How To Make A Box - Full Guide - XTool D1 Pro 20W Diode Laser Cutting Project

Рет қаралды 36,064

Күн бұрын

I'm going to be making a lot of these....
⭐xTool D1 20W Laser Kit - www.xtool.com/products/portab...
⭐ xTool Air Assist - www.xtool.com/products/air-as...
MakerCase Plans - www.makercase.com/#/basicbox
🛠 Notable Items and Tools:
12x18 Wood - amzn.to/3Dt90If
Honeycomb Table (400x400mm) - amzn.to/3RmYaba
Amazon Link To XTOOL - amzn.to/3qsZbCG
#xtool #lasercuttingmachine #laserengraving
00:00 - Intro
00:24 - LightBurn Set-Up
08:11 - Into The Shop
14:06 - Box Assembly
**********************************************************
A Notice from Red Beard Ops LLC:
The information provided on this channel is for entertainment purposes only. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and Red Beard Ops LLC will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Attempting to emulate any of the actions or projects put forth by this channel should not be done without training and even then, at your own risk.

Пікірлер: 48

@redbeardengineered Жыл бұрын

Here was my initial review of this machine on my Red Beard Ops Channel - kzfaq.info/get/bejne/hbBdiMhi0trVl5s.html Here is the Laser - www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=RedBeardOps&variant=43022796554479

@mrgrinch61 21 күн бұрын

THANKS VIDEO THERE IS POWER IN THAT BEARD

@redbeardengineered 21 күн бұрын

Heck yeah! LOL

@Shinlocke 11 ай бұрын

Looks good, great walkthrough in the process. As someone who assembles a lot of mdf laser cut terrain, a tip… when doing glueup with something like the top that needs to fit, glue up the same way but set your top in the piece in place then tape while it is drying. That just ensures that the glue dries and form stays for a snug fit but still able to clean put the top on and off. You can also make a jig with magnets to hold corners snuggly, I use legos 90 degree with magnets and a matching piece for the outside to hold corners without holding it too tight from a clamp or too tight of a tape up.

@larrykelly2838 Жыл бұрын

Very neat project.

@redbeardengineered Жыл бұрын

Thank you! Cheers!

@bretttaylor5608 Жыл бұрын

Pretty cool

@redbeardengineered Жыл бұрын

Thanks Brett, have a good weekend!

@honda35061 Жыл бұрын

Thank you very much for video.

@redbeardengineered Жыл бұрын

Glad you liked it!

@millionmilerclub Жыл бұрын

Nice I loved it.

@redbeardengineered Жыл бұрын

Thank you! Cheers!

@sudo_nym Жыл бұрын

Neat job, dude! Nice USP for your knives, too. 🇬🇧🙏🏻🇺🇸

@redbeardengineered Жыл бұрын

Cheers Sudo!

@flmoose1 Жыл бұрын

6mm/s with 86-88% power is perfect for 3mm birch with the D1 20W

@redbeardengineered Жыл бұрын

Thanks a bunch mark! Cheers

@NinjaHempKnight Жыл бұрын

If you use the kerf offset within lightburn you can fit these boxes together without using any glue

@redbeardengineered Жыл бұрын

Very cool, thank you Michael!

@NinjaHempKnight Жыл бұрын

@@redbeardengineered I'm still learning myself, but it is a simple process to calculate the kerf, & I think projects look so much neater & professional looking with no glue leaks! Keep up the good work .

@user-fi5nb3pu5e 7 ай бұрын

I liked. I considered. . . .So I sub'd

@redbeardengineered 7 ай бұрын

LOL, cheers!

@steveorel3097 Жыл бұрын

Great tutorial as usual, your review help me make a decision to buy the D1 pro. What are you using as a base underneath the wood in this video? Thanks and keep up the great videos!

@redbeardengineered Жыл бұрын

The laser sits on a piece of MDF... That I cut to fit a Rogue Yoke (Fitness Equipment). Cheers Steve!

@daimyo2k Жыл бұрын

Hi R.B., great video, just got my D1 Pro 20w and this is the exact vid I was looking for. Quick question... what type of wood and what thickness did you use for the project? Thanks =]

@redbeardengineered Жыл бұрын

Hey man, good luck with your laser! This is the wood I used - 12x18 Wood - amzn.to/3Dt90If

@zero00044 Жыл бұрын

In lightburn, just select a box then an image, then use the center x and y tool. It will place the 2nd object directly in the center of the 1st. Took me forever to realize this. I was just guessing where the center is and only having a 12 inch mini bluetooth keyboard with a 2 inch touchpad for my work table (do everything out of my apartment bedroom) made it really difficult to move objects precisely.

@redbeardengineered Жыл бұрын

nice tip!

@wilsonbrothers4183 Жыл бұрын

What do you do about the smoke and fumes? Thanks for the tip... good one

@zero00044 Жыл бұрын

@@wilsonbrothers4183 I have a portable air conditioner in my room with an exhaust hose. I connect the inline duct fan to a dryer vent hose and put it through the ac hose after disconnecting it from the ac and insulate around it with a bunch of plastic grocery bags lol. During the warmer months, I have a doggie door that i dont really use right by where I have my engraver and just put the hose out that. That inline duct fan is key though.

@wilsonbrothers4183 Жыл бұрын

@@zero00044 brilliant ...thank you

@redbeardengineered Жыл бұрын

@@wilsonbrothers4183 I normally leave a door open and a fan running.

@mevischifamba3300 Жыл бұрын

cool video, how do i make a box with curve from top to bottom, thanks

@redbeardengineered Жыл бұрын

Good question! I'm not sure

@DevonAllen07 Жыл бұрын

Very nice!! Do you think the 10w with air assist could make this?

@redbeardengineered Жыл бұрын

I do think so. I haven't tried it though.

@haxensalat Жыл бұрын

I see black "fadeouts" on the bottom side of the cutting edges. Im a llaaser-cutter-beginner, but your cutting power seems to high in combination with the slow speed? Wouldn't it be optimal to lower the power and cut it twice?

@redbeardengineered Жыл бұрын

Potentially. I'm still a noob too. Probably ran it too hot. Cheers Deine

@APWPaint 5 ай бұрын

I missed the kurf part. I see how you figured it out but how do you apply it? I use "Creative Space" and can't figure out how to apply the kurf.

@redbeardengineered 5 ай бұрын

I think you can set the kurf on the box generator. As far as which to use, you'll probably have to do some testing with your machine. The defaults worked for me.