How To Lubricate (Lube) & Setup a Rubik's Cube!

Рет қаралды 2,216,969

5 жыл бұрын

A full guide to speedcube maintenance and setup!
Speed Lube Weight 5: bit.ly/2sVyXuw
Speed Lube Weight 6: bit.ly/2ME6VwE
Cubes ► • My Main Speedcubes [2019]
SpeedCubeShop ► bit.ly/2nW3qWg
Using the code "JPERM" supports my channel and also gives you a discount on your order.
Beginner:
2x2 Tutorial ► • Learn How to Solve a 2...
3x3 Tutorial ► • Learn How to Solve a R...
4x4 Tutorial ► • Learn How to Solve a 4...
5x5 Tutorial ► • Learn How to Solve a 5...
Special Tutorials:
3x3 One Handed ► • Rubik's Cube: How To S...
3x3 Blindfolded ► • (v.2) How to Solve the...
Advanced Tutorials:
2x2 ► • How to Get Fast at 2x2
3x3 ► • Beginner + CFOP Method
4x4 ► • How to Get Fast at 4x4
5x5+ ► • How to Get Fast at 5x5...
Facebook ► / jpermcubing
F2L Algs ► bit.ly/bestf2l
Patreon ► / jperm
Merch ► teespring.com/stores/jperm
Special thanks to these generous Patrons:
Soyale, Jack Gore, Gregory Martin, Kemen Freeman, Michael Mendoza, Ed Connell, Julian Lohuis, Pete Ryland, Jan Strohbeck, KingIceCream, Matt Hart, JλyClip, Joseph Elizalde, Paul Thorley, Sacha Lewin, Amay Saxena, Aaron Crouch, Weisselberger Timothee, Philippe Schwartz, Tylor Waters, Ludvig Lagerstedt, Jonas Rongé, Pontus Uggla, Peter Preston, Neini, Michael Shu, Takeshi Yanagita, Jane Qiao, Adam Prato, David Yang, Ricky Robber, Aaron Spiller, The Slick Cuber, Austin Shaw, Ronan Hanley, Eric Colon, Adam Rosales, Austin Brunell, Edan Maor, Grace Ganzel, Martijn Schiedon, snackers1234, Matthias Gärtner, David Brown, Nicholas Johnson, Taco, Mike Sampson, Siege Wolfe, Mark Fisher, Carl Dworzack, Rob Peters, Miranda Manning

Пікірлер: 2 000

@JPerm 5 жыл бұрын

Weight 5 is back in stock! bit.ly/2sVyXuw Remember that especially for big cubes you should focus on the inner contact points and less on the parts near the outside.

@sangeetakamat4638 5 жыл бұрын

👍😍😍

@anjalimobilehtc 5 жыл бұрын

What's the use of lighter lubes like weight 1.

@sangeetakamat4638 5 жыл бұрын

@@anjalimobilehtc it is used to lube 1x1!.. lol just joking...😂 The heavier lube is better for the core (Weight 5,4,3) and the lighter lube is better for the pieces (Weight 3,2,1).. hope you understood!

@chongpeiheng4030 5 жыл бұрын

if i live in Malaysia then the mspeed cube shop didn't sell the lube what should i use?

@chongpeiheng4030 5 жыл бұрын

no speed lube

@sangeetakamat4638 5 жыл бұрын

Man! I did everything what you said!! I lubed my 1x1 and all the lube is over my hand!

@matija01 5 жыл бұрын

Without that emoji,joke is good

@CpCubeR 5 жыл бұрын

That's why I lube the inside

@Unigardy 5 жыл бұрын

@@matija01 lol he edited the comment

@sangeetakamat4638 5 жыл бұрын

@@CpCubeR haha!!

