HOW TO MAINTENANCE WASH A CERAMIC COATING | GTECHNIQ

No video

HOW TO MAINTENANCE WASH A CERAMIC COATING | GTECHNIQ | CAR WASH TIPS

Рет қаралды 10,846

Cars With Keav

Күн бұрын

Пікірлер: 63

@supremedetailingbyj5536 2 жыл бұрын

don’t be so hard on yourself you provide great information in your every video just be yourself have an awesome day bro !!

@CarsWithKeav 2 жыл бұрын

Really appreciate that! I love doing it even if some people comment I am a Obsessed garage copycat if that even makes sense. LOL

@supremedetailingbyj5536 2 жыл бұрын

@@CarsWithKeav haters will hate

@AutomotiveTherapy 2 жыл бұрын

Wow! What a set up you have! Love the cart and how it holds everything, I need to learn how to organize like you 😅

@CarsWithKeav 2 жыл бұрын

Saves time when everything is organized.

@josebrito216 2 жыл бұрын

I like the bloopers. Nice car by the way!

@CarsWithKeav 2 жыл бұрын

Thanks so much, might as well show your faults. LOL

@TheDailyDriven 2 жыл бұрын

Those spray bottles handle those chemicals pretty well. Hellen getting dialed in. You def got a solid wash system!

@CarsWithKeav 2 жыл бұрын

Its about completed and saves so much time. Double pump sprayers can be weird sometimes, but they work well most of the time. Saves half the time and less stress on your hands.

@ericptw6311 Жыл бұрын

Superbe vidéo J'ai appris pas mal de chose notamment les mélanges W5 W6 .. Au top . Bravo...Un petit bonjour de France

@CarsWithKeav Жыл бұрын

Appréciez vraiment cela !

@ericptw6311 Жыл бұрын

@@CarsWithKeav Oui trés bien filmé , une petite question je vais poser par un professionnel Serum Crystal Ultra .. pour le savon de lavage il vaut mieux le gwash ceramic ou juste le gwash au ph neutre ?? Le savon céramic ne va t'il pas avoir un moins beau rendu que ma céramique d'origine ??? Merci

@kevindosanjh8953 Жыл бұрын

Great video and walk through on how to do it

@CarsWithKeav Жыл бұрын

Thanks

@trevino73 2 жыл бұрын

Lmao… Nice bloopers at the end. Just keep it real and keep the great content coming.

@CarsWithKeav 2 жыл бұрын

Appreciate that.

@F80Ho 2 жыл бұрын

Love the setup! One day I’ll have one like it .. one day! Lol

@CarsWithKeav 2 жыл бұрын

I have no doubt, I'll be ready to help you build it.

@skrrtproductions 2 жыл бұрын

Dialed in! Nice technique with the misting too 👌. Do you use deionized water for your entire wash?

@CarsWithKeav 2 жыл бұрын

Only the final rinse, I have not tested yet whether the system can handle full pressure and maintain 0 PPM. The resin costs a good bit and you would go through it quick. I use it to dilute my chemicals as well whether its spray bottle or foam cannon.

@ShrugMedia 2 жыл бұрын

Not gonna lie I thought you had some crazy fast hands when you where using the spray bottles lol also I don’t think I’ve ever seen a wash method like the one you did in this video I believe you called it “the wrap around” with 3 different heights very interesting but seems affective ✊🏽

@CarsWithKeav 2 жыл бұрын

I have a few methods all depends on how dirty the car and what coating I'm working with.

@justesengager3993 2 жыл бұрын

Hey, thanks very much for this video. I have a couple of questions for you. Why do you do a 'double dose' of W5 and W6 (spray bottles and then cannon)? I guess depending on the condition of my car I could use just spray bottle application? I've always been curious about the effectiveness of mixing products and your concoction seems to be a nice mix. Thanks again.

@CarsWithKeav 2 жыл бұрын

The direct application I put on parts of the car that get the most abuse. Lower half mostly. I do the foam as its a better lubricant for the mitt and it allows me to get the W5 and W6 onto the windows, roof, etc. Since its PH neutral you don't have to worry about using too much. I learned of this concoction from Gtechniq themselves on multiple youtube videos they were on explaining they can be mixed together without impacting each chemicals effectiveness. Allows a way more efficient wash process.

