters away from the window! This insulation works perfect! Greetings from the Netherlands.

@HyPex808-2 4 жыл бұрын

You could use aluminum flashing to keep critters out and stick eps foam in between the flashing and floor to give you good insulation. People who build tiny homes do this to keep critters out as well

@kellyinfanger9192 4 жыл бұрын

Good suggestion. I am happy to see other commentors bring up the radiant barrier property of the foil. This probably is the most effective part of that product - especially when used with a dead air zone (1 inch or less) next to it. More heat can be lost through radiant heat loss than convection and conduction. I like using a radiant barrier along with fiberglass. Of course that requires a mouse proof installation. It is hard to State the R value of a radiant barrier product, because it provides an altogether different mode of heat retention. Consequently, I know one internet provider who radically overstates their R value. They lie, but the tremendous benefits are true - NASA has known this for decades.

@mbgrocott7115 Жыл бұрын

Bingo Kelly. You have struck upon the major reason this works so well to insulate. Until I read your comment, it was going to be the comment I added to the thread of others. It's why he made the right decision to put the material right to the underside of the subfloor of his other cabin.

@mama-cant-dance 2 жыл бұрын

I just put in a brand new raised floor in my barn's tack room. We put in this bubble foil before the plywood subfloor just like you said and it went in like a dream. Cut perfectly as well. I'm probably going to use this stuff in some of the walls as well before I close them up. I'm really looking forward to trying it out this winter. Thank you so much for your tips!

@armyguy9735 6 жыл бұрын

I don't know if I told you this before but my Grandfather use to grow mint herbs around the house and barn. He said rodents hate the smell. Now I never tried it but it just an old pioneer trick and with the extra, in the fall, he'd sprinkle the leftovers in the basement and root cellar to repel rodents. Love the video

@chuzzlesthegreat7784 5 жыл бұрын

That explains why both my grandfathers planted mint around the house when I was growing up xD Those suckers last for years. It's starting to produce less, so I might take a cutting and start over. It'd be neat to take some with me when my husband and I get a house.

@chuzzlesthegreat7784 5 жыл бұрын

Thank you for the tip! I thought it was just something to do lol Went great with tea and lemonade 😄

@baileydillion9331 4 жыл бұрын

As always excellent video. The bubble wrap here in Texas is called reflective. I live in an extended cargo van. My floor ceiling, doors and walls are all insulated with reflectics. Of course I have board insulation on the walls and ceiling. It definitely makes a big difference.My first winter in my van was miserably cold. This is my third winter now and it’s so much nicer. Still living in a can but with a little propane stove going every hour or so 10 minutes it’s heated up nice and cozy. I’m looking to buy a small bus and reflectics will be in there too. Thanks for the excellent information

@westrig180 Жыл бұрын

Common use for that stuff is in Pop up campers and TTs. for the windows. I used it when camping at Lake Mead late spring early summer where the sun angles in at the camper windows in the morning and afternoon I mean like 100 degs easy. I just mount up the foil panels and presto instant temp reduction. It works !

@davidmount3088 Жыл бұрын

Do you keep the cabin heated?

@demitaylor8873 Жыл бұрын

I have the same issue with cold and rodents. Also am in the woods. So this video is timely bit of advice since my finished shed will be delivered in 2 weeks. THANKS and know you have and are a blessing to me on this journey God has me on since retirement..

@thomashocker2792 2 жыл бұрын

I used 1, 1/4 foam insulation with foil on one side to repel rodents. It works great even on bottom of studs.

@mse7501 Жыл бұрын

Wondered if you could use both. Thanks.

@peterl4614 6 жыл бұрын

THERMAL BREAK - LOL, I watched you video yesterday and awoke this morning thinking about it (mamma mia!), and it dawned on me !! Thermal Break! The reason why it works better sandwiched between the floor joists and the decking material is because it creates what is called a "thermal break" - or - you broke the "thermal bridge" isolating the cold floor joists, which is basically the same temperature as under the cabin, from traveling through the floor joists to the decking material, making it as cold as the joists. By installing spacers, as you pointed out, you gained dead air space creating another thermal break, but you also picked up another benefit. The tin foil material has a tremendous reflective quality, reflecting the heat back into the cabin... how cool! Love your videos!

@LiveMusicOntario 4 жыл бұрын

Manufacturer literature advises leaving a 1" air gap. I don't know how that got over looked. This stuff works and of course it's so light to work with and easy to cut and staple. For R value properties alone it's probably not worth the premium but if depth is at a premium, or you want some vapor barrier effect with about no extra labor steps to do that in a 3rd step, it's really good.

@kathynj6479 Жыл бұрын

I just found your channel! I was wondering what to do about this in my little cabin and here you are! Thank you!! This makes so much more sense!

@joenadeau4419 6 жыл бұрын

I use it under the kitchen sink at our place in Maine. I just cut off a big piece and rest against the insides of the cabinet and makes a huge difference in keeping the pipes from getting cold. I also use it in front of the back door just as an extra barrier and you can tell the difference in fact I used a laser temp gun and it reads a few degrees warmer then the area without it. Its as good as you said it would be, nice tip, thanks again.

