Thanks for taking the time to explain the whole process. I feel way more confident now in tackling the job myself. Cheers

Wow awesome video, you made it seem so much more simple than other people do. Much appreciated thank you.

you guys are so lucky to get the ranger raptor out there! every ford fan in the states watching is jealous right now.

Thanks for the tip will put a bar on my standard ranger this coming winter. When you are all done nice to see some night footage inside and outside cabin. Cheers

Awesome vid loved it. Just added tip when running the switch, take it over the back of the engine along the bottom windshield in engine bay, and then thru the other firewall, the Stedi harness reaches that far. easier than putting it thru more carpet / interior stuff.

Great video. Still valid after 3 years. Very helpful when you did the quick connect just to show where everything connects.

one of the easiest videos to follow. awesome job mate

Thanks for such a simple explanation! This thingy goes here and this other thingy goes there. I felt like I needed a degree in electrical engineering to watch any other video. Legend 👍

Thanks for that mate used your tips to install a Stedi nudge bar on my Ranger. I used a metal skewer and duct tape to get the wire through the rubber in the fire wall

Thank you! This was super helpful thanks to your easy explanation. 😬

Thanks mate that was worthwhile and easy to watch (and listen to!)

gotta love the no BS vids. love the shirt too bro, good vid. got my like and subscribe

KISS system of sharing knowledge - well done

great edit work mate, and thanks for the coat hanger tip ✅

Love your work mate.

Thanks mate will be my first time tomorrow, your video helps alot I think I can do it 👍

Great vid Damo 👌

Great video

Love the hot tips, good instructions can’t wait to see the light at night time

Awesome video mate very helpful.

Great info thanks

Another well explained video.

Thanks for doing the Video Demo it gave me confidence and I had no issues doing then plug and play wiring system on my Ranger. Thank you.

Love the video. Note: I have a Wildtrak so may be different so could be an idea to review the cars user manual. Negative loads in my case, MUST be earthed to the chassis not the battery. Has something to do with the BMS failing/under performing.

Thanks for the vid Damo!

excellent thanks for this...

love the shirt bro haha i've got one also, from memory i picked it up from Butterworth!

Very helpful mate 👍

Very well done sir, thank you

I have the same car. I usually carry a lot of wood so I’m unable to fit the light bar on the roof rack as it would be in the way. Do you think it would be possible to fit the light bar between the roof rack and the roof? Thanks for the video by the way very useful 👍

Nice one good work as well nice and tidy 😎

Legend for sharing 🤙

Got the same set up my led bar is not working with the switch it only works with the high beams is that how urs works or is there something wrong with my wiring harness

Good stuff mate

That was great thanks ! How is the Stedi light bar holding up a few years on ? There are so bloody many to choose from but like you, I like the idea of everything you need is in the box with this brand.

Any reason why the negative terminal had a red plastic and the positive had a black ?

Hey mate just wondering is there a chance u can mount that stedi light bar not the double like urs just single light slim bar under the rhino roof rack?

Where did the piggy-back adaptor/connector to suit the Raptor come from? Tks.

Cheers mate

Can you show how you feed it through the firewall?

What's the piggyback for? Is that because these com on with your high beams? If so, what's the switch for? I want to install one on my car, possibly on the roof if I get a basket, but I don't want it as part of the headlights. Plus my headlights don't have separate high and low bulbs.

I have a st3k for my wildtrak.. The only issue I had is connecting it to the highbeam. Since I don't want to drill a hole into the dust cover. I routed my led bad to the fog lights. Other than that the stedi light bar is absolutely best bang for your buck.

I’ve done my Ranger the same but when the engine is running the relay is constantly clicking. It’s fine with engine off. I’ve heard it’s PWM causing it. Is there a fix ?

How good's the word "gonooo" Aussie as, good vid Damo.

Could you please let me know what brand of Roof Rack you have and also Light Bar Band. I've noticed the shaded deflectors you have on the outside of the doors, are they a Ford Option. Thanks Great Videos.

Thanks mate. Easy and to the point. Good to see those safety thongs as well 👍

U rippaaa🤙🏽

Thanks mate, great vid. Can you use an existing switch that is used for another LED light or spotties to have them all turn on at once?

I have a Rhino rack exactly the same, did you drill your own holes into the corners of the rack? Theyre plastic on the corners I think?

min 8:14, where can I get one of those? I have a ford ranger And I want to put some led bars

Hi mate, some great videos bud 👍 I’m in the uk (spent a year in a straya a few years ago) I’ve just bought one of these bars to go on my ranger and will be fitting it this week, one question I have for connecting to main beam is that it’s a sealed unit and the connector is inside ( I swapped the halogens out already and put LEDs in) but there a plug outside is does that connect to the plug inside the sealed head? I assume I connect the piggyback to the plug on the outside? Hope that makes sense? Cheers

Hey mate, great video! What silicone do you recommend on using? Also, would the piggy back wiring that is included work for the PX3 wildtrak??

