Nice mustang. My Grandmother bought one new in 66 from a dealer and I loved the Chrome bolt on Air Conditioning in above the automatic stick. What a cool car. 5 stars and Respect. Randy H DSD

Just put flames on it anything with flames go faster

Hey Jeremy, great video. Can you tell me where to buy a good battery online for a Peace B09 50cc? I watched all four videos. Thanks.

Thank you for your honesty. Because when a person loses that, there's nothing else left of them.

Does the CY50-A VIP 50cc use the long case engine or the short case engine?

How do I know what kind of kick start lever to buy or fit for my 2002 zongshen metro 49cc moped( bought the moped used and it didn't have one)

I have a CPI GTR 50 TYPE JA, do you need to change the thing that controls the lighting also when you go high voltage and performance?

I cover a lot of these types of inquiries on my channel for years now. Glad to see others giving advice on 50cc performance. RH DSD

i suspect the modest top speed improvement is due to a speed governor or something like that. years ago, a buddy of mine had an old motobecane that either broke or the governor wore out and down some big hills, he could go about 50 mph.

hey I want to know if you have a video on how to installed all the parts

I have a 2008 EUROSPEED ES250D moped its all stock what can I do to get more power and faster pick up? is there a performance kit that includes CDI box, coil pack, spark plug, and a performance voltage regulator for better Power? my lights dim a little when I press on the brakes

Doesn't the big bore kit put a lot of strain on the rest of the engine/drive train components which were designed to handle HALF the power? Or is the fact that you're using the same smaller valves a restricting factor when compared to other mods such as valves, larger carb, exhaust etc., thus limiting the added strain on the rest of the drive train?

Got anything for a '79 Garelli Gran Sport? I've installed .080 mm big bore high compression piston, 37mph on flat ground is all it gets.

hey i just bought a mallossi aprila sr 50 r do you have some tips for tuning it ? thankyou

Wow thank you for showing me how to do to raise up the speed.

I have a ice bear trike 50cc it’s a pst 9 model only has 400 miles on it. I put up graded coil and cdi box and changed varator rollers to 5 grams instead of stock 9’s it seems to be doing better but I noticed some one had tried to upgrade it but they didn’t know how to do after going threw it I noticed that the bolts that hold on the cover are going to need replacing and the varator is to because it has some really rough spots on it so I don’t know what they did but I want to upgrade it and get the cover because where the starter kicks out it’s been drilled? I didn’t use that. But I’m having a hard time finding the cover because kick start is in center of cover and I don’t have a lot of money to play with so I want to know if you have the cover and bolts and performance varator and clutch and a Kevlar belt that I can put out it so that is all done and right I can try and find your number so I can give you the engine number because I want to put a 80cc or 100 cc kit on it. I’m disabled and I’m working with a broken right hand and cracked wrist they can’t fix. So I want it to go faster keep up with traffic and be able to get out and cruise in the country and just ride . I would be happy if I can get it to do 50 55 mph because it would be safer to get out of the way of the manic’s and just be able to cruise in country will make me happy. But I hope you can get back with me. But I’ll look up your number and I am in Indiana so I don’t know what time difference is or where your at but I like you videos and I do wish they would actually show you changing things like performance varator and clutch and Kevlar belt. But I’m going to also get a performance carburetor and jets to go with it. But I am hoping that the 80cc kit will get it to where I want it. But I do know that the shocks are junk it has nothing I weigh 174 and they bottom out and you hit a bump ouch. I bought it used and not running but it runs fine now and rides good if you can avoid bumps so I gotta lot I am doing to it but it needs the cover and bolts and performance varator and performance clutch and Kevlar belt because they bugerd them up and those are important things that have to be right. God bless you guys and thank you for your videos they are very helpful.

I have a peace sport with upgrades. As all Peace Sports comes with headlight problems. Think I need whole new wiring for this. Any ideas? Could be good business for you as well.

My piaggio zip 100cc goes 43MPH and isn't really loud. In fact it's a very quite scooter. How would i get more speed and loudness out of it?