@wandahelmer1038 Жыл бұрын

We built our floor in two sections, our cabin is 20ftx20ft we sheated the bottom with treated 1/2 inch plywood 2x6 joists with fiberglass insulation we flipped the floor over onto to foundation sheated it again with 1/2 inch plywood then laid 3/4 inch sub floor over that and built the cabin, that was 2001, no rodents in 22 years. What a warm building it will stay warm with the smallest fire. And very quiet inside. Love our little cabin.

@keithhogan6997 4 жыл бұрын

I was skeptical at first as to how it would work, but then as you explained it it began to make more sense. I would use it underneath for a retrofit fix, but the idea of inside underneath new flooring I definitely would not do unless you use some really thick flooring like 3/4" minimum or else you will end up with sagging between where its nailed to the joists. I may be wrong, but I'm not seeing it being worth the added expense when I could spend far less putting the bubble foil in, even putting insulating foamboard between the bubble foil and flooring from underneath it would still be cheaper with no risk of sag. All in all a good backwoods video. 👍

@gregwarner3753 4 жыл бұрын

I have used this stuff on the cold side of a stub wall containing plumbing next to a cold attic. Pipes get cold but do not freeze. Good stuff.

@anniereddj 3 ай бұрын

Came here on recommendation from the Kyle's cabin channel. He had lots of praise for you And I can see why. So naturally I subbed and look forward to many more of your videos. Thank you for the information and videos you do!

@thebossoftheswamp 3 ай бұрын

Awesome! Thank you for subbing and welcome to my channel.

@vstarcruiser7141 Жыл бұрын

Nice job Buddy! I glued this product to camper shell ceiling just so my passenger didn't have to roast in the summers heat blast.... My Dog she loved it!

@pieceworkstudios 6 ай бұрын

I think that's the best use of it yet. Got to take care of the furry friends 👍

@phyllismccurdy2984 Жыл бұрын

Thanks very much for your video. I’m going to install the foil bubble wrap under my little cottage this year. Can’t wait to see how it works. Phyllis 🇨🇦 Stay safe and well.

@betsytraughber1870 5 жыл бұрын

We had this insulation installed in our attic and it made a huge difference in our electricity bills!

@winnipegnick 4 жыл бұрын

Can you explain how you used it in the attic? Thanks in advance.

@BOBPortlandOr 6 жыл бұрын

I build Micro Houses and we use an aluminum foil used in radiant floors along with insulation. When installing the foil between the joist we install it with a swag, this forms a radius airspace which reflexes the heat back into the room, airspace is a must, works great. I find it is much easier to access the crawl space from inside the home eliminating rodent access to the crawlspace. Another benefit is we also install floor storage bins for room temp items and below them coolers. Coolers are counterweighted allowing for easy retrieval.

@j.s.613 6 жыл бұрын

This is good stuff Boss, I worked in a machine shop one time and built a temperature controlled heat cabinet for drying small fresh painted aircraft part. I made it out of wood and this bubble wrap stuff. We heated it with only 3 heat lamp bulbs and we could maintain a consent 225 degrees inside with a few other little gadgets to help circulate the air. To say the least all the employees were pleased with my job of building something that would have cost the company $25,000 or more to order. So yea I rank this high on the list of excellent insulation. Good job using this on the cabin, you made the right choice.

@trafferz 4 жыл бұрын

Brilliant! Exactly the solution I was looking for to solve the exact same problems for a country house in Japan. Can't wait to give it a shot.

@jerryhegarty9650 6 жыл бұрын

Gamechanger for sure, using the same technique at our cabin and could not be happier !

@Benmelech 10 ай бұрын

I’m 81 years old and in the process of building a 15 x 30 shed for my daughter up here in Idaho mountain country. I saw this video years ago when the boss first produced it. I just remembered the bubble wrap segment and decided to revisit it. So so glad I did it. I almost was going to Home Depot and get CLEAR bubble wrap. Had I not visited my dear old friend the boss, I would not have thought to use “FOIL Bubble wrap”. Thanks again boss for all your amazing videos. You and your dear wife are one of a kind.❤ Footnote: Boss, as you know, the Lord said he’s building us a home in Heaven. I believe he’s going to use you as one of his lead foreman…. Might even ask for your advice, along with your missus, especially in the garden ❤❤♥️.

@johnprocidano8016 Жыл бұрын

i used the same material stapled to the bottom of the sub flooring in my basement and can tell you it works wonderfully. This was done about ten years ago. Easy to deal with and easy to cut.

@kimbertolson298 4 жыл бұрын

I wrapped this stuff around my water heater. Made a big difference

@mspat8195 4 жыл бұрын

Now this, is something for us all, no matter where we live!

@mikegto65 6 жыл бұрын

We used it also...wonderful idea. Like you we use it for everything. A lot for affordable than batt insulation. The 24*24 cabin only took 200 dollars to do...no iching.

@arlittleredfox7671 5 жыл бұрын

Thank you! Exactly what I am looking for. And you can seal it with that silver tape. (The tape used around A/C units.)

@firstlast2034 Жыл бұрын

I have used double bubble (R-11) since it first came out. it is also water resistant and added regular insulation you have a wonderful insulated area!

