How To Lower Your Dirt Bike - Kouba Lowering Links Install

No video

How To Lower Your Dirt Bike - Kouba Lowering Links Install

Рет қаралды 42,214

3 жыл бұрын

Need to touch the ground? Lowering links can move the seat of your dirt bike a few inches closer, giving you more confidence. They are easy to install, here's a guide!
Tom's Tinkering and Adventures would like to thank you for joining me in my adventures! Comment, Subscribe, and most of all, be inspired to live your own adventure when the time is right!
HELP SUPPORT THIS CHANNEL: I hope you enjoy the material that I offer, if you would like to support my channel there is a link below. Take note that it actually goes to my wife's account! She supports me in my adventures. Bless that woman!
DONATIONS: www.paypal.me/...
FOLLOW ME! If I'm on a motorcycle adventure, I take my Spot-X GPS tracker with me. It allows my family and friends to keep up on my progress and see where I'm at. The link below will be updated every time I get ready to go on a trip. share.findmesp...

Пікірлер: 94

@peterbrain2197 Жыл бұрын

Legend, thanks for taking the time to put that together!

@TomsTinkeringandAdventures Жыл бұрын

Thanks for watching!

@roh92cp 2 жыл бұрын

I knew it wasn't hard to do, but really to watch it being done. Thanks for your efforts.

@TomsTinkeringandAdventures 2 жыл бұрын

Sometimes it’s good to see it, helps build confidence. Let me know how it goes.

@roh92cp 2 жыл бұрын

@@TomsTinkeringandAdventures Thanks Tom, I will and I appreciate guys like you who make the effort to share knowledge and experience👍🏻

@TomsTinkeringandAdventures 2 жыл бұрын

@@roh92cp I just like to help when I can.

@clvrswine 3 ай бұрын

I just installed a Koubalink on my CRF300L Rally. Thanks for the helpful video.

@TomsTinkeringandAdventures 3 ай бұрын

Have fun riding!

@grandpa7278 2 жыл бұрын

Story time, finally I'm old and have money, bought 4 bikes from single large bike dealership. I should feel valued! Last season bought my daughter a new Kaw KLX 230 to learn on, payed $400 to have it lowered, "properly", picked it up went home. They lowered the rear via link, but left the front stock, headlights point up, and daughter's only put 130miles on the bike. Four bikes 3 new in 2yrs, and no respect!

@TomsTinkeringandAdventures 2 жыл бұрын

I feel ya, try to do something good for others and they don’t care. Just go ride, hopefully that makes you feel better! 😀

@EarthSurferUSA Жыл бұрын

It might not be an issue of respect, but an issue of "know how". Unless the dealership is a suspension specialist also, (and I doubt many are), they would not know how to do it "properly". Putting on a longer link was all they knew how to do. The bike is not riding properly that is for sure, like a chopper through the woods. I would fix it so she can learn how to ride it properly if she is into it because it probably steers like a school bus. :)

@markfishersolosailing7033 Жыл бұрын

I just lowered my T7 World raid with lowering links, I'm so pleased that I did it, it's really boosted my confidence at low speeds and at standstill, the handling and riding position is the same and the bike feels much lighter and more manageable. I lowered it 40mm on the links and 18mm on the forks, I left the pre load the same but will have the option now to wind it up a bit if I load it up with panniers. The bike now feels great. I'm 6.1" so not short but it's made a huge difference.

@TomsTinkeringandAdventures Жыл бұрын

Confidence is huge when riding, especially off road. Something like this can easily be reversed after a while, so it just makes sense to try it. Enjoy the bike.

@Sirskibumsalot 2 жыл бұрын

Just lowered my XR 400 with the same kobua link today ... I got 3/4" drop with it ,, not a 1 1/2" like they told me when I ordered it . Also dropped the front forks as you did .... I'm flat footed now on the bike Which is what I wanted . Thanks for the vid !!

@TomsTinkeringandAdventures 2 жыл бұрын

They are a good option to feel a bit more confident. Enjoy the ride!

@kevinalexandervalenzuela4098 2 жыл бұрын

How tall are you???

