How To Maintain Your Ceramic Coating | Shine Supply Ceramic Maintenance Kit

Рет қаралды 8,284

Күн бұрын

When it comes to ensuring your ceramic coating will last as long as it should, your maintenance will play huge role.
In this video, Jeremy breaks down everything you need to know to keep your ceramic coating performing and lasting as long as it should.
Products Used:
Ceramic Coating Maintenance Kit - bit.ly/3hL4FYK
Block Party Wash Block - bit.ly/3hMwlfL
Flat Out Wash Pad - bit.ly/3GeX2Tx
Detail Guardz Grit Guard - bit.ly/3hP1oHH
Detail Guardz Scrub Wall - bit.ly/3VBlVO1
Smooth Move - bit.ly/3hRVkyk
Chapters:
00:00 Intro
00:50 Ceramic Maintenance Kit Overview
02:06 Washing “Pro Tips”
05:10 Step 1 Washing Wheels and Tires
05:29 Step 2 Pre Rinse
06:31 Step 3 Soaping
07:02 Step 4 Use the Wash Block to Scrub the lower section of the car
08:06 Step 5 Use the Wash Pads to Scrub the rest of the car
10:09 Step 6 Rinse off Soap
10:28 PUNCH-IT Wet Application with IGNITION
12:35 PUNCH-IT Dry Application without IGNITION
13:18 Drying Pro-Tips
14:03 PUNCH-IT Recap
14:25 How to Decontaminate your Paint with SMOOTH MOVE
16:04 Hydrophobics Before/After
16:14 Outro
Shine Supply Products:
shinesupply.com/
Subscribe For More How To's:
/ shinesupply
#shinesupply #workhard #staypassionate

Пікірлер: 47

@nightdaychannel828 Жыл бұрын

This is one of the best general ceramic care videos I've ever seen! Having a different style lower rocker panel is genius! Also, cleaning the rocker panel FIRST is soooo important because you don't risk cross contaminating the other mits! The mits are different colored to make sure you know which side is already used! Tips about drying and iron removal are also very helpful!

@KevinAClassA 11 ай бұрын

Outstanding content Jeremy ! Stay safe brother.

@SHINESUPPLY 11 ай бұрын

Thanks, you too!

@RH-wi6tv Жыл бұрын

Dude thank you! This is what I’ve been looking for.

@SHINESUPPLY Жыл бұрын

Glad we could help!

@JZ_Cars Жыл бұрын

Great video and info Mr. Jeremy sir!!!

@SHINESUPPLY Жыл бұрын

Absolutely thank you!

@PolishedMobileDetailing503 6 ай бұрын

Punch it has to be the best ceramic detailer on the market. It definitely adds substantial protection and is a breeze to use !

@SHINESUPPLY 6 ай бұрын

I totally agree!

@Starriddin Жыл бұрын

Jeremy, I’ve seen some videos of yours showing Punch It as a spray and rinse booster. Is this just a shorter lasting version of a dry application or as a wet drying application?

@SHINESUPPLY Жыл бұрын

The spray and rinse is a faster way of applying Punch It, however, the dry application will result in the longest protection because there is no water interfering with the Punch It bonding to the paint!

@pwasylak02 Жыл бұрын

Do you ever add any of your other products in to the foam cannon with the shift soap?

@SHINESUPPLY Жыл бұрын

We will add in Holeshot on occasion to our soaps in the foam cannon to add some cleaning power on vehicles that are heavily dirty!

@juliancervantes6761 11 ай бұрын

Would you recommend applying ignition after applying punch it with the dry first application? Just curious

@SHINESUPPLY 11 ай бұрын

A great combo we like to do is use Punch It as a drying aid while drying the vehicle, then use Ignition as a final wipe detail spray to level out any excess Punch It and get the finish spotless!

@boostedpainter884 Жыл бұрын

So we tried using smooth move on a coated vehicle and it ended up leaving gnarly water spots on it. We were able to remove them using clutch. What did we do wrong?

@SHINESUPPLY Жыл бұрын

Bring that Smooth Move is pH neutral, it has no ability to leave staining on the paint unless is dries or partially dries on the surface. Make sure you always keep the product in a wet state to avoid this in the future.

@nancyvaughn837 Жыл бұрын

After I get my Truck done ceramic and I take care of my Truck myself my question is...Can I use your products i my drive way and it goes into the gutter will the product be ok in the street? Or will my neighbors complain? Also my hose how do i make my hose work like yours and also I do have to use a ladder to get to the roof and i have to open my doors to dry the water around the the whole door jam and I have to climb into the bed to do the roof and the window.

@SHINESUPPLY Жыл бұрын

Could you please call us or email as we have some confusion reading your question. Thank you

@alexbryan7641 Жыл бұрын

Jeremy…is cool guy safe on all wheel finishes ie matte finish, polished aluminum, anodized etc?

