Awesome little hack! This helped me get my vintage Smurf AM radio back in working order, with no additional money put into it. Thanks for making a video that's clear and straight to the point!

Helpful as I never considering reusing the battery top. The 9V connector on the electric on my front door broke when I pulled the old battery out to replace it. It would have cost $119.00 to replace lock or I could have waited a few days for replacement connectors to arrive. Then it would have been necessary to splice the wires together. You made my Saturday!

Best tutorial ever! Thank you.

Nice job! I figured out a work around as I don't have a soldering iron. One side of my connector was still good. The other side came off with the old battery (probably a small leak corroded it?). I pulled the missing connector off the battery as you did and cut it down to the side I needed. I stripped back the wire and put it against the battery terminal. Then I put the connector on TOP of the wire to hold it in place against the battery terminal. Worked great and no waiting for parts or a soldering iron. :)

Thanks a lot for this video. My sump pumps 9v battery was dying (for its alarm I think) and it uses one of these. Had no idea what it was, and I was afraid to just tear it off and create a larger problem. Thanks to you I'm all fixed up now!

Thank you I was looking for an old walkie talkie or something to rip the connector off of, never thought about using an old battery instead! Used hot glue to seal the connector after soldering the wires.

Thank you! Saved me in a pinch!

Extremely helpful! Even though it turns out there was more damage on the circuit board, but this was a great learning experience anyways!

Nicely done!!! Thank you!

Thank you so much. I will use this for a school project

Dope! Made my life SOOOO much easier!

Tysm this just saved my chances in a school competition

Great. You helped me a lot!

Thanks for that you have just saved me some money, 😊😊😊😊 Just a little thought have you considered "heat shrink" over the connector then smaller heat shrink over the wires 🤔🤔🤔🤔

Thank you for showing wire polarity.

I'm feeling idiot to never think about it.... thanks man!!! ;)

That's amazing I never would have though of that. Thanj you

I like to make mine so the wires come out the middle and then hot glue over the top. I find that the ones that the wires go on the short side tend to break easier.

Cool!! Thanks 🙏

dude thank you for you're tutorial but i have a question if i use wires to connect it and connected it with 4 dc motors and many wirings does it cause overheated and possible explosion

thanks bro......... you r awesome 😋😋😋😊😊😊😊😊😉😎

Absolutely amazing. It costs ~ half a dollar PER clip, on some electronic web sites. Unfortunately, I don't have any (dead) 9 volt batteries. :(

Well this wouldwe helped me a lot but i dont have a drained 9v but great video anyway

Wow! Man you done very good work but the only one 9 volt battery of h i w can get give shine to a LED bulb

great video

Great but what about the connection into the thing you want to power with polarity switch.thanx

👍👍👍😃

Good 👍👍👍

Genius. Great solution. Thanks and Merry Christmas!

I Find For this,Finaly 🤩🥳

Nice video

Bukankah besaran konektor sama yg berakibat batrey nya gk bisa masuk y min.. Apa batreynya konektornya agak dikecilin pk tang

Good 👍

Wow cool

thank you. just sold 200 of it. around 5 dollar to all my idiot college friends.

Thank

I made this it works and it's very hard to remove that layer of battery

Is it okay if the red wire is copper?

Can we use any connector with any 9 volt battery

Wow... sooo much easier than the 10pk of connectors on Amazon for $3

very very nice

It would be helpful to see a solution for covering the bare solder connections. I heard one person mention a hot glue gun. Any other ideas?

nice

You can use another object instead of a soldering iron

I can't solder the wire to the metal part of the connector, why is this?

Nice

Important question: What was that thing called that you used to weld the wires to the connectors? And where can I get one? 🤔

Please bro tell me Which is negative and positive side in 9V battery

It is true

Please mate reply me in this comment, what do you call the tool that you used to connect the wire into the 9v baterry clip?

Nice cap

what if I dont habe another 9 V battery?😃

That's too much trouble just cut the back of an alarm clock. Then they tend to use 9 volt batteries

can we use any wire

can anyone tel me pls that is it important to use that burner to stick wires and the wires colours are important or not

Pay $5 to destroy a battery and recycle it for a connector that costs $3, upvoted video

How many years has it been since you washed your hands?

এই বেঠারি গুলো কোথায় কিনতে পাওয়া যায়

How do I connect wires if I don't have a soldering iron plz reply

good video but if your using red for positive and black for negative then you put them on the wrong terminals the large terminal is negative the small one is positive, unless you just like short circuiting things...

Vote masinkaja milegi

Dus not work

😤😤😤😤😤😤😡

नहीं बन रहा है।😖🤐😔

nice