@Sirskibumsalot 2 жыл бұрын

@@kevinalexandervalenzuela4098 ....not sure if your talking to me or not ....but if so , I'm 5' 11" .....

@JustMe-yy7uc Жыл бұрын

Hi, After a year of experience are you happy with the suspension? I am about to lower my bike,but I need some advice before I do it. Thanks

@olivecole152 Жыл бұрын

This comment was super helpful as I have a 400 and im needing to look into this!

@wayfaringoverlander Жыл бұрын

Thanks for the info. Previous owner put a Kou a link in without adjusting front forks. Geometry was way off. Putting original link back in

@TomsTinkeringandAdventures Жыл бұрын

Yeah, if you’re tall enough or confident enough…not needed, but it’s nice for the people who want it.

@wayfaringoverlander Жыл бұрын

@@TomsTinkeringandAdventures I can see the purpose for one if you’re short, I am 5-6, so I’m already vertically challenged but the rear shock is so stinking rough with the lowering link in.

@TomsTinkeringandAdventures Жыл бұрын

@@wayfaringoverlander yeah, it does change the shock ratio. Best way to lower a bike is internally on the shock and forks. $$$

@prettymucheverything1033 8 ай бұрын

As a smaller guy, I need to do this to my 1990 kdx 200. I have to currently tippy toe side to side, which is fine for track racing but I mainly woods race/ride. Would to get more footing because it is a heavier bike than I’m used to. And I shouldn’t have to worry about clearance

@TomsTinkeringandAdventures 8 ай бұрын

Yeah, it’s great for that extra confidence in places. I’m sure there are links for that model, they are great bikes.

@leafcup3068 3 жыл бұрын

appreciate this bro, was literally about to look up how to do this

@TomsTinkeringandAdventures 3 жыл бұрын

I’ve done several of these, everyone is always happier when they can touch down their feet a bit easier!

@georgesweaton4623 2 жыл бұрын

Just bought lowering link for crf250 rally and found your video great help well done thank u uk

@TomsTinkeringandAdventures 2 жыл бұрын

Thanks, I hope your install goes smoothly.

@michaelrowland8994 2 жыл бұрын

Thanks for the video. I am doing just the opposite on a Crf250x. It had the Kouba link on it and I am putting the stock one back on it.

@TomsTinkeringandAdventures 2 жыл бұрын

Same directions apply, I have probably removed as many of these as I have installed! 😂

@EarthSurferUSA 2 жыл бұрын

I had to lower my YZ on both ends so a average sized guy can get on the damn thing, and I also use a little longer link. I went back to stock too, (just lowered the suspension instead and a lower seat.). I found out it shifts the travel. So if you stock bike bottomed out and the wheel barley hit the bottom of the fender, then use a link that lowers the bike 1" (for example), then to bottom the shock, the wheel would hit the fender trying to go 1 more inch. It will be like hitting the brake for a second while the fender and sub frame are taking a beating. Could cause a crash also. I will keep that par stock too.

@EarthSurferUSA Жыл бұрын

The issue I have with most lowering links is, as it lower the bike by let say 1", the wheel will still have 1 inch to bottom out the shock bumper and it bottoms out on the underside of your fender. That don't change the amount of travel much, but just shifts it into your fender if you bottom out. Properly working suspension should bottom out a bit on the biggest stuff you hit so you know you are using all your suspension travel.

@TomsTinkeringandAdventures Жыл бұрын

Yes, it’s not a perfect solution but if it helps someone to be more comfortable riding then the compromise is probably worth it.

@joewoodard2513 2 жыл бұрын

I've lowered several sport bikes and honestly it didn't negatively effect the steering as much as I thought it would. It did however take some of the wheelie out of a few lol.

@TomsTinkeringandAdventures 2 жыл бұрын

I’m not a good enough rider to notice it, but I always mention it when installing one.

@wazqii7191 2 жыл бұрын

You saying it’s harder to wheelie?