@rubikscube178 5 жыл бұрын

Core lube

@beeninja2539 4 жыл бұрын

“Perfect 45 degree corner cutting” *Cries in Rubik’s brand cube*

@nutmeggaming11261 4 жыл бұрын

First off: KNOW ITS A JOKE! Here we go: I got a 8 buck cube off Amazon for 8 bucks and can corner cut about 45 with some tensioning, and could be an ok main with some controlius

@NUCLEAHxHEISENBERG 3 жыл бұрын

*Laughs in gan 356 x*

@1zlyy 3 жыл бұрын

@@nutmeggaming11261 you predicted the future mate. but im still curious: what cube did u buy? i wont be suprised if its the meilong though

@the-er1cd 3 жыл бұрын

just get an rs3m 2020 for $10 from scs

@dehlitegie 2 жыл бұрын

laughs in yj mgc3 elite cries in beginner who barely knows how to solve

@pee9070 5 жыл бұрын

Wait, you have to clean the cube before lubricating it? That explains everything...

@twistiicuber1055 5 жыл бұрын

@mrwhiskerstye2nd959 5 жыл бұрын

I love your account pic its soooooo funnyXD

@pee9070 5 жыл бұрын

Thanks

@anshumanagrawal346 4 жыл бұрын

I don't get it, can someone explain

@funcuberdeadchannel5426 4 жыл бұрын

@@anshumanagrawal346 He lubed it,and then clean the puzzle.But when he cleaned the cube there was lube in there,so he wiped off all the lube.So he wasted lube.

@JeeJee 4 жыл бұрын

2:24 I don't know if you noticed but there's a voice change.

@what-vr5gh 4 жыл бұрын

So I'm not the only one that noticed

@HardPasta 4 жыл бұрын

Yeah I’m so confused

@TheXCuber1 3 жыл бұрын

I did

@bobbystarks7946 3 жыл бұрын

He jacked his mic

@Danny15 3 жыл бұрын

I noticed it too.

@sylun 4 жыл бұрын

"Now look what you've done to the cube. That's disgusting." My cube: Amateur.

@lasercatto 4 жыл бұрын

He should see my cube.

@akashwalavalkar7313 3 жыл бұрын

same

@sylonisharma4660 2 жыл бұрын

Lol my cube is dirty it’s like it has salt in it.

@andrerosaesilva 5 жыл бұрын

This is by far the best cube channel on KZfaq. Gratz for the excelent content, thank you so much and, please, keep them coming!

@phsycobunny Жыл бұрын

Second place goes to cube head, but yeah, I agree

@TiltedTillerThePillar56 3 ай бұрын

z3cubing is underrated

@wasteland3447 5 жыл бұрын

1:03 why don't you just re-assemble it solved?

@scylk 5 жыл бұрын

Because on bigger cubes you have a lot of pieces so it takes much more time

@cobcorn8749 4 жыл бұрын

@@Nobody-he6pc I get what you mean, but all the centre pieces of a colour are the same piece, same goes for edges. So you only need to think about where a piece goes relative to where different pieces of the same colour are

@brittnilasater4155 4 жыл бұрын

I was thinking that two.

@timecat1174 4 жыл бұрын

@@cobcorn8749 wtf, center pieces and edges are not the same, only if you are assembling a 4x4, but in a 5x5+ they are different lol

@enavoid6285 4 жыл бұрын

You can separate the pieces when disassembling

@martysh1226 4 жыл бұрын

1:10 I like how you secretly put a 1x1 in the list.

@W3sson 5 жыл бұрын

I like when you get a PLL skip you’re like “what the hell” 😂😂

@cubeworld4302 5 жыл бұрын

Me: walks in room, ''I forgot that i needed my toothbrush". Jperm: And just to be clear *don't* brush your teeth with this. Me: Wait, isn't that mine? Jperm: Bye gotta go to nats

@cameron6683 5 жыл бұрын

lol

@ashutoshsaxena1134 5 жыл бұрын

why few likes in such a great comment??