I put that cdi on my scooter and it seems to do fine on flat roads but going up hills it wants to bogg down and cut off then I stop cut it back on and baby it up the hill then back on flat surface it does just fine

Ok this is whats up I got a 2013 150cc v.i.p an im just looking for a little more low end what would u recommend

Yeah I have a question do you have to use synthetic oil or can you use regular oil

I have an Ice Bear Mojo trick with a 100cc big bore kit. The rest of the scooter is bone stock . What would you recommend for getting it up to top speed? Including sprocket and chain kit. I want to get it so I can ride in a 45 mph zone, with a little more throttle. So I don't have to go full throttle all the time. At 45 mph please let me know what you suggest thanks

Will the beast big bore kit fit my 2013- 2014 Rss Thunder 50 cc scooter ?

OK, so i had a Keeway Hurricane 50. Found that i got the same results as u with the stock package. I'm 6.1 tall 190 and drove to my place of work 18.5 miles each way. My question is that should I get a 4 stroke 50 now? Ooh, i'm in NYC Bronx with a lot of hills... or just invest in a 250cc???

If i did some of these mods, would I then have to get a motorcycle license to drive it (I live in Canada)

Yea I got a 2012 honda ruckus 50cc scooter I already got a Yoshi performance exhaust on it but it's not enough please help wanna go faster and not loose power

so I am riding the Honda ruckus 2016 factory new. I get about 37mph on flat road I wanna get it to about 40-45 I'm 140 pounds. is the ruckus able to be increased to that speed without putting a higher engine on it keeping it at 49cc? brand new to the moped world but I love my ruckus. just need some help making it go faster.

so I am riding the Honda ruckus 2016 factory new. I get about 37mph on flat road I wanna get it to about 40-45 I'm 140 pounds. is the ruckus able to be increased to that speed without putting a higher engine on it keeping it at 49cc? brand new to the moped world but I love my ruckus. just need some help making it go faster. thank you

when I turn the gas on my 50cc taotao thunder it bogs, for example I park pointed up hill and turn full troudle and it lags bogs I can actully hold it back what do I do it is bran new only 1 mile on it I afraid of using it help me

Can u put a 80cc bore kit and 160 cc carb from my other scooter on my new scooter???

will al these 4 parts fit my aprilia sr 50 r pagio engine?

israel rivera1 second agoI have a 49cc scooter. Was running great. Park it and the next day it wouldn't start. When you try to start it ,it turns. But when you open the throttle the motor tries to stop. Just like if ur battery was low. If you let go of the throttle it will turn over at normal speed. But wont turn on. I replace the spark plug. Checked for spark. Cleaned out the carb and adjusted the valves. What can this be?

This is a really good video, especially in a field where most videos are 15 year olds cutting a wire here and there. Good ressource for those of us that are interested in something a bit more sophisticated.

can you aka an electric scooter from 50speep to goes faster ?

I hear you can pull a wire off the CDI box that controls top end. Is this true

i have a 50 cc tao tao 2014 can i get it to go around 45 mph ? what would i need to d0?

Are your kits compatible with iceberg maddog pmz50-20?

Im so happy that you are not calling it a moped.

I have a 2005 CPI gtr50. It has a ditital speedometer. I see videos on youtube of ppl with the same scooter going 50+ mph. I cant get mine past 42. What can i do to get mine faster?

Hey I have a Tank scooter urban I'm am just wonder something if it goes up to 60 does that means it's a 50cc let me know k thank u this is marlene

you have my dream car. which year is that mustang? guessing a 65-67

What parts are good for a 2014 Yamaha Zuma X 50cc? Just want to know specific items/parts so I don't f@$k anything up:P