@joewoodard2513 2 жыл бұрын

@@wazqii7191 on the sport bikes I've installed the lowering links on... it would spin the tire easier rather than wheelie. I'm not sure on a duelsport. That's just my experience.

@EarthSurferUSA 2 жыл бұрын

@@joewoodard2513 It might have been snowing that day. :)

@geofferyrobertson6608 Жыл бұрын

good content mate

@TomsTinkeringandAdventures Жыл бұрын

Thank you!

@unladenswallow43 2 жыл бұрын

Thank you for this, very helpful!!

@TomsTinkeringandAdventures 2 жыл бұрын

I always like to hear that, thanks for watching.

@clkb8moto 10 ай бұрын

Thank you

@TomsTinkeringandAdventures 10 ай бұрын

Hopefully the video helped.

@clkb8moto 10 ай бұрын

@@TomsTinkeringandAdventures Most definitely did!

@Klx-Forman Жыл бұрын

Thanks so much

@TomsTinkeringandAdventures Жыл бұрын

Hopefully it was helpful.

@rosarioroberto5823 5 ай бұрын

Greetings Tom, As always another brilliant detailed video 🇺🇸🎉🍾🇺🇸 Do you have to adjust the chain after change the link? Thank you so much for assisting me, and keep producing more videos. Did affect the ground clearance?

@TomsTinkeringandAdventures 5 ай бұрын

Thank you. You may have to adjust the chain slightly, remember that the chain will get tighter/looser throughout the travel of the swing arm but if it was set correctly before installing the link it should be fine. Good luck and have fun riding.

@SoulSkis Жыл бұрын

First step should be shaving the seat. Sometimes that is all that is needed and its free other than time and new staples.

@TomsTinkeringandAdventures Жыл бұрын

That’s another great option. Most motorcycle seats have an inch or so to spare in the seat foam, and narrowing/rounding over the top can help a lot too.

@dfxdarrell6734 Жыл бұрын

I installed links on my DR-Z 400 and it made a world of difference! Much more confident now. I come from a motocross background and I was wondering how to set up the rear shock with these links installed? The "sag" setting has been taken out completely and I don't know where to set the spring preload for my light weight of only 130lbs. Thoughts anyone?

@TomsTinkeringandAdventures Жыл бұрын

Yeah, it’s a compromise with suspension settings. Lots of people run these, there has to be some information out there about setting up suspension.

@sampson7941 10 ай бұрын

Put some rolls of quarters in your pockets. Maybe that'll get your weight up

@allensnook7760 Жыл бұрын

Thanks buddy im 5'7" and i have no choice got a klr-650 off brother-in law its to tall for my short stature its a choice of lower it or trade in smaller.was wondering how to go about it now ive got clues!!snooky pa.

@TomsTinkeringandAdventures Жыл бұрын

Good machine there, have fun with it.

@allensnook7760 Жыл бұрын

Yeah it is nice,but its a heaping sow of a hog heavy n tall.i keep telling my buddies its like riding a pregnant woman all day the tank holds plenty of juice for long rides but when ur done riding you walk like a cowboy all bow-legged from straddling that tank.and god forbid u drop it over youll get hernia getting it back up!!!ive bought a suzuki dr 400 tank to swap for 300.00 but even that looks wide.i guess if your a fan of dually trucks you fit right in on it,no shortage of grunt it goes with purpose but im thinking the honda crf-300 may suit me better.just seems a pig to me but reliable fer certain to each his own,happy biking!!snooky pa.🤪👍🖐💥

@TomsTinkeringandAdventures Жыл бұрын

@@allensnook7760 yep, that’s the KLR! I’m will go pretty much anywhere but it might make you wish you didn’t. 😂

@geofferyrobertson6608 Жыл бұрын

put a piece of wood across the seat and measure to it ... easier

@TomsTinkeringandAdventures Жыл бұрын

That’s a good way to do it, thanks.

@rockman49er 5 ай бұрын

My bike was stink bugging so i didn't lower the front forks also i bought psr lowering links and i had to drill them out because they were to small 😮

@TomsTinkeringandAdventures 5 ай бұрын

I hate having to modify parts that are supposed to fit.