@justesengager3993 2 жыл бұрын

@@CarsWithKeav Thanks very much for the info.

@FastRedPonyCar 9 ай бұрын

I've got my TooCust brand cart, Active 2.0 washer, hose reel, McKillans stainless fittings and quick disconnects and a few other things showing up this week/weekend and the concoction mix is a good idea. I've been doing multiple passes with the various products the last couple of washes on our cars so this will speed that up. I've never bought the big gallon containers though... mainly because it's a big financial commitment to a product. Both our cars have Gtechniq syrum ultra and Exo and I trust the brand and have been satisfied with the small bottles of the W4, W6 and W3. One question is whether or not those huge product containers come with the pump top or is that something you buy separate and if so, how do you know it will fit the opening? My only concern though is that the W3 ceramic wash is sort of no-suds by design and I'm not sure if I should be mixing with anything else?? I may start mixing W4 with W6 for the pre-contact wash foam stage but again, does mixing it like that cause the W6 to lose it's effectiveness at breaking down the iron and stuff?

@CarsWithKeav 9 ай бұрын

That’s going to be a sick setup! Syrum ultra is amazing as well. I would not mix W3 as you don’t want a protectant being mixed with maintenance wash chemicals it will inhibit their ability to clean and dissolve the iron. Per Gtechniq you can mix W4, W5 and W6 all together. They have shown this on videos with Chicago Auto Pros KZfaq channel. They call it the concoction. I have used it many times in a foam cannon, but for an effective maintenance use W6 separate on the high traffic areas then you can foam. They do not come with the pumps, but Gtechniq sells their pumps on their website. Depending on how often you wash most of the times the big containers are a bit much. Especially since soap and chemicals don’t last forever. Their containers are bigger as well at 5 liters which is about 1.3 gallons.

@ghoulbrothersgaming1342 4 ай бұрын

We're did you get the cart 😢 I didn't see it in the link description

@CarsWithKeav 4 ай бұрын

Not available from anywhere I know other than industrial supply sites which want $500 to $600 for them. I got lucky one day on Amazon and there was one available.

@allseasondetail2485 11 ай бұрын

Love the video. Homie 😊👍

@CarsWithKeav 11 ай бұрын

Thank you

@jayh6066 Жыл бұрын

Great video, thank you :-) When you used the W5 and W6 to spray the panels ( before the foam canon with W4 ) can you mix the W5 and W6 together in the same spray bottle? or is it best to keep the chemicals in separate bottles? Would I be able to use a small pump pressure spray bottle for this?

@CarsWithKeav Жыл бұрын

You can mix them and even put them in a foam cannon with W4. Only reason I was using spray bottles it I wanted to soak full strength., Foam cannon would dilute the mixture. Mixing them will work no issue and actually thin out the W6 so it isn't so thick and spray better. Depends on the pump sprayer as some don't spray well with thicker liquids like W6.

@Spectrum_Auto_Spa 6 ай бұрын

I have halo on my PPF. Apparently CSL and EXO v5 can be used over PPF and vynil. What’s your take on that

@CarsWithKeav 6 ай бұрын

I have had CSL and V4 EXO on a satin wrap before and it worked really well. That car has a new wrap and now I’m running the DIY Detail 8 year coating which is kind of a mix of those two and is working well. Only issue you could have is if the wrap or ppf has self healing properties the CSL and EXO could interfere. HALO was developed to not mess with self healing or change the gloss/satin appearance of them either.

@Spectrum_Auto_Spa 6 ай бұрын

That’s good info. Thank you so much.

@15DurangoRT 2 ай бұрын

Why is it called a double mist sprayer?

@CarsWithKeav 2 ай бұрын

Its mists on the pull and when you let the trigger go. So you get two sprays on every pull basically.

@jrphoto8179 Жыл бұрын

Hey how soft is the wash mitt compared to microfiber madness delimit the new soft one? What car soap is the best for ceramic coated cars between carpro reset and gyeon bathe or gwash or gsf? Thanks

@CarsWithKeav Жыл бұрын

Going to be honest they all have good soaps and you can’t go wrong with any of them. All are coating safe. I have not tried the microfiber madness, but it looks to be the same and most all of the mitts are the same. Both would be a good choice.

