Thanks! Simple, straightforward instructions with no long-winded extra chatter.

bro im so dumb the instructions were so unclear so i just poured the lubricant on top of the belt LMAO SO NOW ITS JUST STAINED and then i watched this vid

Thank you, you're a life saver :) The instruction in my treadmill's manual is garbage.

Thank you! I watched a couple of how-to videos on this topic, yours was the best.

This is so helpful and clear. Thank you! 🙏🏼

Thanks for the video... helpful to understand this important part of lubricating the treadmill belt.

Thank you very much - the instructions that came with my treadmill were nowhere near this clear!

Thank you! Great video! Treadmill glides so much better now!

Thanks for this video. This is simple yet effective. 👍

Thank you for the useful video, buddy! Keep up the great work! 😊

This video was a lot of help!! Thank you!!!! Just show lube belt in my walking machine

Wow! Very clear and simple!

Thank you for this! Saved me from trashing mine

Great job on the video and a reminder that I need to lubricate my belt lol Thanks!

Thanks for posting. It worked well!

Appreciate you made this video . THANKS

Thank you! This helped me with a home purchase. ❤

Much appreciated advice in video.

Thanks for getting to the point! Great video!!!

Cheers mate, fixed my brothers brand new 600$aud OVICX A2s using this guide, (Edit: my OTHER brother lubed it up but the belt was grinding on one side which has made it slightly frayed). Wasnt sure if it was compatible. Now I can shed some kilos!! Not to mention the nephews can run and push it to its limits and destroy it faster than I can try to fix it haha

This was well done!!!!

Great: Very informative and short Video. Thank you.

Great video!

Thank you . Very helpful

Great information 👍🏼🙏🏼

Thank you for this ❤

Very beautiful video 👏👏👏👏👏👏👏👏👍

I have a question. How did you become so cool with that creative bottle in air transition lol. In all honesty, it was wholesome but a great edit altogether. Thanks for the video

What should I use as a lubricant?

Very helpful thanx.

Thank you so much!

Thank you!

Nice workd and Nice products.

Video starts @ 1:00

Thumbs up for the lube toss cut scene....!!!

Thanks a lot!

thank you!

Super helpful, thank you!

Thank you so much❤❤❤❤

Thank you ❤️

good job

Omg Tysm!!!! 🙏 saved me from thinking I need to buy a new treadmill!!!!!

You made it look easy. I hope I do it right. Not sure I understand what you feel when you put your hand under the belt. Is it just the belt?

Thank you sir!

Concerning the treadmills that don't have easy belt access, to keep you from having to loosen, tighten and re-align the belt (what a pain) , simply stand the machine on end and apply belt lube to the under side of the belt. May take two people.

Thank you sir 👍👍👍👍

Saving lives here 👏

Very good products, and else to use

Warning: direct heat will cause the lubricant to dry up very fast. Don't place the unit by a window with direct sunlight or near a heating element at home - including when the unit is in the folded position.

good video

Getting a used precor tomorrow, going to clean and oil it before testing it to be certain we dont cause an issue

Thanks!

How do you know if your treadmill needs oil, either by its behavior or by feeling under the belt? I assume it should feel like there's only a thin film of oil on the platform.

Thanks dude

Thank you

Useful.

thanks buddy :)

Take care of it, and it lasts a long long time. I have a SCHWINN 6700.1 treadmill that I purchased on April 2, 1999. To lube it, all I have done is take a big white candle and scrape off small bits of wax with a cheese grater, and then I evenly distribute the bits of wax under the belt. Works like a charm. Other than that, I have replaced the motor belt, once. There was a nasty scratch on the front plastic cover that covers the motor area, so I sanded it down, but now the sanded area looked grey instead of dark black. So I applied the same candle wax to the area and heated it up with a hair drier to make the wax easily distributed, and boom, after polishing you couldn't tell where the scratch was anymore.

Nicely done.What could b d reason when d motor gets to ho

Thank you for the info:now how many time must we do this action 😎❓

Thank you for this video. How much oil should we apply?