@SupernovaC 4 жыл бұрын

119 likes

@thatguywithtacos1588 4 жыл бұрын

Supernova Cuber look when he commented the idiot

@spacemango3277 4 жыл бұрын

Cube World first I thought I commented this and was freaked out

@SpyralSMO 5 жыл бұрын

1:13 - why would you ever need to assemble a 1x1

@finndahuman57 5 жыл бұрын

Its so damn difficult you likely take it apart and reassemble it

@friendlyneighborhoodsoviet4512 5 жыл бұрын

You can magnetize it

@mitakandoria3875 4 жыл бұрын

@Spyral r/whooosh

@AvoDoesStuff_ 4 жыл бұрын

You are supposed to do that.

@SteelyLockss 4 жыл бұрын

Because its so stiff that we need tutorials to lube it

@corneliusdennies6448 4 жыл бұрын

0:32 "don't brush your teeth with this" LOL this made my day

@arjunsworld007 5 жыл бұрын

Legend says that if you are early J Perm will heart!!

@fathimanajiya4825 5 жыл бұрын

You r not a legend

@peanut134peanut8 5 жыл бұрын

I was first tho

@fathimanajiya4825 5 жыл бұрын

Why do u guys even like this ?

@karlhungus1368 5 жыл бұрын

cuz it's like Yoda said hello to you

@rohitas2050 5 жыл бұрын

@@fathimanajiya4825 um what

@MicahMorrison6 5 жыл бұрын

I use baby wipes to clean out my cubes💪

@shxden1760 5 жыл бұрын

you should treat your cube like its your baby

@uwu9272 5 жыл бұрын

@@shxden1760 I dont want my baby to be all fragile i clean my cubes with toilet paper

@wrth 5 жыл бұрын

TheUnstopableBob // T-TUBE I don't know why that makes me laugh

@uwu9272 5 жыл бұрын

@@wrth because it's funny

@nathonthefazegamer2030 5 жыл бұрын

Same

@thatguywithtacos1588 4 жыл бұрын

2:20 that voice change made him sound like a different person

@chewyicecube5373 3 жыл бұрын

I tried doing this to my 0x0 and I'm having trouble with the lube. It just goes all over the floor

@pog16384 2 жыл бұрын

haha

@lilyyy411 5 жыл бұрын

I use weight 2 (Cubicle) or 30k on the core. On the pieces, I use weight 2 or 30k and lubicle silk + dnm/Compound V/Compound X depending on the cube. Once I break in the cube for a long while, I put lubicle 1 in. Edit: and this is how I main the Yuxin Kylin V2, Kirin 4x4, Cloud 5x5, and Little magic 6x6.

@missachin5054 Жыл бұрын

Was wondering, I’ve had the gan x and xs for a while, the little hexagonal tracks on the pieces on the x are getting filled with what looks like dirt, I assume it’s the residual melted plastic from all the friction inside the cube given that I don’t lube the cube. Therefore I’m gonna start lubing it more but I was wondering if there are any lubes best for the gan x ?

@WandWizardThor Жыл бұрын

@@missachin5054 Try using weight one from Speedcubeshop! It'll add control, but keep it fast.

@stracodm3705 8 ай бұрын

I am using weight 5 for the core and lubicle black for the pieces with a bit of Dignitas, and Weight 1

@ninjacuberdk1466 5 жыл бұрын

Thank you! We definitely need more cube lubing videos out there.

@quantumnoctemus 4 ай бұрын

Truley spoken like a person with no life.

@starnathanstar 4 ай бұрын

@@quantumnoctemustbf you're watching this video too lmao

@MrCinnamonWhale 4 ай бұрын

I'm very new to cubing and this channel has been so helpful and fun to watch. I love all the small and almost hidden jokes you put in, like when you're talking about lubing odd numbered cubes and have 1x1 listed with them. It's hardly even a joke but I just enjoy them so much

@Brooklyn-vn8jt 2 жыл бұрын

J perm: “Any odd number” Screen: (1x1) Me: wait a second

@ultimatesheep 2 жыл бұрын

You know the rule

@tanveechakrabarty3359 2 жыл бұрын

@@ultimatesheep and so do i

@enzodougherty9429 5 жыл бұрын

Thank you so much for making this video! I have always just had to guess how to do this, and now I know from a pro.