@kevindosanjh8953 Жыл бұрын

Is it okay to put a techniq ceramic sealant on a ceramic coated car done by a different brand by daimondbrite with so many videos people say it's pointless to put a ceramic sealant on coated car

@CarsWithKeav Жыл бұрын

Topper coat is always a good idea. Ceramic coatings are actually prone to water spotting. The topper coats help prevent them. I put a ceramic sealant on almost everyone just stacking those layers of protection.

@kevindosanjh8953 Жыл бұрын

@@CarsWithKeav thx for the reply and your take on it do more videos your content is great to watch than most on this thx again much appreciated 👍

@_f30_b58 2 жыл бұрын

Very useful info bro.

@CarsWithKeav 2 жыл бұрын

Thank you bro.

@Blackpearldetailing Жыл бұрын

Where did you get the pumps for the gallon containers

@CarsWithKeav Жыл бұрын

They are 5 liter containers and the pumps are only at Gtechniq, but its mainly just for their style jugs, but here is a link to a gallon pump dispenser. amzn.to/3CAvOEX

@slab817 Жыл бұрын

that's a sweet ass paint job on your beamer

@CarsWithKeav Жыл бұрын

Thanks

@Manosh0 2 жыл бұрын

Thank you for video sir. Do we have to use W-4 or can we skip to G-Wash?

@CarsWithKeav 2 жыл бұрын

You can use Gwash. I use W4 as its a little stronger of a soap.

@WORMGERM 2 жыл бұрын

What if my car isn't cool like a BMW but just a basic daily driver, can I still wash it?

@CarsWithKeav 2 жыл бұрын

I've washed all my cars over the last 24 years of owning them only the last few have I had the ability to own a cool one, but to answer of course. My wife's old minivan before her BMW and my old Ford Focus before my BMW all got washed good. I can finally afford better tools to do the job, but in the end they all ended up clean Ryobi and a mitt or my current setup. Taking care of them inside and out gives you best value when trying to sell them as well.

@aarongonzalez2156 2 жыл бұрын

Nice!! Can you give us a run down of your Jerry can gallons on your cart and their uses? I'm not familiar with gtechniques line of products. Also you don't finish off with tire shine? I would recommend Koch chemie PSS beautiful satin finish and makes the tires really black

@CarsWithKeav 2 жыл бұрын

I should have been more descriptive sorry about that. W5 is all purpose cleaner, W6 is an Iron Remover, W4 is a Cirtus Foam I use for contactless wash (Foam Cannon), Gwash Soap I use for contact washing with a Mitt, Easy Coat is a spray on and rinse off ceramic style coating good for up to 3 months. That is each can on the cart. I prefer very clean natural rubber look. The easy coat gives it a little protection. Its hard to get the tires to stand out when taking picture if they are really dark makes the wheel gap look better in photos.

@IdkWhtYouDid 2 жыл бұрын

Hey man, what did you mean when you were talking about the foam cannon being auto mix? I have a pf22 and thinking of switching to this.

@CarsWithKeav 2 жыл бұрын

There metering tips that slow the siphon of the soap from the bottle to a small enough amount the unit will mix in the manifold just the right amount. This way you only ever have to put full soap in the bottle. A full bottle can last up to 10 washes for me. as it uses about 100ml of soap with the tip I use.

@CarsWithKeav 2 жыл бұрын

Also, that unit does not come with the tips, but has the weighted ball that accepts them. You can get them from Griots or they have the BOSS foam cannon that already comes with them. You can also turn you PF 22.2 into a auto mixing cannon. I show in this video here the concept of Auto Mix and how to get it to work with other cannons. kzfaq.info/get/bejne/p9V6drai1Ja6qI0.html

@IdkWhtYouDid 2 жыл бұрын

@@CarsWithKeav thanks for the reply, is the soap you put in there diluted at all or neat ?

@IdkWhtYouDid 2 жыл бұрын

@@CarsWithKeav I think I am starting to understand, just wondering if after you do that mod to your foam cannon are you still diluting your soap in the foam cannon or do you just put the soap in neat?

@DiegoRodriguez-wj2nb Жыл бұрын

@@IdkWhtYouDid Hi, I think he puts the soap neat.