Yeah There's a middle section and I think the end where my remote wireless microphone died. Working on a replace for better audio for sure!

Yeah right in the middle the background music goes really high, I was just watching on TV vs my typical phone and noticed it

@@jkowalcz Thank you for thr input. Also been working on learning an audio plug in for Adobe Premiere called Alex Audio butler which seems to have a bit of a learning curve.

I haven't experienced any issues the insulation doesn't add much weight

doesn't weight much ✌

Yeah prices suck in certain areas for sure!! But for $110 or so you can have a warmer or cooler garage without buying a $1000+ worth of insulated garage doors and then having them installed.

Sorry thought I responded to this sooner this is what I used and seems to work well at keeping the draft out and critters also amzn.to/3FlGOHb

I have had 2 garage doors in different houses have a good 4" strip on one side where the gasket does not exist between the garage door and cement floor. I have found that I can cut a piece of dense Styrofoam and just glue it to the bottom where it is missing. It works great. Stays in place and lasts a long time. Much cheaper fix then buying a whole new seal.

In your situation I'd put the reflective side out you'll still get benefit of insulation but it'll reflect that summer heat better I'd think

I live in NC also. And can't decide between this reflective insulation or the white Styrofoam.

@@mightyagaming9887 I'd go refective and put the Shiney side out to reflect the heat

@@YourCouchsucks Thanks for the response!

@@mightyagaming9887 no problem happy I did what I did has made a big difference for sure

I guess you could, though pulling them in and out may damage them,. That said insulation board isn't all that expensive so you could have extras on hand

If you're referring the "man\women door" not the overhead doors, not really sure? If it' not already an insulated core door and there isn't a windows I'd consider cutting some of the same insulation to that door size and then use double sides tape and tack it onto the door. I only have the overhead doors so.....

I haven't made any adjustments to mine. The insulation isn't overly heavy. If anything it actually helps my doors closer a bit tighter at the bottom edge

Don't have specifics but for me it's noticeable cooler in some and warmer in the winter. I just installed a mini split so anything helps not lose energy

@@YourCouchsucks no offense but there are tons of videos doing this and it’s really a disservice to not include temperature deltas. Having said this, thank you for making this video. Install was clean and well done.

Ramesh pretty sure it was this www.homedepot.com/p/R-Tech-1-in-x-4-ft-x-8-ft-R-3-85-Insulating-Sheathing-320821/202532854

If you want to stay cooler because you live in a warmer area I'd put the foil side of the insulation facing the outside (reverse of what I did). I'd still use the foil tape to hold everything place

@@YourCouchsucks Thank you so much!!

I live in Ga. In gets Hot in the summer but lately it gets really cold in the winter. What side should the insulation face?

You "might" be able to cut the foam to size and us strong double sided tape. Though I haven't tried that

It's used to seal up the gaps which in turn works to keep heat in or out..

Bought that at lowes or home depot

Hello not sure what you're asking?

For my purpose even thought the fit pretty tight I used the tape to seal any air gaps. You could probably do without it