@NoahS4226 5 жыл бұрын

I did a full setup on my MGC Megaminx the other day and let me tell you... Setting up a Megaminx is relaxing af

@osemekeugbo999 3 жыл бұрын

Awesome stuff J. I’m cleaning and lubing up my YuLong V2M for the first time.

@yasazaheen7887 5 жыл бұрын

For people who use Gancubes, lube the GES with a heavy lube. It's completely optional but lubing the GES reduces the spring noise and results in a much lower pitched sound.

@zoggn7731 5 жыл бұрын

we need more walkthrough solves from these speaking hands

@rpcubing5195 3 жыл бұрын

Iny gan X I put vortex in the core, a half cc of controlius for the tracks and two drops of solar on the pieces. Performance is phenomenal 👌.

@Blueshift._. 2 жыл бұрын

I love your Channel and you’ve made me decide which new cube I should get

@kermitinc8355 2 жыл бұрын

This helped so much. Thank you jperm!

@pedrosantos1480 5 жыл бұрын

No way! I was thinking in lubricate my cube for the first time, and you made a video about it!

@cameron6683 5 жыл бұрын

Hi! I've been waiting all day. pls release another video

@IDGs_space 4 жыл бұрын

i think he did

@imateckid 3 жыл бұрын

I just lubed my QiYi concave DNA for the first time yesterday after having it for months with no lube, and OMG it made a huge difference. I love how smooth the cube turns now, it's so quiet and much faster now. I tried lubing it a different way though, I put four drops in per side, one drop straight down each corner of the center pieces, and that's only because I'm not used to lubed cubes yet. Love your videos man, keep it up. 😁

@kaz8297 3 жыл бұрын

U should get an rs3m or meilong m or anything better then the dna cubes trust me.

@hasinahmedifaz118 5 жыл бұрын

Subscribed! My favorite KZfaqr/Cuber

@elilangley9169 3 жыл бұрын

Instructions unclear, my dog is now all slimy and my cube is in the sewer.

@Petesails 2 жыл бұрын

Note to myself and anyone else who needs it: when he says focus on the internal areas when lubing he is not joking if you lube the outer parts of the pieces it leaks everywhere any you end up making a mess.

@Wurd007 4 жыл бұрын

I did everything you said and now my cube feels like new. Thanks

@nathankingscote7763 2 жыл бұрын

I just wanted to thank you for what you did because this has really really helped my gts3 feel like it is new

@patchcabletube 4 жыл бұрын

Love your videos buddy. One thing i wanted to mention here is it might be worth adding a notation surrounding the screw adjustment step. The video shows the white being adjusted but when checking, by spreading the opposite layers apart, you are in fact adjusting one or both of those sides (orange/red)... Repeating for all layers, then continuing to test, leading onto the corner cut test in your video using the white face.

@patchcabletube 4 жыл бұрын

thinking back, not sure i was clear so...I'm thinking it'd be easier to turn the checking face (white in this case) to the side, lets say to the left (right handed) so white face is pointing left then check that white faces gap in comparison to it's four sides in-turn (orange/green/red/blue) by ONLY separating the center piece of one of those sides (right thumb) and the side piece of the checking face (left thumb), 1 gap to view not two. A consistent, over-sized, spaced gap all round indicates an adjustment can be made to the white face, tightening the screw. An In-consistent gap indicates that you will need to repeat this process for the side face (which becomes your checking face) with the largest gap space, most likely being the side which is too loose.

@nexion2406 5 жыл бұрын

I love the new kind of videos you have been making

@nerdydotdom7949 2 жыл бұрын

Me just now getting my new 5x5 and needed to know how to take care of it so thanks!!