@suzaygrenis6044 Жыл бұрын

Double Bub half the work, twice the pleasure. Single Bub is great to cover windows that are not often used, let in too much heat or cold. - Cut it larger to fit in the sill and also on both sides, and enough larger on top depending on your window. RV vents- I'd Dub Bub. Have even put it under the mattress pads- not silly! Reflect your own heat back to you. Or to use camping also.

@themodernadventurer4320 4 жыл бұрын

I live in a very humid travel trailer and will also add that the “bubble foil” will not mold. The metal window frame where I have it grows mold but many years later the “bubble foil” never does.

@rstephe 4 жыл бұрын

I live in the Southern part of the US (North FL) and use this to insulate my shop. No moisture build up and changed my AC holding ability overnight. Not sure where you got your info but I have proof that your comment is wrong unless your allowing water to penetrate.

@JacqueReynolds 4 жыл бұрын

I had to laugh at this but I am soooo grateful too! I am a 69 year-old grandma with no earthly training in building things, but my dad, well, he was a marvel...he could come up with things, inventions, that were genius! Now, to why this is so funny. I just bought a small shed, roughed in, and I wanted to insulate the floor and walls without losing a lot of space. I bought some of that, exact same, bubble foil, rolled it out on the floor and everyone laughed at me. But it worked! Now I am ready to put it up on the walls, just like you said! Thanks for giving me some faith in the common sense reasoning that my dad passed along to me. 😁

@thebossoftheswamp 4 жыл бұрын

I insulate my walls with regular fiberglass insulation but the foil always goes in my floor. Good luck with your project.

@dawnaodonal3451 5 жыл бұрын

Thank you, Cousin Jim, for sharing so much of your amazing simple lifestyles with the world. We all should learn to slow down and look at what God has created free for all to enjoy. Nature, what more could we ask for. I am so proud you are a part of my roots. The apple doesn't fall far from the tree. Your video on "How to insulate a cabin floor and keep it rodent-free was very informative". Hopefully, in the near future, we will be able to apply the wonder foil and install a skirt for our camp up in Maine. We also LOVE our lifestyle in the forest with the shelter of our Log Cabin. Dreams do come true with alittle ingenuity. There was a small dusting of snowfall in Weare NH this morning. We have plenty of mice traps for the time being down in the cellar. God Bless

@thebossoftheswamp 5 жыл бұрын

Good to hear from you Dawna. Skirting the camp made a huge difference. It's actually more important to insulate the skirting than the floor itself. Hard to believe but true. What I have done here is how i will continue to do it from now on. A big YAY for bubble foil :-)) God Bless :-)

@lostnation5348 6 жыл бұрын

My place in Maine has no insulation under the floor. I think I will give this a try. Thanks for sharing the info.

@thebossoftheswamp 6 жыл бұрын

Skirting makes all the difference in the world.

@nancythornton2947 3 жыл бұрын

I'm gonna try also on my camp. In western PA

@bw7057 4 жыл бұрын

I’m on it! Have a cabin in my orchard for my pickers. Will be using the bubble wrap this summer to re-insulate the floor. Thanks for the video 👍🏻😎

@pauldubay667 9 ай бұрын

I just did my cabin porch 10 x 20 sub floor an all the joist an a curtain around the bottom with the foil. I use a 30,ooo btu Mr Heater. For my 20 x 30 ft cabin. What a difference from last year to this season I'm in VT. At 32 degrees I can get the cabin up to 80 degrees in less than 2hrs. Thanks for the video it really works.

@thebossoftheswamp 9 ай бұрын

That is awesome! Thanks for the success report :-)

@LadydogC Жыл бұрын

No rodents that I know of but had a shed built for my now home. Floor cold so I know to get bubble foil and get under my home and wrap it! THANK YOU!

@dallas_red904 6 жыл бұрын

Love this idea, have a house built in 1940, the wood floor has no isolation so am ordering the bubble foil for just below in the full basement, won't be all that bad to install, might hire someone to do it since we are in our mid 60's and having arms up like that on ladders might not be such a good idea (Could be hospital bills LOL), but heating this house is a nightmare and always feel the air from below. Thanks, will let you know soon as I get things going.

@thebossoftheswamp 6 жыл бұрын

This stuff changed my life. I'm finally warm now :-)))

@TheTamrock2007 5 жыл бұрын

Dallas_Red did you use the bubble foil?? How did it turn out if so?

@narrowstripsawing9595 Жыл бұрын

Thank you very much for sharing your experiences!!! I'm planning on building a small cabin to see if I can and will definitely go this route!!!

@chadlebbing4960 Жыл бұрын

Residential contractor almost 30 years. I like it. Good video.

@andrewwiggin Жыл бұрын

An incredible video. I am watching in 2023 and it still is incredibly useful.

@rosielee6390 6 жыл бұрын

Me and hubby used it when we build our cabin last summer. Thank you for sharing Boss.

