How to link two Network Switch with fiber cables

Рет қаралды 34,159

Жыл бұрын

We can use either the cat6 cable or fiber optical cable to link two network switch. One of the advantages of fiber optical cable is its fast speed. In this video, you will see how to link two network ports together to achieve 2G bandwidth between the switches. You even can connect more ports in parallel to achieve fast speed. While multiple links are aggregated, it has redundant connection. One of the ports goes down will not cause the disconnection of the network.
If you will need any assistance with your project, please feel free to contact us here: www.fastcabling.com/free-solu...
This is the items you saw in this video.
www.fastcabling.com/product-c...
Find us on social media：
@Fastcabling
Also, find FASTCABLING here:
------------------------------------
Facebook Page. / fastcabling
Twitter. / fastcabling
LinkedIn. / fastcabling

Пікірлер: 58

@NickyHarold Жыл бұрын

Simple and to the point. Great work.

@Fastcabling Жыл бұрын

Thanks for your comment! If you haven't yet subscribed, please follow our channel. More videos will be uploaded soooon!

@adamalkebsi Жыл бұрын

Good job, thank you , I am learning a lot from your videos

@Fastcabling Жыл бұрын

Good to hear it helps.

@maneeshparihar Жыл бұрын

Thanks you have explained well... especially the BiDi part of the SFP connection .. and link aggregation and failover.. thanks

@Fastcabling Жыл бұрын

Thanks for your comment! If you're interested, please subscribe to our channel!

@skyengeh 5 ай бұрын

Thank you, very clear and concise.

@Fastcabling 5 ай бұрын

Glad it was helpful!

@robloxvempor Жыл бұрын

Great demonstration 🎉

@Fastcabling Жыл бұрын

Thanks for your support. If you're interested, we also provide FREE solution design for our customers. Submit here: www.fastcabling.com/free-solution-design/. And make sure you've subscribed to our channel cuz more tutorials are coming!!

@elamaroon8316 9 ай бұрын

great class, thank you

@Fastcabling 9 ай бұрын

Thanks for your comment! If you're interested, please follow our channel!

@VladimirSaneeh Жыл бұрын

Thanks a lot for the video!

@Fastcabling Жыл бұрын

Thanks for your comment!

@jimcar53 5 ай бұрын

excellent video. Thanks for posting.

@Fastcabling 5 ай бұрын

Glad you enjoyed it!

@JaydenDCampbell 11 ай бұрын

Thanks, great video.

@Fastcabling 11 ай бұрын

Thanks for your comment! If you're interested, please follow our channel!

@boneymaunduslim3838 Жыл бұрын

Thanks for this

@Fastcabling Жыл бұрын

My pleasure!

@ManikSabina.28M Жыл бұрын

Nice explain Bro💝💝🥰 I'm From Bangladesh

@Fastcabling Жыл бұрын

Thanks and welcome

@Bbrown124 Жыл бұрын

nice video thanks

@Fastcabling Жыл бұрын

Thanks for your comment! If you haven't yet subscribed, please follow our channel. We have MORE videos coming soon!!

@davidsonbrevilus1553 Ай бұрын

Thanks

@Fastcabling Ай бұрын

My pleasure! If you're interested, please subscribe to our channel. More videos are coming soon.

@user-cq6tl1qg6m Жыл бұрын

god bless you

@Fastcabling 11 ай бұрын

Thanks!

@YascoTv Жыл бұрын

Good job

@Fastcabling Жыл бұрын

Thanks for your appreciation! If you're interested, please subscribe to our channel. More videos are coming soon!

@YascoTv Жыл бұрын

@@Fastcabling Done

@Fastcabling Жыл бұрын

Thanks :-)

@andylee9977 Жыл бұрын

great video I want to extend my router to another billing by fibre cable do you have video of that

@Fastcabling Жыл бұрын

This video might help. What you need is the media converter kit. Two Methods to Pull a Network Between Two Buildings kzfaq.info/get/bejne/a8qjnpiCsZyuoqs.html

@kman8600 10 ай бұрын

Hi ! I need to connect two switches that are 100m away from each other. The fiber cable is a 12 strand OM3. Should I match 2 colors for the strands , make the LC a connectors on each end and connect the SFP adapters in both ends ?