@akssumusic 5 жыл бұрын

Of course you upload this right after I fail to properly lube my gts3m

@thetallestcuber2609 5 жыл бұрын

I use Microfiber cloths when wiping down my cubes. I also prefer super smooth feeling turning, but it needs to be fast. So I usually used a small, and I mean SMALL, bit of silicone lube on the tracks of the pieces, and then use a combination of TheCubicles Angstrom V and DNM37 (not sure what the SCS equivalents would be). This combo with fairly loos tensions makes my MF3RS2M fly with minimal effort, but remains very stable. Hope this helps someone :)

@ChaiLikeKFC Жыл бұрын

add stardust and lunar from speed cube shop to make it super fast

@BINGO2530 Жыл бұрын

It helps a lot...ty for making this as a vod😁

@Sheikhm007 4 жыл бұрын

Great video! Helped me a lot. Thanks for making it. Can you please make a video on how do you make your cstimer look so good.

@Belgarathe 5 жыл бұрын

Just in time. Got a little magic and can definitely feel how loose/uncontrollable it is. I like this video because it is going over exactly where to place the lube. Did first time solve just this last weekend thanks to J perm basic tutorial. Now just working speed into muscle memory and building more intuition. Anyone has suggestion which magnets to use with little magic? I was thinking the n 35 4-2. Not sure if I want to screw it up ie have to remove magnets after the fact. I know I could’ve gotten the little magic m but I wanted to get something basic first. And like a light saber I wanted to tune my little magic cube to my preference. Just out of curiosity from all the members what lube and magnets did you use to make your light saber/little magic more controllable.

@niceplayer4177 5 жыл бұрын

Does anyone know a good speedcube shop which ships from EU ? I really don't want to pay 13 $ for shipping only.

@wilnil 5 жыл бұрын

Search for theCubeSpecialists, they ship for 3 Euros I think Edit: It's German so shipping is probably cheaper if you are in Germany

@sig_das76 5 жыл бұрын

I have to pay 20€ for shipping from cubicle.us. xD

@eskilhr 5 жыл бұрын

Cuboss.se. They are Swedish. But I don’t think tat it’ll be a problem.

@wilnil 5 жыл бұрын

@@eskilhr Unfortunately they only ship to the Nordic countries, except for Iceland. At least that's what they say on their website

@fipgwen1434 5 жыл бұрын

Yes! I really want to get an aosu gts2m but shipping costs just as much as the cube itself... and if i use a dutch cube site (im from the netherlands) it ends up costing even more for some reason

@TheXCuber1 4 жыл бұрын

Lubed my 1x1 turned out great!

@XX_GGBOIZ_XX 4 жыл бұрын

Very useful video , in my opinion i prefer the CFOP way of testing the corner cutting and the screw depth at the same time using the last corner algorithm of R D' R' D over and over again, if the bottom layer feels like the corner piece is going to pop off any minute then I'll tighten it a little, if it can't even do a reverse corner cut then just slightly loosen it, doesn't necessary to be a full solve to find out which side needs adjustment

@cr0ssflame 4 жыл бұрын

I read the thumbnail as: "How to speed a lubecube".

@lasercatto 4 жыл бұрын

Ahahaha

@maddie_1122 4 жыл бұрын

*cube lube*

@sinweijie5194 5 жыл бұрын

0:31 there goes my plans for this Friday

@mirandafoulis3568 2 жыл бұрын

You are the best youtuber in the world! Amazing

@Commander_ZiN 5 жыл бұрын

I had Huggies baby wipes lying around, easier to find than a fresh towel. They cut lube easily and leave fresh plastic, no need for toothbrush so far. They get every tiny bit of lube and leave a fresh surface as if lube was never there. Great after lubing too, keep your fingers clean and the outside of the cube grippy. Surprisingly good, give it a try.

@thebenplays-place9447 4 жыл бұрын

When I set the cube up for the first time after buying it, is it enough if I just put some lube (maru lube in my case) in the cube?