@maehay4065 2 жыл бұрын

I absolutely love watching your videos. I have watched so many I’ve lost count but as long as you keep making them I’ll continue to enjoy and hopefully pick up a few tips to apply when I get to my brother’s off-grid land. Many thanks and God blessings to you and yours.👍

@thebossoftheswamp 2 жыл бұрын

Thank you my friend and I always enjoy your comments :-))

@carologwin1103 5 жыл бұрын

WOW, I have been battling this problem since I bought my manufactured home. It does have brick foundation. I even have to replace all the air ducks as they got in them and have not been able to use heat or air due to the smell when it is turned on. I have been looking into howto re do things and prevent them doing the same thing over again. I believe this is the answer for me. Thank you so much.

@thebossoftheswamp 5 жыл бұрын

don't let anybody talk you out of using this stuff. I have NO issues and NO regrets.

@andrewcarter7866 5 жыл бұрын

I just built a 12x16 cabin (camp, we call them around here). Based on your video, I laid reflectix on my floor joists, then 3/4" tongue and groove OSB. I haven't laid anything down on the OSB yet. Thank you so much for this video......it was -15c the other night and my floor (nothing but reflectix and the OSB..no skirting and about 2' off the ground)) was nice and warm on my bare feet. It's exceeded my expectations, actually....I had decided that even if the floors were still a bit chilly, it beat laying awake at night listening to mice.

@madawna 2 жыл бұрын

Hi Andrew. Did you use any spacers in-between the floor joists and subfloor? I really appreciate your above comment. Thank you.

@andrewcarter7866 2 жыл бұрын

@@madawna No, no spacers between the joists and the sub floor. That was a couple years ago, and I'm very happy with how it's performed. I've since put click flooring down with a thin foam underlay. It's been great.

@madawna 2 жыл бұрын

@@andrewcarter7866 Thanks for your reply!

@jeep4ron 6 жыл бұрын

You were the first to turn me on to this stuff. And I have loved it ever since. Keep getting more and finding different uses for it. Thank you.

@larryjacobs5713 6 жыл бұрын

Thanks Boss, don’t know if I can crawl under but I will give it a try

@Frugal_granny 6 жыл бұрын

May need to try this on the drafty cold foundation walls of the cellar. Thanks for sharing

@stacyjensen6839 3 жыл бұрын

We built a cabin this summer in Interior Alaska... MANY thought we were nuts to do our insulation this way ( we were also a little skeptical) we went ahead and did it anyways!! Today we woke up to -37 degrees and our floor is as warm as it would have been for the expensive, labor intensive regular way of doing insulation up here...THANK YOU so much for putting this out there. It will be a game changer in our community!

@thebossoftheswamp 3 жыл бұрын

It's amazing stuff isn't it?

@TheChadWork2001 4 жыл бұрын

Thanks for this information. I know those who won't believe don't believe. I believe you.

@drsw4187 4 жыл бұрын

I used bubble foil in the roof of my 1971 Oldsmobile 442 15 years ago then installed the headliner. Didnt do any tests but seems to work very well.

@gumbynomad 4 жыл бұрын

I've looked for a good series on cabin building and this is perfect! Answers all my questions (even the ones I didn't know I had yet!). Thank you so much for posting. Keep it up!

@davidmount3088 Жыл бұрын

Do you keep the cabin heated?

@job38four10 4 жыл бұрын

@9:24 you showed exactly what I wanted to know and will try the same thing, and on my next house addition I will first put that bubble foil down on sub floor like you said. Great info thanks for sharing!!!

@PANDAMANImpressions 3 жыл бұрын

Smart! Me too. But I believe The Boss said to lay it "over the joists" & "Under The Subfloor"

@mst5632 6 жыл бұрын

Nuggets, JC. You just keep leaving these little gold nuggets after you pass through. You’re like a man sized leprechaun! Thank you my friend. God bless.

@michaelw.urbansr.8617 Жыл бұрын

Hey bud i have been a builder for years and your suggestion is a great one. Although your basically building a sub floor. So what i would do is cut the strips the same size ,about 1/2in thick but then i would use 13/8's to 1/2 thick bi-fold insulation in between the strips. Or you could use the same bubble insulation and lay one layer across the whole floor and strip it out on top of that layer then duble it up in between the strips as well to increase the insulating factor of it. Great idea though. Although when i get my structure on my land, once i find and buy my land in Eastern T.N. i will be doing the same as you. Pilings with a cabin on top with with enough room i can insulate both the under side of the structure on the extieror as well as inside! My wife will be building it for our retirement so its going to be a decent sized cabin as well as a two story! lol this is going to be our dream cabin in the woods! Just gotta fine the damn land??? :>/

@thebossoftheswamp Жыл бұрын

Hi Michael. I'm working on a followup video on this topic and sharing my experiences with this after 5 years of installation. Stay tuned :-)

@canesser1 6 жыл бұрын

Love your "backwoods logic". A genius with a lot of hard experience behind ya. Blessings from the Great White North!!

@bahnsidhes 2 жыл бұрын

My friend and I are buying a piece of property with an existing cabin, up close to the Canadian boder, that's roughly 70-80 years old. It was really well built. The foundation is just like yours and I was concerned about insulating it and rodents. This video has helped so much. I've insulated with reflectix and found it to be amazing. So this isn't a stretch for me to believe in. Thank you for the video.