@Fastcabling 10 ай бұрын

It depends on the SFP transceivers you have. If it is the BiDi transceiver, you just need single strand. Otherwise, cross connect two strands on both ends.

@iftikharahmed171 5 ай бұрын

first of all thanks for this video, i need some help as i have to install 64 ip cameras thru 10 poe switches and two NVRs pls guide me how to connect (5)poe switches with on NVR thru fiber cable

@Fastcabling 5 ай бұрын

Thanks for your comment! Please submit your inquiry here: www.fastcabling.com/free-solution-design/. If possible, attach a sketch of the network layout.

@droppincaskets9785 6 ай бұрын

Not to make fun of this vivid or but all I heard was uncle Roger. 😂😂. Your video is awesome!! Thanks for the explanation!!

@Fastcabling 6 ай бұрын

😁

@sjnlim3925 9 ай бұрын

i have two manageable switch with sfp port.can i connect two switch using sfp with fibre cable and pass 4 vlan between them

@Fastcabling 9 ай бұрын

Yes, the VLAN is L2 protocol. You can set 4 different VLAN to divide the network into 4 sections. Just make sure you have set the SFP ports to trunk, but not access port.

@xxajayxx7930 8 ай бұрын

Hello can i use two multi-mode sfp to connect to two switch between them?

@Fastcabling 8 ай бұрын

Yes, it'll work. However, the distance between the switches will determine whether multi-mode fiber is the best choice for your setup. Multi-mode fiber is typically used for shorter distances, up to a few hundred meters, whereas single-mode fiber is designed for longer distances, up to several kilometers. If the distance between your switches is greater than a few hundred meters, you may want to consider using single-mode fiber instead. Also, be sure to check the specifications of your switches and SFPs to ensure that they are compatible with each other. Some switches may require specific types of SFPs, so it's important to verify compatibility before making your purchase.

@ahsanali-me9so Жыл бұрын

I have two different company switch how to configure switch to switch two fiber cable plz help.

@Fastcabling Жыл бұрын

If there is unmanaged switch, you don’t need to configure the switch. Physically link two switch will be fine. If it is the managed switch, you might need to set the subnet to put two switch in same subnet. Of cause, you also can configure the VLAN to divide the broadcast domain.

@ManikSabina.28M Жыл бұрын

Bro i need to solution, Repeater router to other router how to connect WiFi services though lan cable

@Fastcabling Жыл бұрын

There are several ways. The cable connection is most simple and reliable solution. If the distance is beyond 100 meters, you can use PoE extender or fiber optic cable. The wireless bridge or the mesh network could be the solution as well. It depends on the situation.

@dhanushr2080 7 ай бұрын

I am facing the same problem in my system there where 10 poe switches i connected all poe switch in series with use of LIU the loop will start from one switch and it ends with same switch it is like a ring network. When i connecting one end of the fiber optic cable in the sfp the camera getting online and when i connecting the another end of the cable then the video getting paused it was not showing anything in the monitor. Can you h ELP to resolve this problem

@Fastcabling 7 ай бұрын

It wll not work unless your switch support ERPS - ring topology. While you connect the last switch to the first one, it create broadcast storm, and the resource will be used up. The ERPS can detect the redundant link and set it standby. While the primary link is broken, it will switch the connection to backup link.

@story.algerien9646 7 ай бұрын

Haw i can conect 8 or 10 switch on serial whith fiber .tnx

@Fastcabling 7 ай бұрын

You might want to pick the switch which support ERPS. Daisy chain all these switches and connect the last one to the first one. Basically you can set two fiber optic cable. One for the daisy chain, and another one for link the first switch and the last switch. Just make sure the ERPS is on, otherwise, it will create broadcast storm, and the topology will not work.

@emmanuelmandela4724 7 ай бұрын

How to configure manageable switches plz

@Fastcabling 7 ай бұрын

You can either go through the console port which need to send the command to the switch or you can use the web browser built-in the switch to configure the switch. The manual will tell the default IP address of the web browser. You might need to set the IP address of your computer to match the subnet before you can access the web browser. Follow the manual to configure the switch since each producers could have different command set, but the general logic are pretty much the same.