@user-rt1hf7rz4m 5 жыл бұрын

The last time I was this early my v-cube would corner cut.

@danishdanial5596 5 жыл бұрын

I thought that was impossible

@averyshaham1697 5 жыл бұрын

@@danishdanial5596 that's the joke

@mattiekikuchi8739 4 жыл бұрын

V-Ku-Bei !

@thf1933 Жыл бұрын

Im using auto silicon lubricant and ear cleaning swabs. Works nice and one balon can be used for years. Clean the cube once or twice a month. Lube after cleaning and disassembling and then once in 2-3 days without disassembling.

@derpydog695 3 жыл бұрын

Great tutorial I did it all and my cube is lightning fast🤯

@meixiapan3427 5 жыл бұрын

You set up cubes better than I do... ...and yet you said you suck at setting up cubes.

@moritzschwarz3562 5 жыл бұрын

2:19 i dont have to do this i have gan 356 😅

@jaybhat5558 3 жыл бұрын

Same

@danielkahangu4227 Жыл бұрын

Thanks alot, u have taught me how to open the rubix cube and lubricate it, it's now 🏎️🏎️🏎️🏎️🏎️🏎️🏎️🏎️🏎️☄️ fast

@gandharvsawant9372 5 жыл бұрын

I really needed this. I am not lubricating my cube right. Now I will try again and may be get it right.

@imagic34 5 жыл бұрын

I just shove some oil and shampoo in my cube and there you go. Perfect!

@smithchasea 2 жыл бұрын

It’s like putting toothpaste in a peanut butter and jelly sandwich!

@parrishwhilby5817 5 жыл бұрын

He's taking 100k seriously and uploading alot

@cherylburgess4600 5 жыл бұрын

He is at 141k

@SupernovaC 4 жыл бұрын

169k

@elliottthompson2745 4 жыл бұрын

184k

@hamadachetouane9297 4 жыл бұрын

@@SupernovaC Nice

@SupernovaC 4 жыл бұрын

Mr. JFP ok

@justanotheroneofficial 5 жыл бұрын

Thanks helped alot for my 4x4 thanks man!!!!!

@ewankirkpatrickcom 4 жыл бұрын

Thanks Jperm! My moyu mf3rs is amazing now!

@elijaht3452 3 жыл бұрын

For reassembling 3x3: to avoid oll parity, make sure all the Edges are oriented and for corners the top should be all white and the bottom should be all yellow . For pll parity, remove the centre caps and do the void cube parity alg then put them back on

@James-uz3ch 3 жыл бұрын

or just assemble it solved!

@elijaht3452 3 жыл бұрын

@@James-uz3ch but it takes more time and solving it breaks it the lube a bit

@James-uz3ch 3 жыл бұрын

@@elijaht3452 I prefer to assemble it solved so I avoid all of these problems and then scramble it or do random algs after. (it's up to you. it's personal preference)

@draakisback 3 жыл бұрын

You know I find the best way to break in a cube, especially a large cube is to stuff it into a sock or plastic bag and spin it around for a couple of minutes. It takes the lube and forces it to the outside if its not in the core and spreads the rest around to the inner pieces.

@kridayvij 2 жыл бұрын

Instructions unclear. Used this on my dick and now that sock is my cum sock

@deoxis1108 Жыл бұрын

uhhh

@draakisback Жыл бұрын

@@deoxis1108 I'm telling you that it speeds up the process significantly. Been doing this for years on large cubes

@deoxis1108 Жыл бұрын

@@draakisback bruh what it's been two years i didn't think you would respond lol

@happyjohn1656 4 жыл бұрын

Thanks for immediately getting to the point. 9:40 PM 11/3/2019

@smitharsmile Жыл бұрын

THANK U SOOOOOOOOOOOOOOOO MUCH!!!!! THIS VIDEO HELPED ME MAKE MY ONCE A SPEED CUBE, REGAIN ITS GLORY!!!!!!!

