How to make a Coleman Lantern Airtube Purge Tool

Рет қаралды 1,163

Ай бұрын

In this video I show you how I made a Coleman pump tube purge tool. This tool uses compressed air to unclog the air tube that is on the end of the pump tube after the check valve. This tube can get plugged if old/stale fuel is left to dry in the fount (aka tank)
If you enjoyed this video and if you downloaded any of my build document, please consider buying me a coffee. I would appreciate your support:
www.buymeacoffee.com/MikeFreda
If you want one of these tools and don't want to make one, please DM me for more information.
Build Document: drive.google.com/file/d/1HcmytFsR29U8Ct0f_eAG9C9ay9wksCX0/view?usp=sharing
Tooling:
1/4 x 18 NPT: amzn.to/4bKvzGg
1/4" x 32 UNEF die (Older Check Valve Thread) : amzn.to/4bEFEV6
8 x 32 Tap and Drill (Newer Check Valve Thread): amzn.to/3K9CrRM
M6 x 0.75 Tap: amzn.to/4bnUXlp
1/4" x 28 NF Tap: amzn.to/4dPsruP
1/4" x 28 NF Die: amzn.to/3V3Cjtt
** 1/4" x 32 UNEF Tap (you could use this instead of the 1/4" x 28 tap and die set): amzn.to/3ylyKWu
Air Fitting: amzn.to/44M9SU8
Presta Valve: amzn.to/3WQN3fZ
Camera:
Canon M50 (Sigma 16mm 1.4f lens)
Rode Wireless Mic II
Lighting:
Neewer CB100 Video Light
Neewer 26" Soft Box
About This Channel:
This channel has a wide variety of content. I’m interested in many things and topics. I create videos on things I like and what I feel my subscribers would like as well.
This channel is basically about two things:
1.) Show you how to MAKE things, FIX things, TIPS on how to do things and to give you IDEAS on how to make your life a bit easier! I encourage you to use your hands the to learn something new!
2.) People say I do fun and interesting things and have interesting hobbies. I like to share that with you and I hope this inspires you to do things and to get out there as well!
Disclaimer: Some of this links go to my website and some are affiliate links where I’ll earn a small commission if you make a purchase at no additional cost to you.

Пікірлер: 20

@Dominic.Minischetti 7 күн бұрын

Everyone one of those are so cool! 👍🏻

@reddevil8078 Ай бұрын

Good job on my tool design

@pauldeary Ай бұрын

Clever design

@MikeFreda Ай бұрын

Thanks. Was a bit of a head scratcher. Cheers.

@jerryberryhill3619 Ай бұрын

Awesome work

@MikeFreda Ай бұрын

Thanks. Cheers.

@3putter3 Ай бұрын

Good job

@MikeFreda Ай бұрын

Thanks!

@texaswoc3461 5 күн бұрын

Now, if you only sold those!

@MikeFreda 5 күн бұрын

I can make some extra. Please PM me for details. Cheers.

@richardbormans4393 Ай бұрын

Mike, Thanks for the instructive video. However looking up the 1/8"x32 NEF die I saw your Amazon link is for the uxcell 1/4-28 UNF Round Die. Further looking for the 1/8"x32 NEF die did not get results. I looked up in the Taylortool product catalogue and the smallest nearest die was 1/4"X32 NEF. Can you please give directions where to obtain the 1/8"x32 NEF die?

@MikeFreda Ай бұрын

Thanks for pointing it out. Corrections have been made. One thing that you can do to save some costs is just get a 1/4" x 32 tap and you can omit getting the 1/4" x 28 tap and die set. I did mine using 1/4" x 28 since that's what I has in my tool drawer. Cheers

@richardbormans4393 Ай бұрын

@@MikeFreda Thank you for your quick response. I am looking for the proper die for making your valve removal tool suitable for the inner thread of the newer check valve (Coleman 425F stove). Is that the 8x32 you mention? Is there a specific type of thread (designation) to take into account, UNC or other?

@MikeFreda Ай бұрын

You're welcome. 8x32 is a UNC pitch. There is only one type in this size. It's very common. When making a Check Valve removal tool in this size, I don't use a Die, just a tap. I purchase a 1" long 8x32 stainless machine bolt and tap/screw into the end of the rod.

@richardbormans4393 Ай бұрын

@@MikeFreda Thanks again Mike. You mean by the rod in which you tap the 8x32, the 1/4" rod?

@MikeFreda Ай бұрын

Yes. That’s the easiest and cheapest way to do it.

@pchris6662 Ай бұрын

I am now afraid my old lantern might be clogged. It’s been sitting for a few years. Uh oh…

@PaulBearden-be1pe Ай бұрын

I don't mean to be disrespekful. I bawt one of those from some one else off eBay an used it on a millatary stove an a lanturn fount I even filled it with carb cleaner an used my air compressor an it dident clear the tube

@MikeFreda Ай бұрын

Thanks for commenting. You probably have more going on here. I would recommend removing the check valve and using the hydraulic method I described in my other video. Another option is to use a tool that has a grease fitting. No tool is 100% perfect and sometimes you have to think outside the box. Cheers.