I think the biggest bang for the buck, is a bug bore, and a big valve head, with a cam! And exhaust, maybe as far as a 24mm carb upgrade, maybe cut the head, to get 10.5:1 to 10.85:1 close to 11:1 compression ratio, I wouldn't go over, unless you have access to 98- 100 or higher octane fuel, I have a big valve head on the way, I'm hoping it will make the difference! Along with a 24mm carb, and oil cooler, (and a aftermarket or 125-150cc intake with a bit of modifications, and head porting,). I have a couple 50 cc heads that are ported if anyone wants to buy them, one has about 2 hours on it, the other is new, I have a A9 cam to go with one, slightly used, the head is the long valve version, more power ponential when porting, it only needs bigger valves! If you can find a shop to do the valve job on such tiny valves, the long valve heads have room to raise the ports nearly 5mm, a good 3/16" with big valves it can make a difference, especially with good springs, and titanium retainers, witch I also have coming with the big valve head! 3.5mm larger valves should make a difference with the cam, 24mm carb, and the springs, and titanium retainers! It should spin to 11000 rpm at least, and make a good bit more power, my next step is a 150swap, if it doesn't make enough power! A 52.4mm bore with stock stroke should do it , with the head and all, if not surely a 171cc should definitely get me where I need to be! But a great set, with a big bore us about the only way to get more mph! A head with big valves and better springs, so it can spin over 8k rpm will also help, a gear should get about 10-15mph, and the capacity to spin 10k + rpm, should be capable of about 10mph + so it should wind out to 60-65mph, and Cruse at 45 easily! But race clutches , and coils is about the last thing to buy, but a 20mm carb, and a better intake, and exhaust, for up to 80cc bigger I'd go with a 24cc CV carb, or a 20mm slide carb, a modified stock air box works fine, fir about any power level!

will this work on a old panterra freedom 2004 model

i have the same scooter as in the video i just got it and starting to have trouble it wont start i rode just fine then when i was driviing bogged out and wont start now

Thank you for posting this video! I also watched your "Beast" comparison video. Is that a 139QMB motor? I'm mostly concerned with getting faster acceleration out of my scooter, but a faster top speed would be nice too.

Are you from Michigan because I'm looking to do all these mods on my moped and if so I live in Adrian mi

like what u said i have a 50cc moped i have pro.blems going up hills im going to try what u did

Hey Jeremy do you reply at all? If so I’d love to ask you some questions about a scooter /bike I have

Please will you send me information on my lexmoto echo 2017 it's oready been deristicted but slow up hill please help

Im 14 Will I loose my scooter if I upgrade it? and should i straight pipe my yamaha bws50

Do you have kits for a Honda metro

Hi . I really want to upgrade my speed and perfomance overall on my Sym GTS 125i evo. The current max is at 72 mp/h slightly downhill. Driving uphill i get down to ridiculous 40 mp/h. Any ideas what I could do/swap on the bike? Any help would be greatly appreciated. Thanks a lot!

Hey nice video, how would this run for a 1980 Honda express scooter. I'm thinking of getting one and doing upgrades immediately

anybody know what year mustang that is in the background in the beginning

can you put that on a Rieju rrx?

I enjoyed the video. I have a 2014 ICEBEAR 3 wheel scooter/ moped. The title says it's a 49.5 cc. No one can tell me how to derestricted it, and thats after having had it in 3 professional scooter shops. My second problem is that I bought it second hand and no dealer will sell me parts because I am not their customer. I need both rear fenders and the CVT cover for the clutch, drive belt and kick starter. Can you offer any help with these issues?

Hi my name is Steven I have a 2009 some thing it made in China it md50QT-5 I was going to put in GOOFIT Carburetor for Scooter Carb GY6 50cc 60cc 80cc Chinese 139qmb Moped 49cc 60cc I was seeing if that was going to help it go like 50 to 60 I'm try to make it go alittle faster. What wood be the best and cheap options thank you

I don’t know how restricted the stock cdi chips in the US but here in the uk 50cc bikes can go +45mph.

I have a 49cc yamaha razz scooter, how can I make it go 5-10 mph faster?

I talk to you early today 06-27-14 and i like the idea the have one and even i talk with one of my bodies and he want one to so my question its if we buy to you two on the same day and i pay cash can you give to us some kind of discount???

i have a 2018 Toatoa ATM50A1 and i was wondering what parts should i buy to make it faster?