@el_sancho_2094 5 жыл бұрын

It probably hurt you to make this video lol thank you for another video dad

@driftingmikey 3 жыл бұрын

Dad???

@aaliyahkauser341 2 жыл бұрын

@@driftingmikey suss y ssiihns so doolsy and he wen went there wron thinking

@driftingmikey 2 жыл бұрын

@@aaliyahkauser341 .....

@itsme5453 5 жыл бұрын

You said that you take out an edge and I can't find it on my 2x2

@Felixfan91 7 ай бұрын

This video was so helpful as didn’t know what to do

@ohiodevildog85 5 жыл бұрын

Thank you so much for this!

@RandomTot 4 жыл бұрын

My only cube is a Rubiks branded 3x3 that i droppes in sand

@IDGs_space 4 жыл бұрын

Good luck reassembling it

@thatguywithtacos1588 4 жыл бұрын

Try fileing it down with a file and was all the pieces with water

@alyk.5525 5 жыл бұрын

Hey! I’ve got a quick question. I just got a new weilong gts3m, and coming from a budget 3x3 that was clunky, it’s suuuuper fast, even on the 8th setting which I’m using now. I was wondering if there was a way I could make it tighter/more controllable so I can ease into it more comfortably, maybe using a screwdriver but I’m not sure which direction to turn and how much etc. Any help is appreciated from anyone and thank you for the quality videos!

@NoahS4226 5 жыл бұрын

When using the screwdriver, clockwise makes it tighter and counterclockwise makes it looser

@ChaiLikeKFC Жыл бұрын

use cosmos

@myguy4w164 5 жыл бұрын

Whoaaaaaaaaa cool thx I never lines my cube because I thought I'd mess it up but it works great now

@tianlianggu4198 3 жыл бұрын

i found a good video for a different type of combination for a 3x3

@chev3792 5 жыл бұрын

The three dislikes are from Rubik's brand users

@HunterPlays11 2 жыл бұрын

Lube a rubik’s brand cube it will be better than a gan 11 m pro Jk

@statmango 4 жыл бұрын

Nice video! I appreciate your saying the requirements to make it solvable (otherwise, I would have assembled it solved). How long does it take you to take apart, clean, and set up a big cube (5x5x5 or 6x6x6)? Not having done it before, it took me about 90 minutes... someone could buy a new cube with the money earned in the time it takes to take apart, clean, and set it up. I wonder if someone who can disassemble and assemble them quickly could go to a competition and offering to do this for $5 to $25 (depending on the size of the cube). Someone could drop it off and return in a couple of hours, just like dropping off your car to get an oil change.

@JPerm 4 жыл бұрын

don't be too thorough with the cleaning part. most of the time I just lube, but when the insides get too bad, I do a slight cleaning so that it's about 80% good and takes far less time. I'm not sure how long it takes but probably around 20-30 min with cleaning and assembling, and just lube without cleaning would be 1 min.

@OrangeChalk 2 жыл бұрын

Hello J perm

@flare6837 5 жыл бұрын

THANKS A LOT, the timing is perfect, my gan X is gonna be delivered today and I was told I had to setup my cube, but I didn't know how, with this tho I do, arigatogazaimasu.

@user-uj3gn2cn8p 3 жыл бұрын

Arigatogozaymaso

@iGiant8 Жыл бұрын

I love how you added the 1x1

@MrRoja15 5 жыл бұрын

Can we see some pyraminx vids please

@raywalsh4382 5 жыл бұрын

Use a q-tip instead of a toothbrush

@romanchicken79 5 жыл бұрын

It's not as easy to clean it. Toothbrushes are more stiff and have more reach in small fixed areas.

@nareshkumar1241 3 жыл бұрын

Wow awesome. Thanks a lot

@jasonkhan7643 2 жыл бұрын

i had some random threadmill lube and motor oil i mixed those and got somewhat of a good lube works fine tho the threadmil lube would be better off alone since its really thick used this on my rubixs brand 3x3 now it runs more quietly :D thanks jperm

@Darkpsychic. 5 жыл бұрын

4:10 ‘What have I done...”

