1st white takuache😂🔥

Nice ! Only thing I would of did different would be pressure washing the engine bay with over cleaner and degreaser .... lol I don’t want a guessing game trying to determine if my new motor is leaking or was that from the blown 6 cylinder

First channel i actually subscribed to after youtube college for 3 hours. Really appreciate the video.

"CUH" 😂😭

NIcely done you have a talent for sure. Love the keep it simple approach and getting the complete harness from the junkyard careful instead of the cut and slash you see so many do. Well done!

Ain't nothing like going to the junkyard and picking what you need, yourself. There is something peaceful about it, relaxing. Nice vid my guy. Crisp picture too!

Dude awesome video! Straight to the point with no BS. Good stuff.

Great job man. Not just anyone can swap an engine in a driveway after a rainstorm. lol

I'm just about to swap a LS into my 1978 Nova this weekend waiting for my Holley oil pan to come in .😁👍 keep up the good work

Thanks bro! Awesome video! Thanks for taking out the time for us

17:19 it’s a compression fitting. Good job broski 🤙🏾

I can't believe that the LS harness plugged right into the V6 harness. That is one of the things I was dreading on my swap.

Really good job bud I try to do mine too. Good luck man 👍

Great video! Definitely inspiration for the 4.8 swap I'm wanting to do in my square body S10, good to know it can be done even cheaper than I was expecting.

Good jobs you did pretty good can’t wait to get mine in around this week my cousin is doing it for me wish me luck everyone hopefully that junk yard motor runs healthy 🙏✌️😁

Great video bro, just started doing my swap today and this video is gonna help a lot! 👏🏽👍🏼

Not bad, i like how easy things were maid and explained

Thanks so much cuh now I can swap my v6 out cuh and race on cruise nights cuh

Love your channel keep it up brother

Hey man love the channel and the dope content your putting out. What are the best bolt on performance mods for a stock 5.3? I have an 04 Tahoe that I want to get some more giddy up. My current mods are 1) Stickers=50hp 2) Porter stock truck manifold and Tb by Chuy454 3) Corvette Servo 4) mail in tune from Blackbear performance. So what do you recommend to add some more Power? Would a ported nnbs or TB intake be better than what I got?

Good work🔥🔥🔥 new subscriber 🤙🏽

nice video man did you have to rebuild the engine or was it just a straight swap?

I have a 95 c1500 with a 305 that I'm thinking will like a 5.3 and a 4l80. The 5.3 is one hell of a motor man.

I swapped my 4.8l with a 5.3l and rebuilt the 4l60e in my 2003 1500. Now I’m doing bushings and steering box 😂 never ends!

No quema, What did you do to the exhaust cuz that sounds hella nice

Awesome video dude 👍🏿

What an inspiring video man

Keep up the good work

Hope that compression fitting holds up on that fuel rail, there aint a whole lot there to hold onto. Id just done a quick connect 6an fitting and ran a short 6an hose. Other than that looks pretty good

Good fucking work my dude.. u got me thinking i might just try to do mine.

Sick work

I can't help but notice that you are not worried about anything falling in the ports lol 👍

Chingon bro good job 👏👍

Thanks for the video bro I'm currently doing the same swap but on a stepside. And I ran into ur video

If y'all need work done to your trucks in the DFW area or you wanna bring your truck to me from wherever you're from, even ship me your vehicle, message my instagram @jackstandbuilds. I do great work for great pricing! Cam swaps, engine swaps, headers, trans swaps, etc. HMU!

Good stuff. Thanks!

🤩 awesome!!! GENIUS!!!

is that common for the neutral safety switch to have glue from the factory? I have the same situation with a 4l80e... thought i had to get a new pigtail

Thank u my dude

Love the video and what you are doing but you should have cleaned up the old grimy parts a little !!!

What type of fitting did u use for the fuel lines, was it just one that u used or more?

Nice truck cuh

Buen vídeo amigo, una pregunta bro, como cuanto cuesta comprar un buen motor V8 y cuanto cuesta por cambiarlo a una Chevy 2008

Get 2 hoods take one of the hoods and section it could you do make the bumper the center taller or at a second bump in the center of the hood section tighter together It's an old hot rodders trick This will give you a customer Hood that nobody else has

Quick question I'm installing a 6.0 and 4L80 transmission Do you think it will be OK to Install transmission and motor at 1 time like you did in this video ?