That's a very helpful demo on lubricating treadmill. I have a home treadmill, a (cheap) Xterra TRX1000, bought it in November 2020 but started using in full swing only February of this year. After using it for 2 - 3 consecutive days, a message - "lube" showed on the dashboard so I used the oil that goes with it the way (but not exactly) you demonstrated and the message was gone. The manual said repeat lubricating the belt every 40 hours or so of use. Last week same message showed again on the dashboard; I applied the remaining oil but the message stayed. So I ordered Treadmill Lube Oil from Amazon and applied a little bit more - after I cleaned the belt, based on the manual - inserts a towel under the belt and run for a few seconds. But the 'Lube" message does not go away. Anything I should do more - other than buying a new one? Ed Rivera

My treadmill is hard to access from the top so I just go in on the bottom. I prop it up up in the rear and apply the oil on that side of the belt where there is easy access. I do it near the front as shown in the video. It all goes on the underside of the belt so it simply comes, oil ans all, around when I start it. Then walk of it as shown.

Hi sir I have a question when I do some exercise and stop the machine and come back later to start it it doesn't start until I unplug it and plug it back again ( BH model ) Why is that

Thanks

Thank you for this v clear video. I got my old treadmill 2nd hand frm o friend. Have used for about 3 to 4 years not knowing I had to do this as no manual was given. It now suddenly stops. After I mistakenly sprayed with WD40 found out on google search I had to lubricate with a silicon lubricant and not WD40. I bought one online but instead of stopping suddenly at 20 mins it now stops after 1 min. I live in Malaysia where there does not seem to be much help. Please please tell me what I can do

What do I do for a squeaking treadmill? The equipment is brand new and the belt has been lubricated. There's also a rubbing sound from the belt.

Can’t come out tonight, why? O I’m lubing up my treadmill loool

Thanks for the video... good job mate. The manufacturers of the Everfit treadmill I just buy, supply 2 small bottle of oil to which they say to tip "some oil" in a filling well on each side of the uplifted belt section. Problem is, a little like yourself, they dont say "how much" oil you should use. Should I tip out the whole bottle to both sides?

"Hey everybody. And today-" 😂 but thanks for the into!

What lubricant did you use on the first treadmill

Hi I just got a new maxkare folding treadmill and the first time I turned it on it sounds like the motor is rubbing something I looked at it but I don't see anything rubbing I've looked online and it seems like it might be the bearings is there anyway to be sure this is the issue ?

My treadmill came with silicone oil lubricant. However the lid POPPED OFF when I was lubricating and now I must clean up extra oil. Any recommendations? I am currently trying, on advice from googling, laundry detergent w warm water & Isopropyl Alcohol (91%)

The first six seconds feel like a Vine. 😹

what about cleaning dust under the belt before you put oil?

Where could I buy lubricant from???

some videos say loosening the tensioner while running it at the speed of 4...Do we really need to do that? And my tensioner is too tight, is it normal ?

Can i use non-detergent lubricant oil instead of the silicone oil?

at the bottom, the carpet is well centered, but at the top it runs to the left, what could be the problem?

How much should I apply after replacing the belt?

if I lubricated with oil 3 months ago and did not use tape, do I have to lubricate again?

Hy! Can you please tell me how can I change that thing that lifts the treadmill,please? Thank you!!

Thank you! After the lubrican is properly applied and the running belt has run for a few minutes... should I feel it oily if I stick my hand inside?

I just bought this treadmill and the belt is not moving. Do I need to lubricate it first before starting the machine ?

If my treadmill is randomly stopping should i try this fix?

Do you put the oil on the belt on the Machine it self?

I'm interested in the recumbent bike in the video. Could you give the brand name and model and any other info so I can find it?

How to fill the silicone oil for an auto lubricant machine?

Just bought a Proform treadmill today and the manual don't state anything about oil ,so giving them a call tomorrow the last treadmill i had was cheaper and came with oil

Mine is a Everfit Treadmill ? thank you.

What kind of lubricant? Can you us the spray lubricant?

Thank you! This helps but You didn’t mention how much oil to use?🤷‍♀️

Shops locked down here in Ireland but we do have KY Jelly. Could this be used (even temporarily)? It is a water based lubricant - could this damage the treadmill?

*can i use engine oil for the lubrication? Automobile oil is very very good for use of lubrication*

What if you mistaken to put the oil at the wrong place. How can one clean it off?

Can you recommend a good treadmill for big people 400 plus?

How often should it be done

Thank you verrrrry much. The owners manual tell us to lubricate according to its use: Monthly, Quarterly, Every Six Months. It supplies a plastic squirt bottle with a nose piece and a cap, but it DOESN'T tell what kind of oil it is. The owner's manual, is a JOKE !!!

which type of oil is the best?

Is silicone spray okay to use?