@thebossoftheswamp 2 жыл бұрын

It really works well doesn't it. This is all I have for floor insulation in all of my structures and don't plan to change :-)

@kuzadupa185 Жыл бұрын

Back in the day they had heated floors too. As far back as the romans! A tunnel, small, maybe 6 to 9 inches high (on the inside) made with brick work would be made first, and this tunnel would try to wind the long way through all future rooms and floors. A floor would be made on top of this brick tunnel, typically out of stone but wood was also used. The brick work tunnel would have started on one end. Which is where a sort of brick fireplace would be made, and a stone splashguard that seperated the house from the fire and any potential embers which would jump and crackle into the air. The air would be heated and because of the law of thermal dynamics, this would create a suction effect on the hot air, which would be sucked through the tunnel beneath the floor, and exit at the other end. While the hot air moved through the tunnel beneath the flooring, it would transfer heat and heat the flooring and even the walls too! (If some rooms needed MORE heat they would have the tunnela from beneath the floor be extended upwards and then back down again at the next neighboring rooms walls, forming a loop. You could even have a method of closing off the vent with a slab of dried wood that was pushed/pulled in and out, allowing hot air or stopping it! Id love to see something like this replicated with a hand built log cabin today!

@LiveMusicOntario 4 жыл бұрын

I was aware of this material probably by the late 80's and applied it for the first time around 1995 for a sunroom built above ground. The directions say explicitly to leave a 1" air gap between the warm side, i.e. usually your interior (DEFINITELY in Ontario), and the face of the foil. At least that was the literature supplied in Ontario, Canada. That's not a novel application suggestion. I forget the equivalent R value of the wrap but that 1" gap helps let the reflective foil do its thing to hold in radiant heat, not just conductive heat. Think about it. If it was only the bubble wrap doing the insulating, it wouldn't be skinned with foil. I did "belt and suspenders" insulation. Fiberglass batting AND the bubble foil. - on the exposed floors, stapled the rolls to the under side of the floor joists and taped the seams with aluminum foil to seal it from rodents, etc. on the inside, I stapled a zig zag web of cheap poly twine to have the batting suspended with an air gap above the bubble wrap, then carried on flooring. On the walls I put in the batting first. i didn't bring the batting out to the edge of the studs. I left depth so I could put in bubble wrap that was stapled into each stud space back one inch from the edge of the studs, for that 1" air gap before drywall.

@georgedemean2228 4 жыл бұрын

Excellent point about the one inch air gap. 👍 If you tape all the seams it will make an excellent vapor barrier also...

@ohhboohoo1634 4 жыл бұрын

I used this as a layer over my 50mm celotex foam to act as a vapour barrier as well as hoping it would also add to the insulation value in my self build motorhome. Cant say if it has added insulation but it makes my mind think it has. Love your videos man, especially the one explaining how you make your money... although I wouldnt give these people the time of day in explaining, it's none of their damn business. 🏴󠁧󠁢󠁥󠁮󠁧󠁿🇬🇧👍

@kiroc89 3 жыл бұрын

This is the solution I’m using for a raised cabin on my property. It has deck flooring inside with just a screen. I was stuck on ideas to insulate the floor but this is what I’m gonna do now, thank you!

@thebossoftheswamp 3 жыл бұрын

Good luck with your project.

@j.danaclark89 6 жыл бұрын

I have been told that that stuff only has about the same R value as a 3/4" sheet of plywood. But I've gotta system I don't for a second believe that. We keep bees in Canada and we have had two similarly sized hives sitting side by side, one with a 3/4 plywood lid and the other with that bubble foil. The plywood had melted the snow on top and the foil hadn't. It was a noticeable difference inside the hive too. The one with the foil was clustered up against the foil, which should have maximized the thermal transfer. But the plywood hive had clustered down lower which should have minimized the heat transfer. It's dang good stuff that foil.

@thebossoftheswamp 6 жыл бұрын

The simple R value is crap but the reflective properties of this stuff make it awesome. I don't care what people say... my warm floors are all the proof I need :-))

@j.danaclark89 6 жыл бұрын

TheBossoftheSwamp OFF GRID SELF RELIANCE and our bees are getting a head start in spring because of less dead bees!

@faelwolf1177 6 жыл бұрын

When I built my shop (an enclosed pole barn) I had the roofers put a layer of this right over the rafters before putting the sheet metal roofing down. My shop remains amazingly cool in Florida summer, even with a metal roof. It's like sitting in the shade. This material works amazingly well. I feel stupid for not thinking of it for a cabin floor. I'm looking to get some land in the back hills and building a retirement cabin in a few years, I will put this to good use. Thanks for this video! I would only add a recomendation for rock wool insulation for the walls. It is rot proof, bug and termite proof, and won't burn (has the same fire rating as concrete, 4.5 hrs+). It also lets the walls breath. You may need to add a vapor barrier on the appropriate side depending on your climate, as it breathes very well indeed.

@thebossoftheswamp 6 жыл бұрын

I used some of that in the wall behind my woodstove. Good idea about putting it beneath the metal.