Can anyone tell me it will work on icebear rocket 2022,it ky6,will it work with performance parts?i try email him but no reply yet,it 50cc

Great videos. Thanks

Great video!

Hi im getng a 50cc scooter run 50miles hrs wat can u advice. Me

Does it work for a 49cc roketa 2008

What can I do to a 2018 taotao 49cc?

Hello Jay, my scooter runs fine, however I had installed a high performance carb on it and it runs stronger, faster and does just what I want, however after full throttle for just a min it bogs back down and dies, it almost got me hit a few times, any Ideas

I've been trying to reach you for a week I placed an order September 25th it's October 5th the post office says it has not received

well I have a 49cc manco matrix 2008 I was wanting to know what is the going price for a 72cc big bore kit? thanks

i have a 50cc runs great until i turn it off then it has to cool down to start

High performance cdi only un do's the rev limit maybe a littke more voltage ok if your monitor your rmps giving it potential to over rev n blow up... bore kit choice heaver weights int the varirator

Hello, i have a 2014 49cc TaoTao VIP 4 stroke and it only goes 30-33mph max and my max rpms are 3500. Is this normal for this particular scooter? And i would like to make it go faster with more rpms, think you can help me?

riding the Honda ruckus 2016 new. I get about 37mph on flat road I wanna get it to about 40-45 I'm 140 pounds. is the ruckus able to be increased to that speed without putting a higher engine keeping it at 49cc? just need some help making it go faster.

Hey do you have performance parts for Vespa piaggio 50 2006 ? Thsnks Phil

What is name of that scoter in video?

Hello, will the beast 100cc bore kit fit my 2013-2014 Znen RSS thunder 50 cc scooter?

I am riding the Honda ruckus 2016 factory new. I get about 37mph on flat road I wanna get it to about 40-45 I'm 140 pounds. is the ruckus able to be increased to that speed without putting a higher engine on it keeping it at 49cc? just need some help making it go faster.

I have a derbi senda r 50cc. It works fine but it basically can't ride uphill... I really don't know what to do because I don't want to have a higher top speed.

what do you advise to super up my dongfang 200ccsst scooter.

I have a BMS Romans 50cc scooter. I want to make it go alot faster. What can I do and where can I buy the parts... Can I make the 50cc into a 150cc. Please let me know. Thanks.

can this work for a Honda Ruckus. I have a brand new 2016, it goes about 36mph flat but I wanna get it to 40-45 is that possible while staying with the 49cc? brand new to the moped world

i have a stock coil but i ordered a performance cdi. can i use an aftermarket cdi with a stock coil?

The problem with big bore kits is that they raise the cc too much and if you just got a provisional license and you can only have a 50cc may get you in trouble

II just got a 49 cc icebear scooter I'm gonna change the coil ..,icbox ..I will put a 80 cc bore n a performance exhaust you not crazy super performance but just enough to make a difference iam 34 years old I'm not going to race with it but because I'm a big guy 250 p I will like to get some speed n torque I'm not looking to spent crazy brand name performance stuff ...just enough How much I need to get those item s ??

I have a timing issue. My question is on the gy6 50cc, which marks on the stator cover are the timing marks? ... I've tried to put it in timing using the T mark with the line just after it but the crank just spins over to the F mark...

THANKS YOU FOR WHAT YOU DOING

u should do a vid on making 150cc faster. the video might be more interesting if you was to edit it with clips of performance gains

Where is the cdi box located

i have a 49cc taotao speedy this scooter is my daily driver but i have alot of people getting upset with me driving it so slow on the road what can i do to make it go faster?

This video was good

did you tested the power gain with each component aded to the scooter?

The coil is the best for performance

My moped stop running can u help ill share a cideo

Please tell me is this a two stroke or four stroke scooter thanks!!

Watching this in 2022 hearing him say "20, 40, 50 dollars" hits hard

big bore kit and new carb and better exhaust that's the best thing you can do

How do you install it?

i have tao tao moped 2013 what brand yall have be best for it? coil n cdi box 49cc motor need it faster