@gotdirt66 5 ай бұрын

So your saying whatever the link lowers the rear shock you need to slide up the fork tubes by an equal amount.

@TomsTinkeringandAdventures 5 ай бұрын

You can only slide the forks up a bit, but that’s enough to help keep the bike from getting that nose high chopper look.

@gotdirt66 5 ай бұрын

@@TomsTinkeringandAdventures I get that. I bought 1inch kouba lowering. I am going to raise the forks up by 1 inch to accommodate the rear drop

@TomsTinkeringandAdventures 5 ай бұрын

@@gotdirt66 that should be good. Enjoy the ride!

@sampson7941 10 ай бұрын

Pretty sure you're not supposed to push the forks up that high in the clamps

@TomsTinkeringandAdventures 10 ай бұрын

As long as the diameter in the clamps is the same you can push them up as far as you want. Just like the links change the shock rate, pushing the fork tubes up will change the way the front end handles so it’s something to be aware of. It’s not ideal, but if things like this gets someone out there riding, it’s a decent compromise.

@takumisato7126 3 ай бұрын

Looking at a 2024 Kawasaki KLX300SM, I'm about and inch from being able to flat foot it, if I do just a 1 inch lowering link besides maybe changing the kickstand is there anything else I need to change along with the 1 inch lowering link?

@TomsTinkeringandAdventures 3 ай бұрын

It’s a good idea to slide the forks up a bit to make the bike level, otherwise it will be raked out like a chopper.

@takumisato7126 3 ай бұрын

@@TomsTinkeringandAdventures that's true, I may try a lower seat from seat concepts first, it lowers the seat height by an inch and I'm not that far from flat footing the klx300sm I'm looking to buy, start there before messing with the suspension geometry

@TomsTinkeringandAdventures 3 ай бұрын

@@takumisato7126 SC makes good seats too, good option.

@Checkyoursix77 2 жыл бұрын

Can you still use the kickstand?

@TomsTinkeringandAdventures 2 жыл бұрын

For this bike it was ok. Sometimes it makes the bike stand up pretty straight so you have to be careful where you park.

@price3rc 2 ай бұрын

That link looks like 1/2" not 1 1/4"

@TomsTinkeringandAdventures 2 ай бұрын

It seems like these links never lower the bike the amount they say. I suppose if you have the preload cranked up to max, then install the link and remove all the preload it might be correct?

@trackman74 2 жыл бұрын

Any feedback on how the bike handled?

@TomsTinkeringandAdventures 2 жыл бұрын

He is happy with it, most people won’t notice much difference but it does effect the leverage on the rear shock.

@EarthSurferUSA 2 жыл бұрын

@@TomsTinkeringandAdventures It effects the balance of the frame geometry to do one end and not the other. If you just lower the rear end for example, it will turn more like a school bus. I just lowered my MX woods bike about .75" on each end and 1" off the seat. That great company "Race Tech" has a very good "suspension bible" that is full of great information, including lowering. It is getting harder to find really good information these days, but a person can start a business with that book.

@TomsTinkeringandAdventures 2 жыл бұрын

@@EarthSurferUSA correct. On this bike I lowered front and rear, this will change a few things on suspension geometry but many people don’t notice it and are just happy to have the confidence of being able to hold the bike up.

@EarthSurferUSA Жыл бұрын

@@TomsTinkeringandAdventures I can understand that. I rode for a couple decades and raced MX for 10 years and enjoyed making my bikes better. And as a perfectionist, it has to be just right or I would lose confidence in the machine and me on it. Maybe I paid too much attention to it, because I know guys who were faster than me, (and I was no slouch), who seemed to go fast on anything. :) If they are not looking for the ultimate physical set up,--then they don't need it I would say. I just would not want to set up anything that was dangerous or destructive to the bike for them. Doug in Michigan.

@TomsTinkeringandAdventures Жыл бұрын

@@EarthSurferUSA that’s the thing, we can set up stuff however we like it. The bike in this video wasn’t being ridden much because the owner was uncomfortable, now he’s riding the heck out of it. 😀