@jheremck 6 жыл бұрын

Rodents are crafty little critters ... they probably have blueprints of the cabin, trying to make an invasion plan… little do they know, they’ve been out smarted… lol ~

@jamesmoore1341 8 ай бұрын

I'm glad I ran across this. I just purchased a little cabin with nothing but a sub floor. I will definitely be using this before putting down the hardwood laminate

@billwilliams4877 8 ай бұрын

How has it worked?

@jamesmoore1341 8 ай бұрын

@billwilliams4877 I have had the chance to lay it down yet. I won't be home for another 1.5 weeks. It should work well as both a moisture barrier & wind/air barrier. Especially after taping the seams of the Plywood floor. Right now my floor joist insulation consist of rolled insulation under the bottom with an over layment of chicken wire to keep large critters out.

@andrewdisney8475 Жыл бұрын

A radiant barrier works even better with taped edges and joints! BUT you better figure your ventilation property! Insulate the walls and wrap it in Mylar bubble wrap!! Great video!!

@luanneboucher8536 6 жыл бұрын

Great information! I’m going to insulate my floor in my 16x 24 camp in northern Maine like that as soon as it warms up. Thank you and take care ! 🙂

@cplaw3 6 жыл бұрын

That stuff has sooo many uses... you could make a whole video series. Keep up the great work boss! 👍

@featheredcoyote5477 6 жыл бұрын

I used his method from here 2 yrs ago on my tiny cabin floor. So far, rodent free and floor stays warm. I'm on pier and post foundation without skirting.

@thebossoftheswamp 6 жыл бұрын

Skirting will make all the difference in the world.

@featheredcoyote5477 6 жыл бұрын

TheBossoftheSwamp OFF GRID SELF RELIANCE I can only imagine!!! I will take your advice and put this together by this fall. Thank you for everything you do for us!!

@samuelkoebbe5638 11 ай бұрын

Hey Boss. Wanted to say thank you for all the helpful tips. Been watching you on and off since I was a kid, probably going on 10 years ago now. I had commented at one point about how I wanted my own cabin someday, you surprised me by actually replying and wishing me well with my dreams. Made my day lol. Well, fast forward several years, and my dream is finally coming true-my fiancee (soon to be wife) and I are finishing up our own quirky but perfect little cabin in the woods. We used the bubble foil in our floor per your recommendation. I think it will work great. Thanks for being one of the real ones, and for all the inspiration. Rock on man.

@thebossoftheswamp 11 ай бұрын

That's awesome Sam. Congrats on your dream fulfilment. Don't stop there though... fulfill them all. Rock on :-))

@aheadsup6492 6 жыл бұрын

I have heard alot of good things about the reflectix and also foam insulation over fiber glass but now im convinced. It probably worked better as a sheet of between the sub floor and the joist better cuz it also insulated the floor joist themselves. At least that my guess. Anyway thanks a million for showing this its a definite time and money saver.

@cajuncritter8822 6 жыл бұрын

We all make mistakes and mishaps all through life,that's how we learn.Thank You Sir for sharing your good common sense with us.

@villagelightsmith4375 Жыл бұрын

Ho-Kay, I live smack dead center of a mega-grid, powered by the Bonneville Dam on the Columbia River. Our little mapsite is called Portland, Oregon. We have a very temperate climate with most winters hitting 30 degrees f for a few days, summers up to 100 for 2 or 3 days. Moderation in everything. I double-stuffed the walls and ceilings with cellulose everywhere it would fit, and we heat/cool our 1200 SF "cabin" with c@ 400 gallons of oil per year. The nearly continuous siding, composite over wood over sub-siding helps too. That may be good, but good ain't good enough. Your stuff works, and I'm about ready to install it. Now. When people come around trying to sell us new windows, siding, or exterior treatments explaining how much lower our heating bills will be, I just invite them in for a cuppa joe, run the actual numbers in front of them and ask if they can guarantee me a yearly check when our bills fall into the minus department. For your own amazement and amusement, reference "Burning Man," the annual hippie Art Festival (Black Rock City) in Nevada. God made summers there just in case HeII wasn't hot enough for some people. Then look up the construction of the "Pentayurt" or "Hexayurt." For soft-walled tents I use Stephenson Warmlite The principles work. We have amazingly efficient thermoregulation ... all we need to do is learn to use it.

@whatever1279 Жыл бұрын

We have a crawl space under our house. Heavy road Construction caused rats to escapt the sewers into our neighborhood's. Under the Pest Control gentleman advice which we followed. He suggested we dig 20 inches down into the ground around the perimeter of our house and secure 1/8th inch wire mesh (we bought at tractor supply) and 14 inches up the wall and 20 inches out. We back filled the trench we dug around the house. Its been 6 years since we did this and never have had any mice, rat under our house since.

@stephenlees9752 6 жыл бұрын

I use a product here in Darwin called Insulbreak 65 by KINGSPAN, it is an air-cell type product and is the best thing for roof & wall insulation. Instead of the little air pockets it has the silver foil both sides of a beer cooler type product. Great stuff, the thing you keep learning in the building industry is great, just the other day i learnt that Fucking Architect was no one word!! Good stuff JC.