@SHINESUPPLY Жыл бұрын

Yes! However always do one wheel at a time and do not allow the product to dry on the surface.

@nman7898 Жыл бұрын

I bought a gallon of Throttle, do I not need that then? Said ceramic coating detail spray and to use after every wash for maximum results.

@SHINESUPPLY Жыл бұрын

Throttle is great for ceramic coated vehicles, it is the easiest to use out all our detail sprays due to the fact that it contains no additives, meaning it is not boosting your coating. Throttle will leave your coating crisp and glossy without fighting any shadowing or streaks as you would with a SiO2 infused detail spray. Throttle is great to wipe your vehicle down after every wash, or after a Punch It application if there is any excess product left over. Ignition will be used in between washes to remove light dust and debris, while boosting your coating with a light layer of SiO2. What is special about Throttle other than its ease of use , is it a very delicate formula, and there is nothing in the product that will harm or cover your ceramic coating properties.

@Surface_Mobile_Detailing Жыл бұрын

No pre foam? Whats your opinion on that?

@SHINESUPPLY Жыл бұрын

We use discretion depending on how dirty the vehicle is. Pre-foam always helps when the vehicle is heavily soiled.

@braydenborgardt9775 Жыл бұрын

Why do you recommend agitating again after using the smooth move?

@SHINESUPPLY Жыл бұрын

We believe agitation helps partner with the contactless function that the iron removing product already has.

@Darkstarrider005 Жыл бұрын

What do you recommend for when Punch It and Wet Detailer make your drying towels hydrophobic and they don’t dry and absorb water as well anymore?! 😂 I’ve had to recycle some nice drying towels into other uses.

@SHINESUPPLY Жыл бұрын

Yeah, we’ve had the same issue. It’s a little extra work, but we dump them in our soap bucket afterwards and just give them a good rinse out. This will help prevent that from happening.

@jamesbrowne9959 Жыл бұрын

Agree with Jeremy about placing them directly into the rinse water immediately after use so your drying-aide_booster doesnt cure in your towels. We find that it will still build up a bit so when they start to dry poorly we use a microfiber towel cleaner or APC in water and soak our saying towels overnight to breakdown what's in the towels and then place them in the washing machine in the morning. This works well for us.

@PolishedMobileDetailing503 Жыл бұрын

Spray and rinse punch it , then dry just the water 👍

@kingox-io5cx 9 ай бұрын

What should I do I bought a used truck 2018 and I do t know if it’s was ceramic coated by the previous owner the paint is very nice shiny black should I treat it as if it is ceramic coated like soaps shift soap etc

@SHINESUPPLY 9 ай бұрын

Does the water bead off the paint when you wash it?

@kingox-io5cx 9 ай бұрын

@@SHINESUPPLY yes

@kingox-io5cx 9 ай бұрын

@@SHINESUPPLY I pulled up to shine supply in my truck and Adam from SD was nice enough to take the time to check it out.he let me know what products I should use you guys are awesome love the products thanks shine supply and SD

@mesapainting769 Жыл бұрын

😊

@geefim2144 8 ай бұрын

Has my car cleared with your marine ceramic. Detailer says 7 days before I wash vehicle but I see 3 days on your site?

@SHINESUPPLY 8 ай бұрын

3 Days is correct💪🏽

@jbanda896 Жыл бұрын

Would it be better if you mix ceramic detailer and shift ? Instead of putting ceramic detailer after?

@SHINESUPPLY Жыл бұрын

You could do that, however, the only issue would be if the SiO2 in Punch It dries on the paint, it will leave a very stubborn shadow that needs some firm elbow grease to remove.

@jbanda896 10 ай бұрын

Can ignition be used as a drying aid when the vehicle is wet or does it have to be dry application?

@cuevvaz7756 Жыл бұрын

what he said is true don’t spray it and let it sit, even when it was cool outside it dried up on me and is stained on my coating my fault tho 😔🤭

@warrenbarnhartiv1148 4 ай бұрын

looks very mediocre

@SHINESUPPLY 4 ай бұрын

😅

@SuperCadillac08 Жыл бұрын

Why buy a lot of sponges 🧽 to wash cars? Seems like a sales gimmick just fold your towel in squares, saves you money and time washing sponges after using them.

@SHINESUPPLY Жыл бұрын

There’s no sales gimmicks, lol. I never once state you need to buy the 4-pack. It’s education on how to utilize the 4 wash pads for safer and more efficient washing process. Go ahead and use your towels and follow the instructions I give. The towels won’t be as efficient and effective but it’ll save you money.

@somthingsquishy Жыл бұрын

I’ve used plush towels method and their wash mitts. The mitts and lower panel block pad are definitely better. You can use the towels for a weekly wash maintenance in a bucket full of your preferred rinseless if you want. Anyway, not a sales gimmick.