@lollycopter 4 жыл бұрын

We need a protractor, stat!

@dervertica 5 жыл бұрын

Instructions unclear. I lubricated my duck instead.

@mr.machees6488 4 жыл бұрын

Quetzalcoatl what did you lube it with

@im_lyzole 4 жыл бұрын

I lubricated my recording desk using weight 3

@driftingmikey 3 жыл бұрын

A common mistake, really. They're both very similar in appearance.

@MonkeyDLuffy-ro3ge Жыл бұрын

you just saved my life with my 4x4

@MuChengLiu 5 жыл бұрын

JPerm you are amazing also I think you can lube your cube in anyway you want

@Indra-ny1ck 3 жыл бұрын

I cant get off the pieces of my cube cuz i am scaring, i have just 1 cube ;-;

@SAINTLUCIFER_WG 4 жыл бұрын

Core lube is VERY! important, unless you want your cube to bump super uncomfortably along each turn, unlike magnetic bumps this bump is painful, it slows down your cube and it causes a loud sound called spring noise, spring noise damages the cube, it's WAY better to just *stick* to lubing the core for better performance, turning, and speed. PLEASE LUBE YOUR CUBE"S CORE! THANK YOU!

@Hendrucs Жыл бұрын

*laughs in maglev*

@Piokoxer Жыл бұрын

I have a springed cube and i never noticed any spring noise on it. My old cube did have the problem but i have it for about the same time and i don't hear the springs even when I put it to against my ear

@xfsdark 15 күн бұрын

I found out that lubing the outer part of the piece made a big difference Outer part that you can see when you do a 45 degree turn It made the cube feel so smooth It was better than put of the box

@McCsyou 15 күн бұрын

Yea ik it should be included in the vid about it

@virtualjack9927 Жыл бұрын

For me, I like to have a fast cube. For my 3 by 3 (Gan 356 XS) I set my screw depth to 3 or 4(it depends, when i feel like a faster cube, i use 4, when i want more stable cube, i use 3) and spring to 3(being the third loosest) i generally like fast cube, as for me, tighter cube feel slow and i didnt enjoy it as much.

@kearomalley5895 5 жыл бұрын

i put silicone lube in the outside of the pieces then dunk it in a bucket of martian lube then lick it and vuala i also use vaseline for the inside too

@NoahS4226 5 жыл бұрын

Don't forget the WD40

@kearomalley5895 5 жыл бұрын

@@NoahS4226 oh yeah

@mr.machees6488 4 жыл бұрын

Vaseline? Do you mean SOAP

@CubingManiacYT 5 жыл бұрын

@ilovedoritosandmountaindew3569 5 жыл бұрын

Cubing Maniac hi

@itsyourboiluis5762 5 жыл бұрын

Sup

@JPerm 5 жыл бұрын

Hey

@Moltanflames9 5 жыл бұрын

Hey

@bsed_mathmethusalemjudahbl7056 5 жыл бұрын

@Chongbai he cares for you. he don't want you to poop your pants

@anthonyfenner249 4 жыл бұрын

before i put my 3x3 back together i put a small amount of lube on the edge of each center cap in it feels nice and smooth! (the lube is gan's magic lube)

@arthurmller2938 5 жыл бұрын

Thank you so much😀

@Reneryx 5 жыл бұрын

I thought I was a cuber... Apparently not Edit: over two years later, I have lube and average 16 seconds

@YouCuberHD 4 жыл бұрын

3:09 ohhhhhhhh PLL skip

@shadowhenge7118 3 жыл бұрын

So o got weight 5 and it was much thicker than i thought it would be. It's thick and sticky to the fingers, like elmer's glue. Its great for slowing down a cube but wish i knew what it felt like before. I ordered a tube of weight 1 to speed it back up and will find the range i like from that blend.