@littledirtpatch...2668 6 жыл бұрын

Will definitely be using this when we move to MO. Thanks for showing different options as we are unsure what type of dwelling we will end up getting. Thinking about a 14'x40' metal shed & finishing out the inside so flooring could go either way. Love your videos! God bless ❤

@BonnieBlue2A 6 жыл бұрын

LittleDirtPatch . . . You will need a basement or storm shelter in MO for protection from tornados. Something to consider....

@1shaneeka 2 жыл бұрын

What did you do? Did it work well?

@conniecoffey8615 Жыл бұрын

Thank you so much for this video. I bult a 12x16 tiny house and been racking my brain for this solution. IT is perfect.

@podamis314 6 жыл бұрын

I ran it across the studs and then put 4 ft wide rolls of 1/4" hardware screen over it. More insulation with the air space included. Screen cost was about 50 cents per sq ft. Could be done for less using 1/2 inch

@Romans828girl Жыл бұрын

This is an excellent idea. 1/4" hardware cloth is now about 67 cents per SF -- well worth it, in my opinion. Thank you.

@HoneyHollowHomestead 6 жыл бұрын

I watched your first video where you discussed this insulation, even ordered a roll of it to experiment with for outdoor cats. Thank you for talking more about the instillation of it on existing cabins.

@kimpozo3514 Жыл бұрын

IDK. I live in 1969 mobile home in country and I see animals use fiberglass insulation for nesting,but I can't see bubble foil to be warm. I spent thousands dollars on R10 2 inch foam boards insulation and I'm not seeing it any warmer. ?

@tomforeman4976 Жыл бұрын

1969 they didn't have this techno. so don't live in that Era now update if it is proven.

@almaburns6562 Жыл бұрын

Honey Hollow Homestead How did you use it for your outdoor cats, & did it keep them warm? Also, any thoughts of how can I apply it to the unfinished wood walls of a utility room to keep cats warm?

@HoneyHollowHomestead Жыл бұрын

@@almaburns6562 This was 4 years ago! Cats like small spaces. You can line a cardboard box with it using double stick tape, don't forget to do the top and bottom. I'd put some sort of towel or cloth of some kind over the floor so the cat isn't laying directly on the plastic. See if your cat likes it.

@almaburns6562 Жыл бұрын

@@HoneyHollowHomestead Yes, I realize your comment was 4 years ago but still, I hoped you'd answer, so thank you. I'm hoping it does make the box warmer, although there is no air pocket between the box & the foil.

@davidadams6811 6 жыл бұрын

very good tutorial. I believe I will give it a try on my next build. God bless!

@David-rx2to 6 жыл бұрын

I'd spray foam the underside of the floor. You can buy a kit online for about $727...two tanks about the size of a 20lb LP container...they mix together in the hoses that feed the spray nozzle. One kit will do 560 square feet 1" thick. Closed cell foam will not absorb moisture, is impervious to insects, rodents and air infiltration, looks easier to apply than stapling up that bubble wrap, and has a greater R value...about 7 per inch.

@victorbunch7725 Жыл бұрын

I totally agree, I use to sale those Mennonite cabins, That is where i got to know about the Radiant barrier insul, In the roof it will reflect up to 97% attic heat and reflect 97% into the living area! amazing stuff,,, Thanx for the vid.

@TheArozconpollo 6 жыл бұрын

I didn't hear it mentioned but the bubble foil is more than air, the stuff reflects infrared heat back into the living space. So while you may compress the stuff between the subflooring, it probably won't make a huge difference. The reflective nature of the material also explains why putting it between the joists isn't as effective. The surface area of the top of the joists as a proportion of the total floor space is not insignificant. PS we use this on our boat for insulating the ice box and for insulation between the berths and the fiberglass.

@thebossoftheswamp 6 жыл бұрын

Yes, blanketing over the joist creates a thermal break and works better than in between them.

@Romans828girl Жыл бұрын

@@thebossoftheswamp What if, instead of cutting it in strips and stapling between the joists, you stapled it to the floor, then down around each joist, so that there would be a complete thermal break, but it included the joists above it? Is there any reason not to wrap the joists in it?

@thebossoftheswamp Жыл бұрын

@@Romans828girl The best way is to blanket the top of the floor joist before the sub floor goes down. I wasn't able to do that with the old camp because it was built ten years before I was born haha. I'm working on an update that I will release very soon. It shows the results of this after 5 years and covers many of the questions that have come in. Stay tuned :-) To answer your question: Wrapping the joist will serve no purpose that I can see.

@Romans828girl Жыл бұрын

@@thebossoftheswamp I appreciate the response. The purpose for me would be that I intend to have a building built by a local company, and then I will finish it out as a cabin, so the subfloor will already be in place. My choices will be cut the bubble foil in strips and staple between the floor joists, keep the bubble foil continuous by wrapping the floor joists from underneath, or removing the subfloor to put bubble foil between the joists and floor. If they screw the sheets of plywood subfloor down to the joists without gluing them, my easiest route might be removing it, putting in the bubble foil, and putting it back.

@almaburns6562 Жыл бұрын

@@thebossoftheswamp Is there an air space between the floor joist & the sub-floor? To be effective, does there always need to be an air space of 1" or less?