Hey mate How did you put the dust cover back on after hooking it up the hi beam? Cheers

When your connecting to your

Noticed when you turned the switch on and off to test the light bar, I imagine you had to have your high beam on as well? Cant tell in the video due to the sun, but i imagine this is how it works?

G’day Damo - you’re a better man than me mate, I used the same harness for a light bar set up on our daily runabout but did it a little different........I hooked everything up under the hood, turned the light bar switch on then secured the entire harness including the switch in the engine bay - has been like it for two years lmao. Maybe one day I’ll get round to running the wiring through the firewall. Awesome light bar👌. I’m pretty sure though where I am (cockroach country), it’s illegal for lightbars to be mounted on the roof due to it being a truck hazard (light hittin the truck before you see it). I read you received an email from Ford asking you to rate their service - that there Damo is your bargaining tool for your tub liner. Ring up the service manager and just say straight up - ‘how can I rate your service with an outstanding issue, if Ford have no plans of fixing the issue I’ll fill the survey out now’. A bad report regarding service is not good for the dealership. A service manager told me how it all worked and the last thing they’ll want is a bad report - use it to your advantage. I will say that personally I’ve found Ford to be fantastic over the years with customer service. Literally they’ve gone beyond the call for me at times and I think you’ll be right with the right attitude and the right ‘hint’ about the email. Given you’re a higher end customer they’ll wanna keep you happy, they’re not gunna let a tub liner spoil relations mate - I’d be very surprised if they don’t come to the party. I dug out our old VHS recorder tonight from the garage and watched our old Cape York trip from 2002, I can’t wait to get out amongst it again. Definitely lookin forward to your trip anyway mate.

Did you not disconnect the car battery before attaching the wiring harness black and red wires to the battery?

Watch out for the Roos, mate!

Hi again Damo. Your Raptor is definitely coming along nicely mate. Did you consider getting the rhino rack specific brackets from Stedi that tuck the light bar underneath? Did you think the light bar was advantageous sitting above the roof rack? No judging just interested as I will be doing the same thing very soon. I think the lightforce panel will be a great addition as I too have been struggling with switch locations. Thanks for another great video mate.

Hey mate, quick question, why does it have to connect to the headlights? it already gets power from the battery and then it should just be the switch to open and close the connection right?

Hey Damo im doing the same install where did you get the piggy back adaptor from ?

Hi mate, what brand silicone did you use? What do you recommend?

Hey mate, I just ordered myself a stedi light bar and it says piggy back adapted included. Why did you have to buy one seperate ???? Cheers

Question mate,can I wire this to the headlight?I mean the light bar ,mine is a 2020 model that has automatic high beam capability but I will use fascia as my main switch at the same time?thanks mate

Great vid! Thanks. Just a thought, I noticed that the plug at the top on the roof doesn’t appear to be properly insulated? Is there a risk of water getting in perhaps?

Hey mate how’s the rhino rack go noise wise? Cheers

Hey buddy! Why did you have to connect it to your high beam?

Will this work on a 90 Toyota pickup?

for the wiring on the windscreen how did u stable it?

Hey dude, nice video again. Bin a wile since the last update. How was the warranty claims going? Getting closer and closer to the big trip dude. Can't wait hehe. Hang loose brother 🤙🤙🇩🇪

So I have a question, maybe somebody can help me. I just installed a 50 inch curved light bar on my truck and now my doors won’t shut completely. Can anybody tell me where I might have gone wrong

Can I have it on my wildtrak?

At first i thought you reverse polarized it xD

G'day Damo another nice vid mate and seems to me you need to give your dealer a swift kick in the nads mate, to get their collective fingers out of their arseholes and get your warranty sorted, they're real quick at taking your money but not quick at doing the right thing by you!

Gee it would be good to see it go through the firewall...

They think theirs hung me on the bridged

Abs getting payed millons for it

Here’s a great explanation of installing a light bar kzfaq.info/get/bejne/Z9dkqr2i3tmUnGQ.html

Glad you said no mechanic/electrician- I am one of the worst as far as anything tech is concerned. The local auto electrician is having a bonanza- he is installed a couple of driving lights and not kidding kept the car all day and charged $200 each time.

How do u get bitchese out if your house that u lose power of attorney Rimmers

another great video mate well done im keen to see what bullbar your gunna fit have you seen these www.rhino4x4.com.au/78-ford-raptor

No video of the lights working.........missed opportunity.

Ight bar

I wsnt to love my money from anz bank to another bank

Stolen house

Do they work when you switch on your high beams, or do you have to switch it on with the mouse switch .. Awesome video legend