Great vid bro I like how you didn't pressure wash the engine bay or paint it just strictly turning wrenches getting down in the yard 💪🏿💪🏿👍🏾👍🏾😂

Hey Jack plz do another video in more dethp about the fuse box and wiring

How was it under a thousand? Where did you get the parts and what all would you have to get ?

The V8 wiring harness will plug straight into the fuse. You will need new style fuel lines

Did I miss something in the video? I thought you had to match the frame rail mounts with the style suspension in the swapped truck , can I use the frame mounts from the torsion bar 2wd suburban on my 2wd non torsion bar Silverado ?

Wonder if just taking the front end off would make it easier? Like the grill, radiator, fans, and cross bar deal? You could probably just pull motor and tran at the same time and be able to clean it all if ya wanted, and onbthe headers maybe take plastic out of wheel well an take tire off like you do changing spark plugs? . Idk though?

Yes I Like You video I have a 1990 Chevy pickup truck 4.3 with a smog pump already going to fix that my friend have a V8 with transmission on a Suburban is that going to work for my truck

Gah damn you made that shit look easy

I'm doing this rn and my red & blue harness has triangle o2 sensor plugs. Did I get a 6.0l harness or something?

what you do so it can pass emissions ? or smog what ever you have where you live

Awesome video 👍, hey what camera you used to film?

How much would it cost to put a 4l80e in it Bc every vid I have saw they explain it to be really expensive

Did the trans harnesss come out with the main engine harness?

nice!! video keep it up! where you from brotha😅

Did you have to do anything to the driveshaft?

What kind of spark plug wires did you use bro?

What are those fuel line fittings called?

Would this be the same procedure for a 2010 v6?

Did you have any problems when you tried to do vats delete? We couldn’t get the file to load for some reason.

Hey after you have the new motor installed, you talk about needing somebody with a computer to come delete the fats or cats, not sure what that means. You said you need them deleted before you can drive it. What does that mean

Very very Good 👍😊 God Bless Drive safe.

Your video make me want do a swap

Also.lol ,what about drive shaft length. Still works since engine mounts shift things around? Or depends? Thanks again buddy.

I want to LS swap a 14-18... LT and 6L80 is garbage I want pre afm drivetrain.. basically putting a 99 to '06 drivetrain in a 14 to 18 would be great. even a LS3.... Even if the l86 makes more torque and similar power the LS is far superior reliability wise

does the c2 block from the engine wiring harness just plug in to the stock fuse block without any depinning or anything like that? im trying to do my lq4 swap but some wires are either missing or in a different place. thanks

What hardness did you use 01-02 or newer?

I pulled my 4.3 out and dropped 5.3 in and bolted. It all up and the motor is sittting at an angle any ideas

So you dont need a fuel regulator or anything like that?

Is that a cowboy hat on your front tire....saweeet

thats the Mamalona right there

I wish GM would’ve made a standard cab, standard bed base model Silverdildo with a 6.0 and 4L80 or T56 Super Magnum and heavy duty diff, It would save alot of time and hassle for alot of people

Is there any problem with smog after a swap?

Where did you get you’re egr block off plate at.

Don’t need to delete vats, bcm relearn procedure 👌🏼

You have to change transmission?

Was the transmission you used was from another V6?

Doing a swap on my 02 Silverado, anyone know if a can just use the 5.3 flex plate with the v6 torque converter and transmission? Some people say that I need some sort of spacer but I’m not sure

Is there a link for those red racing wires?

Is good video because I make v8 for me Silverado 2001 too

Would it be the same to ls swap an obs Silverado

What all do u need to do 5 4.3 to 5.3 swap what Ik is u need engine mounts harness I think ecumk if I do or not n lmk abt anything else

So for a engine swap on a chevy, does cluster mark different? like the fuel gauges or the rpm or mph?

how long did it take you, Just work time?

And i have a 2005, 4.3, 2wd 2dr im looking on swapping. What 5.3 should i he scouting in the junkyard ? Truck and year wise? Also, will it need the VATS? my truck now has nothing. Completely base model . And i have a blackbear tuned pcm from another 2004 Sierra. Could i use that too?

what year truck did u get the frame mounts ???

The harness didnt match the engine? Is that why the injector plugs were different?

Where you located at brotha, thx for the info

The albino tacuache 😂

Didn’t need the flex plate adapter?

Where do you take your cpu to get flashed

What brand headers are those?

I tell you man, these shops really be getting over on people as far as labor goes trying to charge like $4k for labor.I hope This Covid19 really humbled them up and come back to reality

what did you need to do the swap?

Did u use the same fuse box??

What size 6an fittings do you use for fuel?