@centerhice7948 3 жыл бұрын

Your awesome ,thank for the vids ,very helpful ,I just started my journey 8 months ago ,like you health issues made me want to do this as well. It ll be a slow process for me ,due to funds and lack of hands, but I m enjoying the process .You are in my prayers ,I hope your health improves . Anyway thank you for the inspiration and ideas very helpful. And just ignore the haters .God bless you Lori and the dogs .

@thebossoftheswamp 3 жыл бұрын

Thank you and blessings to you as well :-))

@centerhice7948 3 жыл бұрын

T y for your reply

@LostCaper 6 жыл бұрын

I used it to and it has amazing r value. They only rate it 7 or so but it seems to has other property like the reflection of heat. I made a tractor cab and use that stuff. You could feel your own body heat reflecting back at you and man did it keep the cab warm. Only thing was when there was a car behind you when it was dark the car's light shined on the reflective material and it looked like I was going to be run over by 10 big trucks. Lights reflecting everywhere.

@davidwilshusen4332 Жыл бұрын

Wow, Wow, wow. You have resolved my forever problem. Cold floors no more. Can't wait to put it into action. Have struggled with the same insulation situation. Thanks so much for the wisdom

@maineiachomestead7550 6 жыл бұрын

I went with Reflectix on my cabin after your video about it a couple years ago. I stapled mine to the underside of the joists tho and backed that up with 1/4" hardware cloth for extra rodent deterrence. I will be putting in an above the floor radiant heat system next year for guaranteed warm tootsies all winter long.

@martyw5721 4 жыл бұрын

LoL... Thought I was the only one that used this stuff for everything. We have put it under metal roofs for years.

@brysondockrill4378 3 жыл бұрын

In my experience, the radiant barrier is somewhat effective, but for your dollar, rigid foam insulation secured between joists then gaps filled with spray foam is much more effective. You can often find used roof foam from industrial buildings for considerably less than off the shelf prices.

@thebossoftheswamp 3 жыл бұрын

I will never do that again. After dicking around fitting in the foam and all that jazz, the ants and mice destroyed it. The foam board is all yours :-))

@brysondockrill4378 3 жыл бұрын

@@thebossoftheswamp Your mice must be particularly persistent little bastards if they're eating rigid foam. I've never had insect problems with it, but can imagine it would be a deal breaker. I'm north of the border, so perhaps it's down to the climate.

@MrHammGutsnGlory Жыл бұрын

thank you for making this video. I made a shop above ground and never insulated the flooring. Now I am turning it into an apartment and was looking around the internet for insulation and came across your video. I am gonna try it.

@thebossoftheswamp Жыл бұрын

Glad I could help. I have a recent update on this topic that I think you will find beneficial. Enjoy. kzfaq.info/get/bejne/jcdiYKmIpt3bhY0.html

@cjdavis825 6 жыл бұрын

Think I'll do this to the barn and lean to when I move to Michigan in a few weeks Great Stuffs Boss.

@aheadsup6492 6 жыл бұрын

Ahh good ol Michigan, We welcome you.

@cjdavis825 6 жыл бұрын

Thank you .

@kheventplanner 6 жыл бұрын

Welcome to Michigan,she's a beautiful state!

@ssstults999 4 жыл бұрын

So a year later, I'm wondering how you like it here in Michigan

@AmysAutopsyReport 6 жыл бұрын

Great video! I'm keeping track of all of this for when I have my cabin built someday!

@danb4034 Жыл бұрын

In my enlosed/skirted space I did put a plastic sheet covering the ground to stop some of the moisture from the ground to get under my building and help prevent rot.

@thebossoftheswamp Жыл бұрын

I do that beneath some of my structures but here at the camp, I'm trapping the ambient temp of the ground beneath the cabin. I store food in vessels under there and a tarp on the ground would block the ambient temp, much like a blanket does when hung between 2 rooms.

@wendelljohnson1884 6 жыл бұрын

I WAS GOING TO DO THE SAME THING WITH FOAM ON MY INSIDE FLOOR NOW IM TAKING YOUR ADVICE. FOIL WRAP AND THIN STRIPS THEN TREATED PLYWOOD IN MY CABIN ITS 14X32 .THANK YOU AND GOD BLESS FROM SOUTHEAST TEXAS.

@jayejaycurry5485 6 жыл бұрын

I've been wondering how that might work. Thanks. You've confirmed what I had hoped would work. I also was thinking of using the bubble foil on the sub-floor with1-inch of foam and then the floor over it. That should keep your bubbles from being mashed flat and provide more insulation.

@aNuthaRedneck Жыл бұрын

If you use the foil with no airspace you might as well just use the styrofoam alone. It needs space. Otherwise plain aluminum foil from grocery store does the same

@jayejaycurry5485 Жыл бұрын

@@aNuthaRedneck The foam and foil do two different things. The foam resists conductive heat transfers, while the bubble foil reflects radiative heat. An air gap isnt necessary. You could use foil from the grocery. That would be rather expensive, and very inconveient. If you wanted to use a sheet instead of bubbled foil, it's better to just buy foam with the foil glued on at your building supply store.